Bum Routine

1. Stand straight with your feet shoulder width apart and place your hands on your hips. This is the start position.
2. Step forward with either leg in a long stride. Keep your other foot in place behind you.
3. Bend your knees as you do this so your body is lowered towards the ground. Keep your back straight throughout the movement.
4. Continue down until your front knee is just above the ground. (Your front leg should be bent 90 degrees at the knee)
5. Hold for a count of one.
6. Push down through your front heel and extend both knees to return to the start position.
7. Pause then repeat with your other leg. When you have lunged with both legs, that is one repetition.
8. Repeat.

Try to keep your hands on your hips at all times, using your obliques to keep your balance.

1. Stand with your feet hip width apart. Your toes should be pointing straight ahead or only slightly outward.
2. Cross your arms in front of your body, place your hands behind your head (prisoner squat) or at the sides of your head.
3.  Keep your weight on your heels and bend your knees while lowering your hips towards the ground as if you are sitting down on a chair.
4. Keep your back straight at all times.
5. Continue until you feel a slight stretch in your quadriceps. Pause for a count of one. Do not let your knees extend out beyond the level of your toes.
6. Return to the start position by pushing down through your heels and extending your hips forward until you are standing straight. Repeat.

1. Stand with your feet in a wide stance, with your toes slightly pointed outwards – like a sumo wrestler. Hold your hands together in front of your chest.
2. Keeping your back straight, lower your body towards the ground by bending your knees.
3. As you reach a fully squatting position (legs are bent at a 90-degree angle), hold the pose for 1 second before driving your feet into the floor and slowly push your body back up to the starting position.
4. For a bonus, tense your glutes at the top of the movement.

1. Stand straight with your feet shoulder width apart and place your hands on your hips. This is the start position.
2. Step forward with either leg in a long stride. Keep your other foot in place behind you.
3. Bend your knees as you do this so your body is lowered towards the ground. Keep your back straight throughout the movement.
4. Continue down until your front knee is just above the ground. (Your front leg should be bent 90 degrees at the knee)
5. Hold for a count of one.
6. Push down through your front heel and extend both knees to return to the start position.
7. Pause then repeat with your other leg. When you have lunged with both legs, that is one repetition.
8. Repeat.

Try to keep your hands on your hips at all times, using your obliques to keep your balance.

1. Set up an adductor machine by selecting and appropriate weight and adjusting the seat and leg pads to a comfortable position.
2. If fitted, grasp the handles on each side of the machine.
3. Keep your entire upper body straight and stationary with your back pressed firmly against the back rest. This is the start position.
4. While exhaling, press against the legs pads of the machine with your legs, and bring your thighs close together.
5. When you feel a slight stretching in your adductors, pause for a count of one squeezing them as you do so.
6. In a controlled movement, return to the start position, inhaling as you do so.
7. Repeat.

• Standing sideways with your left side facing the weight stack of a pulley machine, attach an ankle cuff to the right ankle.
• Hold the machine for balance if you need to and slowly lift your right leg up to the right side.
• Pause and slowly return your right leg to starting position.
• Repeat the movement.

1. Lie on your right side on top of a yoga mat or other soft surface.
2. Brace your core and make sure your body is in a straight line. Keep your right hand on the ground and your left hand on your hip.
3. Slowly lift the left leg into the air, keeping it straight during the exercise.
4. Slowly lower your left leg. Complete the set then repeat with the other leg.

1. On a mat or comfortable surface, lie on your left side. Place your left hand behind your head while placing your right hand across your body.
2. Bend your stacked knees so that your feet are behind you. Begin the movement by lifting the right knee up while keeping the feet together.
3. Pause at the top of the movement and slowly lower your right knee down to the starting position.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. Set up a  barbell on a rack  at just below shoulder level.
2. Step under the bar placing the back of your shoulders under it. Do not rest the bar on your neck.
3. Grip the the bar using an overhand grip with your elbows bent to90 degrees or slightly more. Less of an angle means your hands are too close together which can cause instability of balance.
4. Lift the barbell clear of the rack by  pushing with your legs, while straightening your torso.
5. Step away from the rack.
6. Step forward with your right leg and squat down through your hips. Keep your back straight  and be careful to maintain your balance. Inhale as you lower yourself.
7. Continue lowering your body until your left knee is nearly touching the floor.
8. Return to the start position b pushing through your heel,exhaling as you do so.
9. Complete all the repetitions for one leg before switching.

This exercise requires a great deal of balance. If you suffer from balance problems, it is best either avoid it, or just use your own body weight while holding on to a steady object. Never perform any exercise with a barbell on your back if you suffer from balance problems. For safety, this exercise is best performed inside a squat rack.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Adjust the seated leg curl machine to position the footpad just above your heels.
2. Sit upright and engage your abs as you position your legs in front of you.
3. Begin to curly your legs back slowly towards you and flex your calf muscles as you do so.
4. Return to the starting position by extending the legs in front of you again.

Tip: Try not to swing the weight or execute the movement too quickly.

1. Lie face down on a leg curl machine and lock your heels under the foot pad. Make sure your legs are fully extended and the foot pads are resting on the back of your ankles.
2. If the machine is equipped with handles, grip them. If not, grip the front of the pad you are lying on.
3. Remaining flat on the bench, with no arching of your spine, curl your legs up in a smooth arcing motion by bending your knees until your hamstrings are fully contracted. Hold for a count of one.
4. Slowly lower your legs to the starting position in a smooth arcing motion.
5. Repeat

Don't use so much weight for this exercise that you need to swing or jerk the weight up. Doing so can cause injury to your lower back and / or hamstrings. Start with a lower weight until your strength increases.

1. Begin with a light weight and stand facing the machine. Position one leg for the lift by hooking it under the weight pad.
2. Make sure the pads are in a comfortable position around your ankle in order to involve the heel in the movement. Don’t position the pads too high on the calf.
3. Grab hold of the support handles.
4. Flex your knee and lift the pad upwards as far as you can towards your buttocks as you exhale.
5. Lower the leg to the starting position.

1. Lie on the ground with a TRX Suspension Strap at your feet. Lift both your feet into the strap, making sure they are secure. Tighten your core and place your hands at your sides.
2. Drive your hips up while maintaining a straight line with your body. Curl your feet in, moving them towards your butt. Maintain balance with your hands on the ground.
3. Once your feet reach your butt, slowly extend your feet back to the starting position. Do not allow your hips to drop. Contract the core during the entire movement.

1. Bring yourself to the ground, lying on your back with your hands at your sides. Carefully, insert one foot at a time into hanging TRX bands. Bend at the knees.
2. Maintaining balance with your hands on the floor, drive your hips up, forming a straight line with your body.
3. Pause and feel the contraction in your glutes then slowly lower yourself to the starting position.

1. Lie on an exercise mat with your knees bent so that your feet are flat on the floor. Keep your back straight.
2. Place your hands out to your sides palms flat for stability.
3. Raise your glutes off the floor by extending your hips upward while pushing down through you heels.
4. Continue until your back, hips and thighs are in a straight line. Hold for a count of one.
5. Return to the start position by lowering your hips back to the floor.
6. Pause then repeat.

1. Lie with your back flat on an exercise mat and your feet resting on top of a Swiss ball.
2. Use your feet to roll the ball away from you until your legs are fully extended and your ankles are on top of the ball. This is the start position.
3. Keep your shoulders flat on the ground and press down with your feet to raise your hips off the floor.
4. Bend your knees, so that the ball is pulled towards you and continue as far as is comfortable. Hold for a count of one.
5. Return to the starting position by extending your legs until they are straight.
6. Repeat.

1. Secure a pair of suspension straps. Facing the straps, hold one handle in each handle.
2. Bringing your arms to your side, make sure the straps are tight.
3. Bend at the knees and slowly push your hips back while keeping your chest and head up. You core and lower back will remain tight.
4. Once your upper thighs are parallel with the floor, slowly return to the starting position, keeping the knees slightly bent. Repeat.

1. Place your feet at shoulder width apart while keeping your chest up and your abdominals braced.
2. Begin the movement by swinging your arms up towards your shoulders. At the same time, bend at the knees and drive your hips back like you’re sitting in a chair.
3. Once your upper thighs are parallel with the ground, pause, then drive your hips forward to return to the starting position.

1. Hold a kettlebell with both hands in an over hand grip.
2. Stand straight, with your legs slightly wider than shoulder width apart.
3. Lean forward at your waist slightly and bend your knees as if getting ready to squat.
4. Keep your back arched and your head facing forward.
5. Let your arms hang loosely.
6. Swing the kettlebell back between your legs while exhaling.
7. In an explosive movement, force the kettle forward and back up in front of you, either to eye level or above head height by thrusting forward with your hips and rotating your shoulders.
8. Continue for the desired number of repetitions or time.

1. Standing tall with a tight core and flat back, hold a barbell or a pair of dumbbells in front of you. Hands should be slightly wider than shoulder-width.
2. Maintaining a tight core and flat back, bend your knees slightly and push your hips back. Keep your arms extended and the weight close to the body. Once you feel the contraction in the back of your legs, slowly return to the starting position.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Place a barbell on the floor and stand facing it with your feet shoulder width apart, toes pointing forward and your knees slightly bent. This is the start position.
2. As you exhale, bend at the waist keeping your back straight and knees slightly bent until you feel tension in your hamstrings.
3. Grasp the barbell with an overhand grip. Your arms should be fully extended with your hands spaced shoulder width apart.
4. Lift the barbell by extending your hips and waist in a smooth action until you have returned to the upright position, inhaling as you do so.
5. Pause for a count of 1-2.
6. Return the barbell to the floor or just above it by repeating step two.
7. Repeat.

This exercise should be avoided by those who suffer from lower back problems. To avoid injury, keep your back and torso straight at all times throughout this movement. This exercise can be performed using dumbbells or a straight bar attached to the low pulley of a cable station.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.