BACK AND BICEP

1. Place a dumbbell on each side of a flat bench.
2. Place your right knee on the end of the bench.
3. Bend your torso from the waist until your upper body is parallel to the floor, while placing your right hand on the bench in front of you for support.
4. With your left hand, pick up the dumbbell with an overhand grip. The palm of your hand should be facing into you.
5. Keep your lower back straight. This is the start position.
6. Using your back muscles, pull the dumbbell straight up to the side of your chest, keeping your upper arm close to your side. Exhale as you do so.
7. At the top of the movement, hold for a count of one and squeeze your back muscles.
8. Return to the start position inhaling as you do so. Repeat.
9. Complete all repetitions for one side before switching sides.

This exercise can be performed  using a cable station, with a stirrup handle attached to either the high or low pulley.

1. Stand tall with a tight core and flat back. Hold a pair of dumbbells at your side with an overhand grip. Bend slightly at the knees as you push your hips back. Keep your chest and head up. Upper body should be almost parallel with the floor.
2. With your elbows at a 60-degree angle, bring the dumbbells up. Pause when your upper arm is parallel with the floor. Contract the muscle then slowly return the dumbbells to the starting point.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bend slightly at the knees and forward at the hips. Maintain a braced core and flat back throughout.
3. Leading with your elbows, pull the handles of the resistance band back, bringing your shoulder blades closer together. Hold this contraction and slowly release to the starting position.

1. Stand tall with a tight core and flat back. Hold a pair of water bottles at your side with an overhand grip. Bend slightly at the knees as you push your hips back. Keep your chest and head up. Upper body should be almost parallel with the floor.
2. With your elbows at a 60-degree angle, bring the water bottles up. Pause when your upper arm is parallel with the floor. Contract the muscle then slowly return the water bottles to the starting point.

1. Connect a V-bar attachment to the low pulley on a cable station or cable rowing machine.
2.  Sit down at the station and place your feet on the foot pads or crossbar provided, while keeping your knees slightly bent.
3. Lean forward, keeping your back straight and grip the V-bar handles with both hands.
4. Keeping your arms fully extended pull back until your torso is at a 90-degree angle from your legs.
5. Your back should be slightly arched, with your chest should be pushed out. This is the start position.
6. Keeping your torso stationary, pull the handles back towards you while squeezing your back muscles.
7. Keep your arms close to your sides until your hands reach your abdomen. Exhale as you perform this movement.
8. Hold for a count of one.
9. Inhale as you return to the start position in a smooth movement.
10. Repeat.

Do not swing or rock back and forth as you perform this exercise. Doing so can cause lower back injury. <strong></strong> You can perform this exercise using a straight bar instead of a V-Bar. You can use an underhand or overhand grip.

1. Stand tall with a tight core and flat back. Hold a pair of dumbbells at your side with an overhand grip. Bend slightly at the knees as you push your hips back. Keep your chest and head up. Upper body should be almost parallel with the floor.
2. With your elbows at a 60-degree angle, bring the dumbbells up. Pause when your upper arm is parallel with the floor. Contract the muscle then slowly return the dumbbells to the starting point.

1. Stand tall with a tight core and flat back. Hold a pair of water bottles at your side with an overhand grip. Bend slightly at the knees as you push your hips back. Keep your chest and head up. Upper body should be almost parallel with the floor.
2. With your elbows at a 60-degree angle, bring the water bottles up. Pause when your upper arm is parallel with the floor. Contract the muscle then slowly return the water bottles to the starting point.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bend slightly at the knees and forward at the hips. Maintain a braced core and flat back throughout.
3. Leading with your elbows, pull the handles of the resistance band back, bringing your shoulder blades closer together. Hold this contraction and slowly release to the starting position.

1. Set up a cable station with a straight bar attachment connected to the low pulley.
2. Stand close to the station, feet shoulder width apart either side of the pulley.
3. Grip the bar with a shoulder width underhand grip.
4. Keep your elbows close to your sides.
5. Curls your arms upward from the elbows in a smooth arc.
6. Continue until your forearms are vertical with your palms facing your shoulders. Hold for a count of one while flexing your biceps.
7. Lower the bar back to the starting position in a smooth motion.
8. Repeat.

1. Stand straight holding a barbell with an underhand grip, your hands shoulder width apart and your arms fully extended towards the floor.
2. Keep your elbows close to your sides.Your palms should be facing away from you. This is the start position.
3. Keeping your upper arms stationary, curl the barbell forward and up in a smooth arcing motion while exhaling. Only your forearms should move.
4. Continue upwards until  the bar is at shoulder level with your biceps fully contracted. Hold for a count of one while squeezing your biceps.
5. Inhale as you return to the starting position.
6. Repeat.

This exercise can be performed using a cable station, with a straight bar attachment connected to the lower pulley.

1. Sit on a flat bench holding a dumbbell in each hand  with an underhand grip.
2. Keep your back straight and shoulders back.
3. Keep your arms fully extended with your elbows close to your sides.
4. Rotate your palms so that they are facing in towards you. This is the start position.
5. Keeping your upper arms upper arm stationary, start to curl the dumbbells upwards in a smooth arc.
6. As you curl the dumbbells upwards rotate your wrists, so that your palms  face in towards you at the end of the movement.
7. Continue the movement until  the dumbbells are at shoulder level and your biceps are fully contracted.
8. Hold for a count of one as you squeeze your biceps.
9. return to the start position, rotating your wrists back to an underhand grip position.
10. Repeat.

This exercise can be performed by alternating between arms.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Let your arms hang by your side with your palms facing in to the side of your body.
3. Keep your elbows close to your sides.
4. Curl the dumbbells up towards your shoulders. Do not swing your hips to get the weight moving.
5. Continue raising the dumbbells until they are level with your shoulders with your palms facing in. Your forearm should be in a vertical position.
6. Squeeze or flex your bicep and hold for a count of one.
7. Slowly lower the dumbbells to the starting position.
8. Repeat.

You can also perform this exercise by alternating between left and right arms or one arm at a time.

1. Holding a dumbbell in each hand,stand with your feet shoulder width apart.
2. The dumbbells should be resting on your thighs with your palms facing in.
3. Lift the dumbbells straight up in single smooth movement until they are just below your chin making sure to keep your shoulders back and your elbows out.
4. At the top of the movement, flex or squeeze your biceps and forearms. Hold for a count of one.
5. Return to the starting position slowly to keep tension on the muscles.
6. Repeat.

This exercise can be performed using a barbell,EZ bar or a cable station with a straight bar or EZ bar attachment.

1. Stand with your back straight, holding a barbell with an overhand grip slightly less than shoulder width apart.
2. The bar should be level with the tops of your thighs.
3. Keep your arms extended with a slight bend at the elbows. This is the start position.
4. Exhale and using the sides of your shoulders lift the bar.
5. As you do so, raise your elbows up and out to the side.
6. Keep the bar close to your body as you raise it.
7. Continue  lifting the bar until it is just below your chin. Pause for a count of one.
8. Return to the start position in a single smooth movement. Inhale as you do so.
9. Repeat.

This exercise can be performed using a straight bar attached to a low pulley or using dumbbells.

1. Attach a straight bar to the low pulley on the cable station.
2. Stand facing the station with your feet shoulder width apart either side of the pulley.
3. Grip the bar with an overhand grip, with your hands shoulder width apart and arms fully extended.
4. Keep your shoulders back.
5. Raise the bar straight up in one smooth movement, until it is just below your chin.
6. Hold for a count of one while squeezing your biceps and forearms.
7. Slowly lower to the start position and repeat.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Let your arms hang by your side with your palms facing in to the side of your body.
3. Keep your elbows close to your sides.
4. Curl the dumbbells up towards your shoulders. Do not swing your hips to get the weight moving.
5. Continue raising the dumbbells until they are level with your shoulders with your palms facing in. Your forearm should be in a vertical position.
6. Squeeze or flex your bicep and hold for a count of one.
7. Slowly lower the dumbbells to the starting position.
8. Repeat.

You can also perform this exercise by alternating between left and right arms or one arm at a time.

1. Stand straight holding a barbell with an underhand grip, your hands shoulder width apart and your arms fully extended towards the floor.
2. Keep your elbows close to your sides.Your palms should be facing away from you. This is the start position.
3. Keeping your upper arms stationary, curl the barbell forward and up in a smooth arcing motion while exhaling. Only your forearms should move.
4. Continue upwards until  the bar is at shoulder level with your biceps fully contracted. Hold for a count of one while squeezing your biceps.
5. Inhale as you return to the starting position.
6. Repeat.

This exercise can be performed using a cable station, with a straight bar attachment connected to the lower pulley.

1. Sit on a flat bench holding a dumbbell in each hand  with an underhand grip.
2. Keep your back straight and shoulders back.
3. Keep your arms fully extended with your elbows close to your sides.
4. Rotate your palms so that they are facing in towards you. This is the start position.
5. Keeping your upper arms upper arm stationary, start to curl the dumbbells upwards in a smooth arc.
6. As you curl the dumbbells upwards rotate your wrists, so that your palms  face in towards you at the end of the movement.
7. Continue the movement until  the dumbbells are at shoulder level and your biceps are fully contracted.
8. Hold for a count of one as you squeeze your biceps.
9. return to the start position, rotating your wrists back to an underhand grip position.
10. Repeat.

This exercise can be performed by alternating between arms.

1. Set up a cable station with a straight bar attachment connected to the low pulley.
2. Stand close to the station, feet shoulder width apart either side of the pulley.
3. Grip the bar with a shoulder width underhand grip.
4. Keep your elbows close to your sides.
5. Curls your arms upward from the elbows in a smooth arc.
6. Continue until your forearms are vertical with your palms facing your shoulders. Hold for a count of one while flexing your biceps.
7. Lower the bar back to the starting position in a smooth motion.
8. Repeat.

1. Holding a water bottle in each hand, stand with your feet shoulder width apart.
2. Let your arms hang by your side with your palms facing in to the side of your body.
3. Keep your elbows close to your sides.
4. Curl the water bottles up towards your shoulders. Do not swing your hips to get the weight moving.
5. Continue raising the water bottles until they are level with your shoulders with your palms facing in. Your forearm should be in a vertical position.
6. Squeeze or flex your bicep and hold for a count of one.
7. Slowly lower the water bottles to the starting position.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Holding the handles of the band in each hand, tighten your abdominals and straighten your lower back. Keep your chest up and gaze forward.
3. Using an underhand grip or hammer fist grip, slowly pull the band towards your shoulders. Keep your upper arm in place, moving only your forearms.
4. Once you reach the top of the movement, pause, and slowly lower the band to the starting position. Do not lock out your elbows.

1. Set up a cable station with a straight bar attached to the top pulley.
2. Sit on the seat facing the station. Keep your feet flat and planted firmly on the floor.
3. Using an overhand grip, hold the bar as wide as comfortable. (Your hands should be about 1 1/2 – 2 times body width apart.)
4. Lean back slightly without arching your back.
5. Pull the bar towards the top of your chest using your shoulders while arcing your elbows out to the sides of your body.
6. At the end of the movement squeeze you shoulders together slightly and hold for a count of one.
7. Return to the start position by arcing your elbows forward while relaxing your shoulders.
8. Repeat.

1. Standing under a pull-up bar, reach up and hold onto the bar with an overhand grip. Make sure your hands are about twice your shoulder width apart.
2. Keep your arms straight and hang from the bar so that your arms are taking all of your weight.
3. Keeping your body straight and not swinging your weight, pull your body up towards the bar by pulling your elbows down towards your torso at an angle.
4. Continue lifting until your chest is nearly touching the bar. You should feel a “squeeze” at the base of your lats (about midway down your back and to the side) as they contract.
5.  Once your lats have completely contracted at the top of the movement, slowly lower your body to the starting position.
6. Repeat.

By using a wide grip, your lats are doing most of the lift, rather than your biceps. It doesn't matter if you keep your legs straight or bent at the knees with your feet crossed. The important thing is that you do not use your legs to assist in lifting your body weight. As your strength increases, you can add weight by using a weight belt.

1. Stand with feet shoulder-width apart. Keep the lower back straight and the core tight. Reach up and grab a pull-down bar with a wide grip.
2. Keeping your arms straight with a very slight bend in the elbow, pull the bar down to your hips. Breathe out and flex your lats as you do so.
3. Pause and slowly return to the top of the movement. Do not let the weight rest against the stack. Repeat the movement.

1. Lie on a flat bench, holding a barbell on your chest with an overhand grip. (Your hands should be shoulder width apart)
2. Get into starting position, raising the bar above your chest by extending your arms, but do NOT lock your elbows.
3. Keeping your arms slightly bent, slower lower the weight in a smooth arc to a position behind your head by rotating your shoulders. (as if putting your hands in the air)
4. Keep moving the barbell behind your head until you feel a slight stretch in your chest. Hold for a count of one.
5. Return to the start position in a smooth revers arc.
6. Continue holding the weight above your chest, then repeat.

1. Lie with your upper back perpendicular on a bench.
2. Bend your knees and place your feet flat on the floor and flex your hips so that your body is in line.
3. Grasp a dumbbell between your hands under the inner plate, palms facing up.
4. Position the weight over your chest with your elbows slightly bent.
5. Keep your elbows bent as you lower the dumbbell over your head until your upper arms are in line with your torso.
6. To return to the starting position, pull the dumbbell up and over your chest.

Try to avoid raising your hips and maintain a small bend in your elbows throughout the movement.

1. Attach a straight bar to the low pulley on the cable station.
2. Stand facing the station with your feet shoulder width apart either side of the pulley.
3. Grip the bar with an overhand grip, with your hands shoulder width apart and arms fully extended.
4. Keep your shoulders back.
5. Raise the bar straight up in one smooth movement, until it is just below your chin.
6. Hold for a count of one while squeezing your biceps and forearms.
7. Slowly lower to the start position and repeat.

1. Stand with your back straight, holding a barbell with an overhand grip slightly less than shoulder width apart.
2. The bar should be level with the tops of your thighs.
3. Keep your arms extended with a slight bend at the elbows. This is the start position.
4. Exhale and using the sides of your shoulders lift the bar.
5. As you do so, raise your elbows up and out to the side.
6. Keep the bar close to your body as you raise it.
7. Continue  lifting the bar until it is just below your chin. Pause for a count of one.
8. Return to the start position in a single smooth movement. Inhale as you do so.
9. Repeat.

This exercise can be performed using a straight bar attached to a low pulley or using dumbbells.

1. Holding a dumbbell in each hand,stand with your feet shoulder width apart.
2. The dumbbells should be resting on your thighs with your palms facing in.
3. Lift the dumbbells straight up in single smooth movement until they are just below your chin making sure to keep your shoulders back and your elbows out.
4. At the top of the movement, flex or squeeze your biceps and forearms. Hold for a count of one.
5. Return to the starting position slowly to keep tension on the muscles.
6. Repeat.

This exercise can be performed using a barbell,EZ bar or a cable station with a straight bar or EZ bar attachment.

1. Place a dumbbell on each side of a flat bench.
2. Place your right knee on the end of the bench.
3. Bend your torso from the waist until your upper body is parallel to the floor, while placing your right hand on the bench in front of you for support.
4. With your left hand, pick up the dumbbell with an overhand grip. The palm of your hand should be facing into you.
5. Keep your lower back straight. This is the start position.
6. Using your back muscles, pull the dumbbell straight up to the side of your chest, keeping your upper arm close to your side. Exhale as you do so.
7. At the top of the movement, hold for a count of one and squeeze your back muscles.
8. Return to the start position inhaling as you do so. Repeat.
9. Complete all repetitions for one side before switching sides.

This exercise can be performed  using a cable station, with a stirrup handle attached to either the high or low pulley.

1. Stand tall with a tight core and flat back. Hold a pair of dumbbells at your side with an overhand grip. Bend slightly at the knees as you push your hips back. Keep your chest and head up. Upper body should be almost parallel with the floor.
2. With your elbows at a 60-degree angle, bring the dumbbells up. Pause when your upper arm is parallel with the floor. Contract the muscle then slowly return the dumbbells to the starting point.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bend slightly at the knees and forward at the hips. Maintain a braced core and flat back throughout.
3. Leading with your elbows, pull the handles of the resistance band back, bringing your shoulder blades closer together. Hold this contraction and slowly release to the starting position.

1. Stand tall with a tight core and flat back. Hold a pair of water bottles at your side with an overhand grip. Bend slightly at the knees as you push your hips back. Keep your chest and head up. Upper body should be almost parallel with the floor.
2. With your elbows at a 60-degree angle, bring the water bottles up. Pause when your upper arm is parallel with the floor. Contract the muscle then slowly return the water bottles to the starting point.

1. Sit on a military press bench or bench that has a back support, holding a dumbbell in each hand with an overhand grip.
2. Place the dumbbells on top of your thighs with your palms facing down.
3. Raise the dumbbells to your shoulders.
4. Rotate your wrists so that the palms of your hands are facing away from you. This is the start position.
5. As you exhale,  push the dumbbells up and over your head by extending your arms until the dumbbells touch at the top of the movement.
6. Pause for a count of one.
7. Slowly return to the start position inhaling as you do so.
8. Repeat.

This exercise can be performed standing or sitting on  flat bench. For people with lower back problems, the version described is better.

1. Holding a water bottle in each hand, stand straight, with your feet shoulder width apart.
2. Raise the water bottles to head height by rotating your arms forward and up.
3. Your triceps should be parallel to the floor and your elbows bent at 90 degrees. This is the start position.
4. Keeping your back straight and using only your arms, extend through your shoulders and elbows to drive the water bottles straight up, exhaling as you do so.
5. As your arms reach the fully extended position, bring them in towards each other until the water bottles touch lightly together.
6. Hold for a count of one, while squeezing your shoulder muscles.
7. In a controlled movement, return to the starting position, inhaling as you do so.
8. Repeat.

1. Place your left foot onto the middle of a resistance band. Step forward with the right. Tighten your abdominals and avoid arching your back.
2. Press the handles of the resistance band up and stop once your upper arms are parallel with the ground, making a scarecrow formation. The band should be behind your arms.
3. Slowly press the resistance band overhead. Do not lock out the elbows. Lower to the starting position and begin again.

1. With a dumbbell in each hand in a neutral grip,  lie face down on an incline bench. Your palms should be facing inwards.
2. Extend your arms out in front of you so that they are at right angles to the bench. Keep your legs stationary but with pressure on the balls of our feet and toes. This is the start position.
3. Keeping a slight bend in your elbows, move the weights  away from each other  in an arcing motion exhaling as you do so.
4. Continue expanding your arms until they are parallel to the floor.
5. Hold and squeeze your shoulder blades together
6. Return to the starting position inhaling as you do so.
7. Repeat .

1. Begin by holding a pair of dumbbells and standing with a braced core. Bend at the knees slightly and lean forward from the hips. Maintain a flat back throughout.
2. Keeping your elbows slightly bent throughout the movement, lift the dumbbells up and out to the side. Be sure to focus the contraction in the back of the shoulders.
3. Pause at the top of the movement then slowly bring the dumbbells to the starting position.

1. Adjust the cables so that the handles sit at chest height.
2. Grip the handle, across your body in a neutral grip, with both hands.
3. Keeping only a slight bend at your elbow, pull the cable back across your body using the muscles in your back.
4. Hold the flexed position for a full second before allowing the cable to pull you slowly back to the starting position.

1. Adjust the seat on the Rear Delt Machine so that your chest is against the padding and the handles are at shoulder level. Tighten your core throughout the movement.
2. Holding on to the handles in front of you, engage your rear delt muscles (back of the shoulder). Pull the weight, focusing all of the tension in your shoulder muscles.
3. Pause when the handles are at your sides then slowly return to the starting position. Do not allow the plate to touch the weight stack.

1. Begin by holding a pair of water bottles and standing with a braced core. Bend at the knees slightly and lean forward from the hips. Maintain a flat back throughout.
2. Keeping your elbows slightly bent throughout the movement, lift the water bottles up and out to the side. Be sure to focus the contraction in the back of the shoulders.
3. Pause at the top of the movement then slowly bring the water bottles to the starting position.

1. Lie prone on a swiss ball with your feet hip width apart. You can place your feet against a wall for better stability. Clasp your hands behind your head with elbows pointing out.
2. Engage your abs and raise your torso off the ball, hyperextending your spine.
3. Return your torso to the ball to the starting position.

1. Lie face down on a hyper extension bench with your upper thighs and lower hips on the support pad. You must be able to bend at the waist freely.
2. Lock your ankles under the footpads.
3. Start with your body in a straight line head to toe.
4. Place your arms across your chest, behind or at the side of your head.
5. Slowly bend forward by relacing your, back and abdominal muscles.
6. Continue as far as possible without rounding your back or raising your thighs from the support pad. You should feel a slight stretch in your hamstrings.Hold for a count of one.
7. Return to the start position by contracting your back and abdominal muscles until your body is once again straight. Do not arch your back up at the end of the movement. Pause and repeat.

As your strength and flexibility increase, you can hold a weight plate against your chest for extra resistance.

1. Place a loaded barbell in front of you. Position your feet wider than shoulder width. Have your toes pointing out away from the body. Tighten the core and straighten the lower back.
2. Bend at the knees, lowering your hips down above parallel. Take hold of the barbell with an overhand grip at shoulder width. Focusing the tension in your hamstrings, pull the barbell up. Be sure to keep the barbell close to your body.
3. Drive your hips forward at the top of the movement. Slowly reverse the movement and lower the barbell while maintaining a flat back.