Legs and Glutes

1. Standing with a braced core and flat back, bring your hands together at chest height. Position your feet to be at hip-width.
2. Beginning with the right foot, step backward and across your left foot. Simultaneously, bend the left knee and drop it towards the ground.
3. Stop when the front right knee is parallel with the ground. Push off the ground with your right foot and return to the starting position.

1. Stand straight – that’s the starting position. Step forward with your left leg and slowly lower your body until your front knee is bent at least 90 degrees, while your rear knee is just off the floor. Keep your torso upright the entire time. Look forward.
2. Pause, then push off your left foot off the floor and return to the starting position as quickly as you can.
3. On your next rep, step forward with your right leg. Continue to alternate back and forth—doing one rep with your left, then one rep with your right.

1. Stand tall with a tight core and make sure your feet are shoulder-width apart. Bring your hands together for balance.
2. Step directly to the left, leaving your right foot in place. Bend the left knee and pause once the upper left thigh is parallel to the ground. Your right leg should be completely straight.
3. Contract the hamstring muscle then push off the ground to return to the starting position. Repeat on the right side. Alternate this movement.

1. Place your feet at shoulder width apart while keeping your chest up and your abdominals braced.
2. Begin the movement by swinging your arms up towards your shoulders. At the same time, bend at the knees and drive your hips back like you’re sitting in a chair.
3. Once your upper thighs are parallel with the ground, pause, then drive your hips forward to return to the starting position.

1. Stand straight – that’s the starting position. Step forward with your left leg and slowly lower your body until your front knee is bent at least 90 degrees, while your rear knee is just off the floor. Keep your torso upright the entire time. Look forward.
2. Pause, then push off your left foot off the floor and return to the starting position as quickly as you can.
3. On your next rep, step forward with your right leg. Continue to alternate back and forth—doing one rep with your left, then one rep with your right.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. With your feet shoulder-width apart, stand with water bottles as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Stand up straight with a tight core and flat back.
2. Position your feet wider than shoulder-width. Your toes should be facing out diagonally.
3. Holding a dumbbell with both hands in front of you, look straight ahead and bend at the knees while driving your hips backward. Your knees should be following your toes in a diagonal line.
4. Complete this wide stance squat by having your thighs come parallel with the ground.
5. Pause and slowly return to the starting position without locking your knees.
6. Repeat.

1. Set a barbell on a rack at your shoulder height.
2. Step under the bar and rest the back of your shoulders against the bar. Do not put the bar on your neck.
3. Hold on to the bar using an overhand grip so that your palms are facing forward.
4. Lift the barbell off the rack by pushing up with your legs while straightening your torso.
5. Step away from the rack and position your legs in a wider than shoulder width position and with your toes slightly pointed out.
6. Keep your head up and look straight ahead at all times, as looking down will put you off balance.
7. Ensure your back is straight. This is the start position.
8. As you inhale, slowly lower the bar by bending your knees while keeping a straight posture with your head up.
9. Continue down until the angle between you upper legs and calves is slightly less than 90-degrees . As a guide, the front of your knees should be in line with your toes. Do not allow your knees to extend out beyond your toes.
10. Hold for a count of one.
11. As you exhale, raise the bar back to the start position, by pushing through your heels as you straighten your legs.
12. Pause for a count of one.
13. Repeat.

This is an exercise which carries some risk. If you have back issues, substitute this exercise for the dumbbell squat or leg press instead. Never slouch your back forward as this can cause back injury. This exercise is best performed inside a squat rack for safety purposes.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Standing on something soft, such as an exercise mat, place both hands behind your head and gently bring your right knee down to the ground.
2. Follow with your left knee so that you are kneeling on the mat, with your hands behind your head and your back nice and straight.
3. Lift your right knee up placing your right foot in front of you. Bring your left foot forward and drive upward through your right heel to bring you back to starting position.
4. Repeat the same movement, but leading with your left leg.

1. Select an appropriate weight for the plate you will be using. Place it next to where you will be laying.
2. Lay on flat on your back. Bend your knees, bringing your feet towards your hips. Bring the plate up and on to your pelvic area.
3. Tighten your core, flatten your back, and make sure your feet are firmly on the ground. Raise your hips up, creating a straight line from your head to your knees.
4. Slowly lower your hips and repeat the movement.

1. Position your upper back on a padded bench so that your body runs perpendicular to the bench. 
2. Align your feet so they are about shoulder width apart, with the soles flat on the box with your back and hips elevated from the floor.
3. Slowly lower your body into the gap between the bench and the box allowing your toes to point upward as you do so.
4. Lift your body upwards using the muscles in your lower back and glutes all the way to the top of the extension.
5. Tense you glutes holding the top position before lowering your body back down for the next rep.

1. Lie on an exercise mat with your knees bent so that your feet are flat on the floor. Keep your back straight.
2. Place your hands out to your sides palms flat for stability.
3. Raise your glutes off the floor by extending your hips upward while pushing down through you heels.
4. Continue until your back, hips and thighs are in a straight line. Hold for a count of one.
5. Return to the start position by lowering your hips back to the floor.
6. Pause then repeat.

1. On a mat or comfortable surface, lie on your left side. Place your left hand behind your head while placing your right hand across your body.
2. Bend your stacked knees so that your feet are behind you. Begin the movement by lifting the right knee up while keeping the feet together.
3. Pause at the top of the movement and slowly lower your right knee down to the starting position.

1. Lie on your right side on top of a yoga mat or other soft surface.
2. Brace your core and make sure your body is in a straight line. Keep your right hand on the ground and your left hand on your hip.
3. Slowly lift the left leg into the air, keeping it straight during the exercise.
4. Slowly lower your left leg. Complete the set then repeat with the other leg.

1. Position yourself on the ground supporting yourself on your hands and knees. Hold the handles of a resistance band in each hand. Hook the middle of the band on your left foot, pushing it back until the slack tightens.
2. Brace your core and maintain a flat back as you kick your left leg back and up.
3. Slowly return your leg to the starting position, not allowing the knee to touch the ground. Repeat the movement.

• Attach an ankle strap around your right ankle. Stand tall in front of a cable machine with a flat back and tight core. Use the cable machine for balance, if necessary.
• While balancing on your left foot, move your right foot up and back. Pause at the top of the movement then slowly bring the foot down. Do not let your right foot touch the ground before repeating.
• Once finished, repeat on the other side.

1. Lie with your back flat on an exercise mat and your feet resting on top of a Swiss ball.
2. Use your feet to roll the ball away from you until your legs are fully extended and your ankles are on top of the ball. This is the start position.
3. Keep your shoulders flat on the ground and press down with your feet to raise your hips off the floor.
4. Bend your knees, so that the ball is pulled towards you and continue as far as is comfortable. Hold for a count of one.
5. Return to the starting position by extending your legs until they are straight.
6. Repeat.

1. Lie on the ground with a TRX Suspension Strap at your feet. Lift both your feet into the strap, making sure they are secure. Tighten your core and place your hands at your sides.
2. Drive your hips up while maintaining a straight line with your body. Curl your feet in, moving them towards your butt. Maintain balance with your hands on the ground.
3. Once your feet reach your butt, slowly extend your feet back to the starting position. Do not allow your hips to drop. Contract the core during the entire movement.

1. Place an exercise step or something similar on the floor in front of you. It should be two or three inches high.
2. Holding a dumbbell in each hand, place your toes and the balls of your feet on the step. Make sure the arches of your feet are not on the step and your heels are on the floor.
3. Raise your heels as high as possible by pushing through the balls of your feet and toes while extending your ankles. Hold for a count of one.
4. Return to the starting position by bending your ankles until you feel a stretch in your calves.
5. Repeat.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Sitting on a calf raise machine, position your upper thighs under the top pad. The pad should be resting just above your knees.
2. Place the balls of your feet on the foot plate.
3. Keeping the balls of your feet in position, lower your heels as far as possible.
4. Slowly raise your heels as if standing on your toes. Continue as far as possible until you feel a stretch in your lower calves. Hold for a count of one.
5. Slowly lower your heels back to the starting position and repeat.

If the machine isn't equipped with foot plates, you can use barbell plates placed under the machine to increase your range of motion. Don't

1. Set up two weight plates on the ground next to each other. Position a loaded barbell across your trap muscles. Step on to the weight plates with the balls of your feet.
2. With a tight core and flat back, raise yourself up with your feet only. Pause at the top of the raise.
3. Slowly lower yourself down but do not touch the ground. Raise yourself back up.
4. Repeat.

1. Adjust the seated leg curl machine to position the footpad just above your heels.
2. Sit upright and engage your abs as you position your legs in front of you.
3. Begin to curly your legs back slowly towards you and flex your calf muscles as you do so.
4. Return to the starting position by extending the legs in front of you again.

Tip: Try not to swing the weight or execute the movement too quickly.

1. Lie face down on a leg curl machine and lock your heels under the foot pad. Make sure your legs are fully extended and the foot pads are resting on the back of your ankles.
2. If the machine is equipped with handles, grip them. If not, grip the front of the pad you are lying on.
3. Remaining flat on the bench, with no arching of your spine, curl your legs up in a smooth arcing motion by bending your knees until your hamstrings are fully contracted. Hold for a count of one.
4. Slowly lower your legs to the starting position in a smooth arcing motion.
5. Repeat

Don't use so much weight for this exercise that you need to swing or jerk the weight up. Doing so can cause injury to your lower back and / or hamstrings. Start with a lower weight until your strength increases.

1. Begin with a light weight and stand facing the machine. Position one leg for the lift by hooking it under the weight pad.
2. Make sure the pads are in a comfortable position around your ankle in order to involve the heel in the movement. Don’t position the pads too high on the calf.
3. Grab hold of the support handles.
4. Flex your knee and lift the pad upwards as far as you can towards your buttocks as you exhale.
5. Lower the leg to the starting position.

1. Lie on the ground with a TRX Suspension Strap at your feet. Lift both your feet into the strap, making sure they are secure. Tighten your core and place your hands at your sides.
2. Drive your hips up while maintaining a straight line with your body. Curl your feet in, moving them towards your butt. Maintain balance with your hands on the ground.
3. Once your feet reach your butt, slowly extend your feet back to the starting position. Do not allow your hips to drop. Contract the core during the entire movement.