Hamstrings, Quads, Glutes, and Calves

1. Set up an adductor machine by selecting and appropriate weight and adjusting the seat and leg pads to a comfortable position.
2. If fitted, grasp the handles on each side of the machine.
3. Keep your entire upper body straight and stationary with your back pressed firmly against the back rest. This is the start position.
4. While exhaling, press against the legs pads of the machine with your legs, and bring your thighs close together.
5. When you feel a slight stretching in your adductors, pause for a count of one squeezing them as you do so.
6. In a controlled movement, return to the start position, inhaling as you do so.
7. Repeat.

• Standing sideways with your left side facing the weight stack of a pulley machine, attach an ankle cuff to the right ankle.
• Hold the machine for balance if you need to and slowly lift your right leg up to the right side.
• Pause and slowly return your right leg to starting position.
• Repeat the movement.

1. Lie on your right side on top of a yoga mat or other soft surface.
2. Brace your core and make sure your body is in a straight line. Keep your right hand on the ground and your left hand on your hip.
3. Slowly lift the left leg into the air, keeping it straight during the exercise.
4. Slowly lower your left leg. Complete the set then repeat with the other leg.

1. On a mat or comfortable surface, lie on your left side. Place your left hand behind your head while placing your right hand across your body.
2. Bend your stacked knees so that your feet are behind you. Begin the movement by lifting the right knee up while keeping the feet together.
3. Pause at the top of the movement and slowly lower your right knee down to the starting position.

1. Stand with your feet hip width apart. Your toes should be pointing straight ahead or only slightly outward.
2. Cross your arms in front of your body, place your hands behind your head (prisoner squat) or at the sides of your head.
3.  Keep your weight on your heels and bend your knees while lowering your hips towards the ground as if you are sitting down on a chair.
4. Keep your back straight at all times.
5. Continue until you feel a slight stretch in your quadriceps. Pause for a count of one. Do not let your knees extend out beyond the level of your toes.
6. Return to the start position by pushing down through your heels and extending your hips forward until you are standing straight. Repeat.

1. Stand with your feet in a wide stance, with your toes slightly pointed outwards – like a sumo wrestler. Hold your hands together in front of your chest.
2. Keeping your back straight, lower your body towards the ground by bending your knees.
3. As you reach a fully squatting position (legs are bent at a 90-degree angle), hold the pose for 1 second before driving your feet into the floor and slowly push your body back up to the starting position.
4. For a bonus, tense your glutes at the top of the movement.

1. Stand straight with your feet shoulder width apart and place your hands on your hips. This is the start position.
2. Step forward with either leg in a long stride. Keep your other foot in place behind you.
3. Bend your knees as you do this so your body is lowered towards the ground. Keep your back straight throughout the movement.
4. Continue down until your front knee is just above the ground. (Your front leg should be bent 90 degrees at the knee)
5. Hold for a count of one.
6. Push down through your front heel and extend both knees to return to the start position.
7. Pause then repeat with your other leg. When you have lunged with both legs, that is one repetition.
8. Repeat.

Try to keep your hands on your hips at all times, using your obliques to keep your balance.

1. Begin by standing with dumbbells in hand at your sides.
2. Place your feet hip-width apart.
3. Take a big step to the right with your right foot, keeping your arms straight.
4.  Land with your heel followed by the rest of your foot and flex the right knee so that you lower your hip and body until your knee and hip are at a 90 degree angle. Keep your left leg only slightly angled.
5. Return to the starting position by extending your right hip and knee. Once they are straight, bring your foot back in to a standing tall position.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Place a bench in front of you. Hold a pair of dumbbells and stand facing the bench. Brace your core and keep your gaze straight ahead.
2. Bring your right knee up and step up on to the bench. Placing all of the effort in your right leg, bring your body up into a standing position on the bench.
3. Slowly lower yourself to the starting position and switch legs.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. With your feet shoulder-width apart, stand with water bottles as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Stand with your feet shoulder width apart while holding a light dumbbell to your chest. You should hold the dumbbell by one end between your hands, with the other end extending down your torso. This is the start position.
2. Squat down keeping your slightly arched and pushing your hips back.
3. Continue down until your thighs are parallel to the floor.
4. Hold for a count of one.
5. Return to the start position.
6. Repeat.

This exercise can also be performed with a kettlebell.

1. Stand up straight with a tight core and flat back.
2. Position your feet wider than shoulder-width. Your toes should be facing out diagonally.
3. Holding a dumbbell with both hands in front of you, look straight ahead and bend at the knees while driving your hips backward. Your knees should be following your toes in a diagonal line.
4. Complete this wide stance squat by having your thighs come parallel with the ground.
5. Pause and slowly return to the starting position without locking your knees.
6. Repeat.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Find a comfortable position on a leg-press machine with your feet placed, flat, about shoulder width apart.
2. Extend the resistance away from your body until your knees are at an almost locked position (never fully lock your knees).
3. Further extend the platform away from your body, by driving your toes forward, into a tip-toe position.
4. Hold this fully-extended position for 1 second, before lowering the platform to your extended-leg, flat-footed position.

Do not perform if you have had recent knee injuries.

1. Sitting on a calf raise machine, position your upper thighs under the top pad. The pad should be resting just above your knees.
2. Place the balls of your feet on the foot plate.
3. Keeping the balls of your feet in position, lower your heels as far as possible.
4. Slowly raise your heels as if standing on your toes. Continue as far as possible until you feel a stretch in your lower calves. Hold for a count of one.
5. Slowly lower your heels back to the starting position and repeat.

If the machine isn't equipped with foot plates, you can use barbell plates placed under the machine to increase your range of motion. Don't

1. Set up two weight plates on the ground next to each other. Position a loaded barbell across your trap muscles. Step on to the weight plates with the balls of your feet.
2. With a tight core and flat back, raise yourself up with your feet only. Pause at the top of the raise.
3. Slowly lower yourself down but do not touch the ground. Raise yourself back up.
4. Repeat.

1. Place an exercise step or something similar on the floor in front of you. It should be two or three inches high.
2. Holding a dumbbell in each hand, place your toes and the balls of your feet on the step. Make sure the arches of your feet are not on the step and your heels are on the floor.
3. Raise your heels as high as possible by pushing through the balls of your feet and toes while extending your ankles. Hold for a count of one.
4. Return to the starting position by bending your ankles until you feel a stretch in your calves.
5. Repeat.

1. Place your back flat against the back pad of the hack machine and position your shoulders under the shoulder pads.
2. Place your legs in a shoulder width stance with your toes pointed out slightly.
3. Grip the side handles of the machine and disengage the safety bars.
4. Straighten your legs, but do not lock your knees. This is the start position.
5. Inhale as you slowly lower the weight by bending your knees.
6. Continue down until the angle between your upper legs and your calves is slightly less than 90-degrees. Your outer knee should be in line with your toes. Do not extend your knees past your toes. Hold for a count of one.
7. Return to the start position by pushing down through your heels and extending your legs, exhaling as you do so. When you reach the starting position,hold for a count of one.
8. Repeat

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. Standing tall with a tight core and flat back, hold a barbell or a pair of dumbbells in front of you. Hands should be slightly wider than shoulder-width.
2. Maintaining a tight core and flat back, bend your knees slightly and push your hips back. Keep your arms extended and the weight close to the body. Once you feel the contraction in the back of your legs, slowly return to the starting position.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Place a barbell on the floor and stand facing it with your feet shoulder width apart, toes pointing forward and your knees slightly bent. This is the start position.
2. As you exhale, bend at the waist keeping your back straight and knees slightly bent until you feel tension in your hamstrings.
3. Grasp the barbell with an overhand grip. Your arms should be fully extended with your hands spaced shoulder width apart.
4. Lift the barbell by extending your hips and waist in a smooth action until you have returned to the upright position, inhaling as you do so.
5. Pause for a count of 1-2.
6. Return the barbell to the floor or just above it by repeating step two.
7. Repeat.

This exercise should be avoided by those who suffer from lower back problems. To avoid injury, keep your back and torso straight at all times throughout this movement. This exercise can be performed using dumbbells or a straight bar attached to the low pulley of a cable station.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. Sit on a leg extension machine and place your  legs under the pad with your feet pointed forward. The pad should rest on your shins just above your feet and you will need to adjust it to suit.
2. Grip the hand bars (if fitted) firmly. This is the start position.
3. Using  only your quadriceps, fully extend your legs exhaling as you do so. Hold for a count of one.
4. Return to the start position in a smooth movement as you inhale,.
5. The angle at your knee should not go past 90-degrees.
6. Repeat.

This exercise can be performed one leg at a time.

1. Lie on an exercise mat with your knees bent so that your feet are flat on the floor.
2. Raise one leg off the floor and bend your knee up towards your chest. Yhis is the start position.
3. Perform the exercise by pushing down through your other heel and pushing your hips up, raising your glutes off the mat. Continue until your hips are in a straight line with your torso. Hold for a count of one.
4. Return to the start position by lowering your hip to the floor.
5. Complete all the repetitions for one set before changing legs.

1. Lie on an exercise mat with your knees bent so that your feet are flat on the floor. Keep your back straight.
2. Place your hands out to your sides palms flat for stability.
3. Raise your glutes off the floor by extending your hips upward while pushing down through you heels.
4. Continue until your back, hips and thighs are in a straight line. Hold for a count of one.
5. Return to the start position by lowering your hips back to the floor.
6. Pause then repeat.

1. Place a barbell on the floor and stand facing it with your feet shoulder width apart, toes pointing forward and your knees slightly bent. This is the start position.
2. As you exhale, bend at the waist keeping your back straight and knees slightly bent until you feel tension in your hamstrings.
3. Grasp the barbell with an overhand grip. Your arms should be fully extended with your hands spaced shoulder width apart.
4. Lift the barbell by extending your hips and waist in a smooth action until you have returned to the upright position, inhaling as you do so.
5. Pause for a count of 1-2.
6. Return the barbell to the floor or just above it by repeating step two.
7. Repeat.

This exercise should be avoided by those who suffer from lower back problems. To avoid injury, keep your back and torso straight at all times throughout this movement. This exercise can be performed using dumbbells or a straight bar attached to the low pulley of a cable station.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Stand tall with a tight core while holding a pair of dumbbells. Keeping your chest up and your gaze straight ahead, shift all of your bodyweight to your left foot. Bend the right knee, allowing the right foot to lift off the ground.
2. Maintaining a flat back, tilt your upper body forward. Do not allow the dumbbells to pull you down. Control your descent. Simultaneously, allow the right foot to counterbalance the shift in weight.
3. Feel the contraction in your hamstrings and pause once your upper body is parallel with the ground. Slowly return to the starting position.

1. Stand up straight with a tight core and flat back.
2. Position your feet wider than shoulder-width. Your toes should be facing out diagonally.
3. Holding a dumbbell with both hands in front of you, look straight ahead and bend at the knees while driving your hips backward. Your knees should be following your toes in a diagonal line.
4. Complete this wide stance squat by having your thighs come parallel with the ground.
5. Pause and slowly return to the starting position without locking your knees.
6. Repeat.

1. Set a barbell on a rack at your shoulder height.
2. Step under the bar and rest the back of your shoulders against the bar. Do not put the bar on your neck.
3. Hold on to the bar using an overhand grip so that your palms are facing forward.
4. Lift the barbell off the rack by pushing up with your legs while straightening your torso.
5. Step away from the rack and position your legs in a wider than shoulder width position and with your toes slightly pointed out.
6. Keep your head up and look straight ahead at all times, as looking down will put you off balance.
7. Ensure your back is straight. This is the start position.
8. As you inhale, slowly lower the bar by bending your knees while keeping a straight posture with your head up.
9. Continue down until the angle between you upper legs and calves is slightly less than 90-degrees . As a guide, the front of your knees should be in line with your toes. Do not allow your knees to extend out beyond your toes.
10. Hold for a count of one.
11. As you exhale, raise the bar back to the start position, by pushing through your heels as you straighten your legs.
12. Pause for a count of one.
13. Repeat.

This is an exercise which carries some risk. If you have back issues, substitute this exercise for the dumbbell squat or leg press instead. Never slouch your back forward as this can cause back injury. This exercise is best performed inside a squat rack for safety purposes.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Select an appropriate weight for the plate you will be using. Place it next to where you will be laying.
2. Lay on flat on your back. Bend your knees, bringing your feet towards your hips. Bring the plate up and on to your pelvic area.
3. Tighten your core, flatten your back, and make sure your feet are firmly on the ground. Raise your hips up, creating a straight line from your head to your knees.
4. Slowly lower your hips and repeat the movement.

1. Position your upper back on a padded bench so that your body runs perpendicular to the bench. 
2. Align your feet so they are about shoulder width apart, with the soles flat on the box with your back and hips elevated from the floor.
3. Slowly lower your body into the gap between the bench and the box allowing your toes to point upward as you do so.
4. Lift your body upwards using the muscles in your lower back and glutes all the way to the top of the extension.
5. Tense you glutes holding the top position before lowering your body back down for the next rep.

1. Lie on an exercise mat with your knees bent so that your feet are flat on the floor. Keep your back straight.
2. Place your hands out to your sides palms flat for stability.
3. Raise your glutes off the floor by extending your hips upward while pushing down through you heels.
4. Continue until your back, hips and thighs are in a straight line. Hold for a count of one.
5. Return to the start position by lowering your hips back to the floor.
6. Pause then repeat.