Biceps and Triceps

1. Clean two kettlebells to your shoulders. Clean the kettlebells to your shoulders by extending through the legs and hips as you pull the kettlebells towards your shoulders. Rotate your wrists as you do so. This will be your starting position.
2. Begin to squat by flexing your hips and knees, lowering your hips between your legs. Maintain an upright, straight back as you descend as low as you can.
3. At the bottom, reverse direction and stand by extending your knees and hips and pushing down through your heels. As you do so, press both kettlebells overhead by extending your arms straight up, using the momentum from the squat to help drive the weights upward.
4. As you begin the next repetition, return the weights to the shoulders.

1. Stand with your feet shoulder-width apart with dumbbells above your shoulders.
2. Squat down keeping your back flat and your knees over your toes.
3. Push through your heels to return to standing while pressing the dumbbells overhead with arms fully extended.
4. Return to starting position and repeat.

1. Stand with feet hip width apart and grasp a barbell with an overhand grip.
2. Make sure your hands are placed slightly wider than shoulder-width.
3. Bring the bar to chest height and slightly retract your head back.
4. Bend the knees, hips and ankles to dip slightly.
5. Use your legs to explosively drive your body upwards and drive the barbell off your shoulders, extending your arms overhead.
6. Lower the bar to your shoulders and repeat.

1. Place a kettlebell in front of you
2. Place your right leg forward and rest your left leg on the ball of your left foot.(Similar to a lunge stance)
3. Bend your knees slightly as you bend over to get in the starting position.
4. Keep your back straight.
5. Rest your right hand on your right knee for stability.
6. Grip the kettlebell with a neutral grip in your left hand.
7. Pull the kettlebell up to your stomach, retracting your shoulder blade and flexing your elbow. Keep your back straight. Lower and repeat.
8. Complete all the repetitions for one side before switching.

1. Place a dumbbell on each side of a flat bench.
2. Place your right knee on the end of the bench.
3. Bend your torso from the waist until your upper body is parallel to the floor, while placing your right hand on the bench in front of you for support.
4. With your left hand, pick up the dumbbell with an overhand grip. The palm of your hand should be facing into you.
5. Keep your lower back straight. This is the start position.
6. Using your back muscles, pull the dumbbell straight up to the side of your chest, keeping your upper arm close to your side. Exhale as you do so.
7. At the top of the movement, hold for a count of one and squeeze your back muscles.
8. Return to the start position inhaling as you do so. Repeat.
9. Complete all repetitions for one side before switching sides.

This exercise can be performed  using a cable station, with a stirrup handle attached to either the high or low pulley.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bend slightly at the knees and forward at the hips. Maintain a braced core and flat back throughout.
3. Leading with your elbows, pull the handles of the resistance band back, bringing your shoulder blades closer together. Hold this contraction and slowly release to the starting position.

1. Hold a kettlebell by the handle.
2. Lift the kettlebell to your shoulder by extending through your legs and hips as you pull the kettlebell towards your shoulder, rotating your wrist as you do so. Your palm should face forward with the kettlebell hanging at the back of your hand. This is the start position.
3. Lower your body by bending your knees while keeping your torso straight and upright.
4. Do not perform a full squat, instead travel down about midway into a squat position.
5. Without pausing, reverse direction, driving down through your heels, to create momentum.
6. As you rise up, press the kettlebell straight up over your head by extending and locking your arms.
7. Land with your knees slightly bent to absorb the impact.
8. Lower the weight to start position
9. Repeat.
10. Complete all repetitions for one side before switching.

Use your body's momentum to drive the weight up, assisting your arm.

• With dumbbells at your sides, stand with your feet slightly wider than shoulder-width apart and fee pointing slightly outward. Look straight ahead.
• Squat down until your upper legs are parallel with the floor by bending your knees, keep your back straight.
• With an explosive but controlled movement, push up through your heels and press the dumbbells above your head as you return to standing position.
• Still standing, slowly lower the dumbbells down to your chest and then down to your sides by extending your arms.
• Repeat.

1. Stand holding a dumbbell in each hand using an overhand grip.
2. Your arms should be fully extended and your feet shoulder width apart. This is the starting position.
3. Keeping your upper arms stationary and your back straight, curl the weights up towards your shoulders exhaling as you do so. Use only your forearms for this movement.
4. Continue curling the dumbbells up until they are at shoulder level and your biceps are fully contracted.
5. Hold for a count of one as you squeeze your biceps..
6. Return to the starting position in a smooth arc, inhaling as you do so.
7. Repeat.

Do not swing your hips or arms to use momentum for this exercise. This exercise can be performed using a barbell, straight bar or E-Z bar attachment connected to the low pulley of a cable station.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Let your arms hang by your side with your palms facing in to the side of your body.
3. Keep your elbows close to your sides.
4. Curl the dumbbells up towards your shoulders. Do not swing your hips to get the weight moving.
5. Continue raising the dumbbells until they are level with your shoulders with your palms facing in. Your forearm should be in a vertical position.
6. Squeeze or flex your bicep and hold for a count of one.
7. Slowly lower the dumbbells to the starting position.
8. Repeat.

You can also perform this exercise by alternating between left and right arms or one arm at a time.

1. Holding a water bottle in each hand, stand with your feet shoulder width apart.
2. Let your arms hang by your side with your palms facing in to the side of your body.
3. Keep your elbows close to your sides.
4. Curl the water bottles up towards your shoulders. Do not swing your hips to get the weight moving.
5. Continue raising the water bottles until they are level with your shoulders with your palms facing in. Your forearm should be in a vertical position.
6. Squeeze or flex your bicep and hold for a count of one.
7. Slowly lower the water bottles to the starting position.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Holding the handles of the band in each hand, tighten your abdominals and straighten your lower back. Keep your chest up and gaze forward.
3. Using an underhand grip or hammer fist grip, slowly pull the band towards your shoulders. Keep your upper arm in place, moving only your forearms.
4. Once you reach the top of the movement, pause, and slowly lower the band to the starting position. Do not lock out your elbows.

1. Set up a cable station with a straight bar attachment connected to the low pulley.
2. Stand close to the station, feet shoulder width apart either side of the pulley.
3. Grip the bar with a shoulder width underhand grip.
4. Keep your elbows close to your sides.
5. Curls your arms upward from the elbows in a smooth arc.
6. Continue until your forearms are vertical with your palms facing your shoulders. Hold for a count of one while flexing your biceps.
7. Lower the bar back to the starting position in a smooth motion.
8. Repeat.

1. Stand straight holding a barbell with an underhand grip, your hands shoulder width apart and your arms fully extended towards the floor.
2. Keep your elbows close to your sides.Your palms should be facing away from you. This is the start position.
3. Keeping your upper arms stationary, curl the barbell forward and up in a smooth arcing motion while exhaling. Only your forearms should move.
4. Continue upwards until  the bar is at shoulder level with your biceps fully contracted. Hold for a count of one while squeezing your biceps.
5. Inhale as you return to the starting position.
6. Repeat.

This exercise can be performed using a cable station, with a straight bar attachment connected to the lower pulley.

1. Sit on a flat bench holding a dumbbell in each hand  with an underhand grip.
2. Keep your back straight and shoulders back.
3. Keep your arms fully extended with your elbows close to your sides.
4. Rotate your palms so that they are facing in towards you. This is the start position.
5. Keeping your upper arms upper arm stationary, start to curl the dumbbells upwards in a smooth arc.
6. As you curl the dumbbells upwards rotate your wrists, so that your palms  face in towards you at the end of the movement.
7. Continue the movement until  the dumbbells are at shoulder level and your biceps are fully contracted.
8. Hold for a count of one as you squeeze your biceps.
9. return to the start position, rotating your wrists back to an underhand grip position.
10. Repeat.

This exercise can be performed by alternating between arms.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Let your arms hang by your side with your palms facing in to the side of your body.
3. Keep your elbows close to your sides.
4. Curl the dumbbells up towards your shoulders. Do not swing your hips to get the weight moving.
5. Continue raising the dumbbells until they are level with your shoulders with your palms facing in. Your forearm should be in a vertical position.
6. Squeeze or flex your bicep and hold for a count of one.
7. Slowly lower the dumbbells to the starting position.
8. Repeat.

You can also perform this exercise by alternating between left and right arms or one arm at a time.

1. Lie with your upper back perpendicular on a bench.
2. Bend your knees and place your feet flat on the floor and flex your hips so that your body is in line.
3. Grasp a dumbbell between your hands under the inner plate, palms facing up.
4. Position the weight over your chest with your elbows slightly bent.
5. Keep your elbows bent as you lower the dumbbell over your head until your upper arms are in line with your torso.
6. To return to the starting position, pull the dumbbell up and over your chest.

Try to avoid raising your hips and maintain a small bend in your elbows throughout the movement.

• With slightly bent knees and a tight core, hold a medicine ball in front of you at hip-level.
• Begin by raising the medicine ball upward above your head with both hands.
• Keeping your elbows bent, forcefully throw the ball at the ground.
• Catch the ball as it bounces back up, and bring it back up above your head.
• Repeat this slam and catch movement.

1. Sit on a bench with back support.
2. Grip a dumbbell at one end using both hands. Your palms should be facing inward.
3. Hold the dumbbell overhead with your arms fully extended.  This is the the start position.
4. Keep your upper arms close to your head (biceps roughly level with your temples) and near to 90degrees to the floor.
5. Moving only your forearms, lower the dumbbell in a smooth arc behind your head until your forearms and biceps touch. Hold for a count of one.
6. Return to the start position by using the triceps to extend your arm and raise the dumbbell. Exhale as you do this.
7. Repeat.

This exercise can be performed standing. However, it places an extra strain on your back so is not recommended for people with lower back problems. You can also perform this exercise using an EZ bar or straight bar with a close grip behind your head, palms facing forward.

1. Attach a rope to the bottom pulley of a cable station.
2. Grip the rope with both hands using a neutral grip. Turn your body away from the cable station.
3. Fully extend your arms until your hands are directly above your head pointing to the ceiling.
4. Keep your elbows  close to your head. This is the start position.
5. Slowly lower the rope behind your head, keeping your upper arms stationary, inhaling as you do so.
6. When your triceps are fully extended, hold for a count of one while squeezing your triceps.
7. Return to the starting position by flexing your triceps  and extending your arms. Exhale as you do so.
8. Repeat.

This exercise can be performed  seated on a plain bench, or one that has a back support You  can also use a single dumbbell instead of the rope.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Push the handles of the band overhead while keeping a slight bend in the elbow. Brace your abdominals and do not arch your back.
3. Slowly lower your hands behind your head using only the forearms. The upper arms will stay in place with the elbow pointed up.
4. Push the handles back up, focusing the tension in the triceps.

1. Stand between two cable stations with the dumbbell grip handles attached to the high pulleys on each side of you.
2. Hold the handles with an overhand grip. Your arms should be outstretched.
3. Bend your knees and hips slightly so that you are leaning forward, but not too far.
4. Bend your elbows slightly and rotate your shoulders in towards the centre of your chest a little. Your elbows should be slightly behind you.
5. Use a hugging motion, keeping your elbows in a fixed, bent position to bring the grip attachments together in front of your chest.
6. Slowly return to the starting position until you feel a slight stretch in your chest muscles.
7. Repeat.

• Holding a pair of dumbbells, sit on a flat bench and slowly lower yourself back.
• Keep a tight core as you push the dumbbells above your chest. The dumbbells will be facing one another and held together.
• With a slight bend in the elbow, open up your chest and slowly lower the dumbbells to the sides.
• When the dumbbells are parallel with the ground, pause, and return to the starting position.

1. Sit on a pec deck machine with your back flat against the back rest.
2. Grip the handles and make sure your arms are parallel to the floor. If not parallel,adjust the seat or handles accordingly. This is the start position.
3. Exhale and slowly push the handles together  squeezing your chest to the middle as you do so. Hold for a count of one.
4. Inhale as you return to the starting position in a controlled movement.
5. Repeat.

This exercise can be performed using an exercise band or pulleys. There are a variety of  different machines with different placement of your forearms. With these,  place your forearms on the pad, with your elbow bent to 90 degrees. Perform the exercise by squeezing your elbows together.

1. Start by standing to the right of a flat bench with a dumbbell on the floor to your right.
2. Place your left knee on the bench with your left hand palm down n the bench in front of it. In this position, keep your back straight.
3. Pick up the dumbbell with your right hand using an overhand grip.
4. Raise your arm until it is in line with your body, keeping your elbow tucked into your side and bent to a 90 degree angle. Your forearm should be pointing straight down to the floor.
5. Extend your arm using your triceps to lift the weight until it is level with your shoulder.
6. Hold for a count of one while squeezing your tricep.
7. Lower to the starting position by bending your elbow to 90 degrees.Hold and repeat.
8. Complete the set for your right arm before changing stance to work your left arm.

Only your forearm should move during this exercise. Keep your elbow in line with your shoulders at all times throughout the movement.

1. Holding a pair of dumbbells with an overhand grip, stand tall with your chest up and core braced. Bend at the hips while keeping your back completely flat.
2. Once your upper body is parallel with the floor, bring your upper arms to your sides. Begin by pushing the dumbbells back and behind you.
3. Pause at the top of the movement and feel the contraction in your triceps. Slowly lower the dumbbells and begin again.

1. Attach a resistance band to a door frame or other stable surface. Grab the handles of the band and walk backward until the slack tightens.
2. Bend slightly at the knees and forward at the hips. Maintain a flat back throughout.
3. Bring your upper arms up and tight to your side. From here, you will pull the band back using the forearms only. The contraction will be felt exclusively in the triceps.
4. Slowly return to the starting position and begin again.

1. Holding a pair of water bottles with an overhand grip, stand tall with your chest up and core braced. Bend at the hips while keeping your back completely flat.
2. Once your upper body is parallel with the floor, bring your upper arms to your sides. Begin by pushing the water bottles back and behind you.
3. Pause at the top of the movement and feel the contraction in your triceps. Slowly lower the water bottles and begin again.

1. Set up a cable station with a straight bar on attached to the top pulley.
2. Grip the bar with an overhand grip,with your hands slightly less than shoulder width apart.
3. Position your feet shoulder width apart,with knees slightly bent for stability.
4. Pull the bar down until your forearms are parallel to the floor with your elbows close to your body and your wrists locked in a straight position. This is your staring point.
5. Moving only your forearms, push the bar down towards the floor until your arms are fully extended and you feel a stretch in your triceps. Hold for a count of one and squeeze your triceps.
6. Return to the start position moving your forearms only. Hold for a count of one then repeat.

Do not move your elbows or swing your hips for momentum during this movement.

1. Holding a pair of dumbbells with an overhand grip, stand tall with your chest up and core braced. Bend at the hips while keeping your back completely flat.
2. Once your upper body is parallel with the floor, bring your upper arms to your sides. Begin by pushing the dumbbells back and behind you.
3. Pause at the top of the movement and feel the contraction in your triceps. Slowly lower the dumbbells and begin again.

1. Attach a rope to the bottom pulley of a cable station.
2. Grip the rope with both hands using a neutral grip. Turn your body away from the cable station.
3. Fully extend your arms until your hands are directly above your head pointing to the ceiling.
4. Keep your elbows  close to your head. This is the start position.
5. Slowly lower the rope behind your head, keeping your upper arms stationary, inhaling as you do so.
6. When your triceps are fully extended, hold for a count of one while squeezing your triceps.
7. Return to the starting position by flexing your triceps  and extending your arms. Exhale as you do so.
8. Repeat.

This exercise can be performed  seated on a plain bench, or one that has a back support You  can also use a single dumbbell instead of the rope.

1. Sit on a bench with back support.
2. Grip a dumbbell at one end using both hands. Your palms should be facing inward.
3. Hold the dumbbell overhead with your arms fully extended.  This is the the start position.
4. Keep your upper arms close to your head (biceps roughly level with your temples) and near to 90degrees to the floor.
5. Moving only your forearms, lower the dumbbell in a smooth arc behind your head until your forearms and biceps touch. Hold for a count of one.
6. Return to the start position by using the triceps to extend your arm and raise the dumbbell. Exhale as you do this.
7. Repeat.

This exercise can be performed standing. However, it places an extra strain on your back so is not recommended for people with lower back problems. You can also perform this exercise using an EZ bar or straight bar with a close grip behind your head, palms facing forward.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Push the handles of the band overhead while keeping a slight bend in the elbow. Brace your abdominals and do not arch your back.
3. Slowly lower your hands behind your head using only the forearms. The upper arms will stay in place with the elbow pointed up.
4. Push the handles back up, focusing the tension in the triceps.

1. Stand with feet shoulder-width apart. Core is tight and back is flat. Hold a barbell with an overhand grip. Hands should be closer than shoulder-width.
2. Bring the barbell above your head with arms fully extended. Keep the elbows up and the upper arm in place. Lower the barbell behind your head until your forearms touch your biceps. Return to the top of the movement.

1. Sit on a bench with back support.
2. Grip a dumbbell at one end using both hands. Your palms should be facing inward.
3. Hold the dumbbell overhead with your arms fully extended.  This is the the start position.
4. Keep your upper arms close to your head (biceps roughly level with your temples) and near to 90degrees to the floor.
5. Moving only your forearms, lower the dumbbell in a smooth arc behind your head until your forearms and biceps touch. Hold for a count of one.
6. Return to the start position by using the triceps to extend your arm and raise the dumbbell. Exhale as you do this.
7. Repeat.

This exercise can be performed standing. However, it places an extra strain on your back so is not recommended for people with lower back problems. You can also perform this exercise using an EZ bar or straight bar with a close grip behind your head, palms facing forward.

1. Attach a rope to the bottom pulley of a cable station.
2. Grip the rope with both hands using a neutral grip. Turn your body away from the cable station.
3. Fully extend your arms until your hands are directly above your head pointing to the ceiling.
4. Keep your elbows  close to your head. This is the start position.
5. Slowly lower the rope behind your head, keeping your upper arms stationary, inhaling as you do so.
6. When your triceps are fully extended, hold for a count of one while squeezing your triceps.
7. Return to the starting position by flexing your triceps  and extending your arms. Exhale as you do so.
8. Repeat.

This exercise can be performed  seated on a plain bench, or one that has a back support You  can also use a single dumbbell instead of the rope.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Push the handles of the band overhead while keeping a slight bend in the elbow. Brace your abdominals and do not arch your back.
3. Slowly lower your hands behind your head using only the forearms. The upper arms will stay in place with the elbow pointed up.
4. Push the handles back up, focusing the tension in the triceps.

1. Set up a cable station with a straight bar on attached to the top pulley.
2. Grip the bar with an overhand grip,with your hands slightly less than shoulder width apart.
3. Position your feet shoulder width apart,with knees slightly bent for stability.
4. Pull the bar down until your forearms are parallel to the floor with your elbows close to your body and your wrists locked in a straight position. This is your staring point.
5. Moving only your forearms, push the bar down towards the floor until your arms are fully extended and you feel a stretch in your triceps. Hold for a count of one and squeeze your triceps.
6. Return to the start position moving your forearms only. Hold for a count of one then repeat.

Do not move your elbows or swing your hips for momentum during this movement.

1. Holding a pair of dumbbells with an overhand grip, stand tall with your chest up and core braced. Bend at the hips while keeping your back completely flat.
2. Once your upper body is parallel with the floor, bring your upper arms to your sides. Begin by pushing the dumbbells back and behind you.
3. Pause at the top of the movement and feel the contraction in your triceps. Slowly lower the dumbbells and begin again.

1. Begin by sitting on a flat bench. Hold the dumbbell at your side with an overhand grip. Tighten your core and flatten your back.
2. Bring the dumbbells up to shoulder height so that your palm are facing you. Push the dumbbells overhead. Rotate them as you do so.
3. At the height of the movement, your palms should be facing away from you. Pause, contract and slowly return to the starting point through the same rotation.

1. Sit on a military press bench or bench that has a back support, holding a dumbbell in each hand with an overhand grip.
2. Place the dumbbells on top of your thighs with your palms facing down.
3. Raise the dumbbells to your shoulders.
4. Rotate your wrists so that the palms of your hands are facing away from you. This is the start position.
5. As you exhale,  push the dumbbells up and over your head by extending your arms until the dumbbells touch at the top of the movement.
6. Pause for a count of one.
7. Slowly return to the start position inhaling as you do so.
8. Repeat.

This exercise can be performed standing or sitting on  flat bench. For people with lower back problems, the version described is better.

1. Holding a water bottle in each hand, stand straight, with your feet shoulder width apart.
2. Raise the water bottles to head height by rotating your arms forward and up.
3. Your triceps should be parallel to the floor and your elbows bent at 90 degrees. This is the start position.
4. Keeping your back straight and using only your arms, extend through your shoulders and elbows to drive the water bottles straight up, exhaling as you do so.
5. As your arms reach the fully extended position, bring them in towards each other until the water bottles touch lightly together.
6. Hold for a count of one, while squeezing your shoulder muscles.
7. In a controlled movement, return to the starting position, inhaling as you do so.
8. Repeat.

1. Place your left foot onto the middle of a resistance band. Step forward with the right. Tighten your abdominals and avoid arching your back.
2. Press the handles of the resistance band up and stop once your upper arms are parallel with the ground, making a scarecrow formation. The band should be behind your arms.
3. Slowly press the resistance band overhead. Do not lock out the elbows. Lower to the starting position and begin again.

1. Attach a rope to the bottom pulley of a cable station.
2. Grip the rope with both hands using a neutral grip. Turn your body away from the cable station.
3. Fully extend your arms until your hands are directly above your head pointing to the ceiling.
4. Keep your elbows  close to your head. This is the start position.
5. Slowly lower the rope behind your head, keeping your upper arms stationary, inhaling as you do so.
6. When your triceps are fully extended, hold for a count of one while squeezing your triceps.
7. Return to the starting position by flexing your triceps  and extending your arms. Exhale as you do so.
8. Repeat.

This exercise can be performed  seated on a plain bench, or one that has a back support You  can also use a single dumbbell instead of the rope.

1. Sit on a bench with back support.
2. Grip a dumbbell at one end using both hands. Your palms should be facing inward.
3. Hold the dumbbell overhead with your arms fully extended.  This is the the start position.
4. Keep your upper arms close to your head (biceps roughly level with your temples) and near to 90degrees to the floor.
5. Moving only your forearms, lower the dumbbell in a smooth arc behind your head until your forearms and biceps touch. Hold for a count of one.
6. Return to the start position by using the triceps to extend your arm and raise the dumbbell. Exhale as you do this.
7. Repeat.

This exercise can be performed standing. However, it places an extra strain on your back so is not recommended for people with lower back problems. You can also perform this exercise using an EZ bar or straight bar with a close grip behind your head, palms facing forward.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Push the handles of the band overhead while keeping a slight bend in the elbow. Brace your abdominals and do not arch your back.
3. Slowly lower your hands behind your head using only the forearms. The upper arms will stay in place with the elbow pointed up.
4. Push the handles back up, focusing the tension in the triceps.

• Adjust a cable pulley system with the handle resting at about shin level
• Stand next to the cable and pivot at the hips to bend over at about a 45-degree angle
• Reach across your body with the hand that’s farthest from the cable and take a firm grip of the handle
• Bring the handle across your body without rotating your torso, using mostly your lat muscle
• After tensing at the peak, allow the cable to pull its way, in a controlled way, back to the starting position

1. Sit on a military press bench or bench that has a back support, holding a dumbbell in each hand with an overhand grip.
2. Place the dumbbells on top of your thighs with your palms facing down.
3. Raise the dumbbells to your shoulders.
4. Rotate your wrists so that the palms of your hands are facing away from you. This is the start position.
5. As you exhale,  push the dumbbells up and over your head by extending your arms until the dumbbells touch at the top of the movement.
6. Pause for a count of one.
7. Slowly return to the start position inhaling as you do so.
8. Repeat.

This exercise can be performed standing or sitting on  flat bench. For people with lower back problems, the version described is better.

1. Holding a water bottle in each hand, stand straight, with your feet shoulder width apart.
2. Raise the water bottles to head height by rotating your arms forward and up.
3. Your triceps should be parallel to the floor and your elbows bent at 90 degrees. This is the start position.
4. Keeping your back straight and using only your arms, extend through your shoulders and elbows to drive the water bottles straight up, exhaling as you do so.
5. As your arms reach the fully extended position, bring them in towards each other until the water bottles touch lightly together.
6. Hold for a count of one, while squeezing your shoulder muscles.
7. In a controlled movement, return to the starting position, inhaling as you do so.
8. Repeat.

1. Place your left foot onto the middle of a resistance band. Step forward with the right. Tighten your abdominals and avoid arching your back.
2. Press the handles of the resistance band up and stop once your upper arms are parallel with the ground, making a scarecrow formation. The band should be behind your arms.
3. Slowly press the resistance band overhead. Do not lock out the elbows. Lower to the starting position and begin again.

1. Set up a preacher curl bench making sure that the seat is set at the right height for you. The seat shouldn’t be so low that you need to raise your shoulders, or so high that you need to lean over the support pad.
2. Rest you arms on the support pad with your triceps near the top and your elbows midway down the pad.
3. Grip the EZ curl bar with an underhand grip at shoulder width.
4. Curl the bar in towards your chin and upper chest in a single smooth arc. Hold for a count of one.
5. Lower the bar by extending your arms back to the starting position.

This exercise is designed to isolate and focus attention on the biceps. Therefore, resistance is stronger at the start of each repetition. So when you begin each repetition, don't explode upwards too quickly!