Phase 1: Workout 1 - Lower Body 

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Standing tall with a tight core and flat back, hold a barbell or a pair of dumbbells in front of you. Hands should be slightly wider than shoulder-width.
2. Maintaining a tight core and flat back, bend your knees slightly and push your hips back. Keep your arms extended and the weight close to the body. Once you feel the contraction in the back of your legs, slowly return to the starting position.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Place a barbell on the floor and stand facing it with your feet shoulder width apart, toes pointing forward and your knees slightly bent. This is the start position.
2. As you exhale, bend at the waist keeping your back straight and knees slightly bent until you feel tension in your hamstrings.
3. Grasp the barbell with an overhand grip. Your arms should be fully extended with your hands spaced shoulder width apart.
4. Lift the barbell by extending your hips and waist in a smooth action until you have returned to the upright position, inhaling as you do so.
5. Pause for a count of 1-2.
6. Return the barbell to the floor or just above it by repeating step two.
7. Repeat.

This exercise should be avoided by those who suffer from lower back problems. To avoid injury, keep your back and torso straight at all times throughout this movement. This exercise can be performed using dumbbells or a straight bar attached to the low pulley of a cable station.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.