Full body

1. Begin by positioning yourself underneath a Smith Machine barbell. Make sure the bar is across your upper traps and NOT your neck.
2. Place your feet at shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Lower yourself until your thighs are parallel with the floor. Return to the starting position.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Sit at a Lat Pulldown machine and secure your legs underneath the padded surface. Select an appropriate weight on the stack. Reach up to grab the barbell, taking a close-grip. Your hands should be at or closer than shoulder-width.
2. Tighten your core and keep your chest up as you pull the barbell down and towards your chest. Be sure to pull with your lat muscles.
3. Once the bar is at your chest, slowly allow it to return to the starting position but don’t let the weight stack touch. Repeat.

1. Secure a pair of suspension straps. Stand facing the straps, brace your lower back, and tighten your core.
2. Lean back, letting the straps hold your weight. Your arms should be straight.
3. Pull yourself up with your back, maintaining a tight core.
4. Squeeze the back muscles and slowly lower yourself. Repeat.

1. Connect a V-bar attachment to the low pulley on a cable station or cable rowing machine.
2.  Sit down at the station and place your feet on the foot pads or crossbar provided, while keeping your knees slightly bent.
3. Lean forward, keeping your back straight and grip the V-bar handles with both hands.
4. Keeping your arms fully extended pull back until your torso is at a 90-degree angle from your legs.
5. Your back should be slightly arched, with your chest should be pushed out. This is the start position.
6. Keeping your torso stationary, pull the handles back towards you while squeezing your back muscles.
7. Keep your arms close to your sides until your hands reach your abdomen. Exhale as you perform this movement.
8. Hold for a count of one.
9. Inhale as you return to the start position in a smooth movement.
10. Repeat.

Do not swing or rock back and forth as you perform this exercise. Doing so can cause lower back injury. <strong></strong> You can perform this exercise using a straight bar instead of a V-Bar. You can use an underhand or overhand grip.

1. Position yourself with your back down on a flat bench placing the hands up on the bar using an underhand grip slightly wider than shoulder width apart.
2. After taking a deep breath in, extend the elbows and lift the bar up off the rack until elbows are extended but not locked. Pause for a brief movement as you fully extend your breath.
3. Lower the weight directly down to the chest as you breath inwards, keeping the movement pattern slow and steady.
4. Once just above the chest, pause, and then press directly up again, exhaling your breath.
5. Continue until all reps are completed and then re-rack the barbell.

1. Lie on a flat bench holding a dumbbell in each hand with an overhand grip.
2. Start by holding the dumbbells slightly wider than shoulder width apart above your shoulders. Your palms should be facing forward.
3. Slowly bend your elbows until they are at a 90 degree angle and your upper arms are parallel to the ground.
4. Push the weights up by straightening your arms.
5. As you push the weights up, move your arms in an arc to bring the dumbbells together, until they meet over the center of your chest. Hold for a count of one.
6. Lower the dumbbells by slowly bending your elbows back to 90 degrees.
7. Continue lowering your arms until they are a little lower than parallel to the floor. (Your elbows should be pointing slightly towards the floor and you should feel a stretch in your chest muscles and shoulders.)
8. Repeat

Be sure to concentrate on a balanced movement when lifting the dumbbells. Use both arms equally spaced and moving at the same speed.

1. Place a pair of dumbbells on the floor. Lie on your back in between the dumbbells. Bend your knees and move your feet towards your butt.
2. Grab the dumbbells and hold them above you. Allow your upper arms to remain on the floor. Begin the movement by pushing the dumbbells over your chest. Pause at the top and squeeze your chest muscles.
3. Slowly bring the weights down to the starting position, allowing your arms to rest for a brief moment before beginning the next repetition.

1. Sit on the seat with your upper chest just above the horizontal handles.
2. Push the foot lever until you are able to grasp the lever.
3. Gras the handles using a wide overhand grip and place your elbows out to the sides just below your shoulders.
4. Release the foot lever and press the hand lever out until your arms are fully extended.
5. Return the weight until your chest muscles are slightly stretched.

1. Get into position by placing your hands flat on the floor, directly below your shoulders.
2. Extend your legs out behind you, with only your toes and balls of your feet touching the floor.
3. Hold your body up and keep your back straight by tightening your abdominal muscles.
4. Your neck and head should be bent slightly back.
5. Lower your chest towards the ground by bending your elbows until your chest is just above the ground or you feel a stretching of your chest and shoulders. Hold for a count of one.
6. Press upwards from your chest and shoulders, straightening your arms as you return to the starting position. Hold for a count of one.
7. Repeat.

1. Hold a barbell with an overhand grip at shoulder width. You can also use a preacher curl bar if you feel too much pressure on the wrists. Stand tall with your chest up and core braced. You will keep your upper arms tight to your sides.
2. Begin the movement by bringing the barbell up towards your shoulders. Feel the contraction in the biceps and forearms.
3. Pause at the top and slowly return to the starting position.

1. Stand straight holding a barbell with an underhand grip, your hands shoulder width apart and your arms fully extended towards the floor.
2. Keep your elbows close to your sides.Your palms should be facing away from you. This is the start position.
3. Keeping your upper arms stationary, curl the barbell forward and up in a smooth arcing motion while exhaling. Only your forearms should move.
4. Continue upwards until  the bar is at shoulder level with your biceps fully contracted. Hold for a count of one while squeezing your biceps.
5. Inhale as you return to the starting position.
6. Repeat.

This exercise can be performed using a cable station, with a straight bar attachment connected to the lower pulley.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Let your arms hang by your side with your palms facing in to the side of your body.
3. Keep your elbows close to your sides.
4. Curl the dumbbells up towards your shoulders. Do not swing your hips to get the weight moving.
5. Continue raising the dumbbells until they are level with your shoulders with your palms facing in. Your forearm should be in a vertical position.
6. Squeeze or flex your bicep and hold for a count of one.
7. Slowly lower the dumbbells to the starting position.
8. Repeat.

You can also perform this exercise by alternating between left and right arms or one arm at a time.

1. Sit on a bench, holding a dumbbell in each hand. Your hands should be at your sides.
2. Bend forward at the hips while maintaining a tight core and flat back. Keep your gaze at the ground. Be sure to maintain this position along with a slight bend in your elbows at all times.
3. Extend your arms out to the side and guide the weight up. Your arms should come to parallel with the floor.
4. Pause, slowly lower the weight back to the starting position. Repeat.

1. Adjust the cables so that the handles sit at chest height.
2. Grip the handle, across your body in a neutral grip, with both hands.
3. Keeping only a slight bend at your elbow, pull the cable back across your body using the muscles in your back.
4. Hold the flexed position for a full second before allowing the cable to pull you slowly back to the starting position.

1. With a dumbbell in each hand in a neutral grip,  lie face down on an incline bench. Your palms should be facing inwards.
2. Extend your arms out in front of you so that they are at right angles to the bench. Keep your legs stationary but with pressure on the balls of our feet and toes. This is the start position.
3. Keeping a slight bend in your elbows, move the weights  away from each other  in an arcing motion exhaling as you do so.
4. Continue expanding your arms until they are parallel to the floor.
5. Hold and squeeze your shoulder blades together
6. Return to the starting position inhaling as you do so.
7. Repeat .

1. Begin by holding a pair of water bottles and standing with a braced core. Bend at the knees slightly and lean forward from the hips. Maintain a flat back throughout.
2. Keeping your elbows slightly bent throughout the movement, lift the water bottles up and out to the side. Be sure to focus the contraction in the back of the shoulders.
3. Pause at the top of the movement then slowly bring the water bottles to the starting position.

1. Holding a pair of dumbbells with an overhand grip, stand tall with your chest up and core braced. Bend at the hips while keeping your back completely flat.
2. Once your upper body is parallel with the floor, bring your upper arms to your sides. Begin by pushing the dumbbells back and behind you.
3. Pause at the top of the movement and feel the contraction in your triceps. Slowly lower the dumbbells and begin again.

1. Sit on a bench with back support.
2. Grip a dumbbell at one end using both hands. Your palms should be facing inward.
3. Hold the dumbbell overhead with your arms fully extended.  This is the the start position.
4. Keep your upper arms close to your head (biceps roughly level with your temples) and near to 90degrees to the floor.
5. Moving only your forearms, lower the dumbbell in a smooth arc behind your head until your forearms and biceps touch. Hold for a count of one.
6. Return to the start position by using the triceps to extend your arm and raise the dumbbell. Exhale as you do this.
7. Repeat.

This exercise can be performed standing. However, it places an extra strain on your back so is not recommended for people with lower back problems. You can also perform this exercise using an EZ bar or straight bar with a close grip behind your head, palms facing forward.

1. Attach a resistance band to a door frame or other stable surface. Grab the handles of the band and walk backward until the slack tightens.
2. Bend slightly at the knees and forward at the hips. Maintain a flat back throughout.
3. Bring your upper arms up and tight to your side. From here, you will pull the band back using the forearms only. The contraction will be felt exclusively in the triceps.
4. Slowly return to the starting position and begin again.

1. Holding a pair of water bottles with an overhand grip, stand tall with your chest up and core braced. Bend at the hips while keeping your back completely flat.
2. Once your upper body is parallel with the floor, bring your upper arms to your sides. Begin by pushing the water bottles back and behind you.
3. Pause at the top of the movement and feel the contraction in your triceps. Slowly lower the water bottles and begin again.

1. Sitting on a calf raise machine, position your upper thighs under the top pad. The pad should be resting just above your knees.
2. Place the balls of your feet on the foot plate.
3. Keeping the balls of your feet in position, lower your heels as far as possible.
4. Slowly raise your heels as if standing on your toes. Continue as far as possible until you feel a stretch in your lower calves. Hold for a count of one.
5. Slowly lower your heels back to the starting position and repeat.

If the machine isn't equipped with foot plates, you can use barbell plates placed under the machine to increase your range of motion. Don't

1. Adjust the pulley handle to chest height. Step out and away from the weight. Feet are shoulder-width. Stand with a tight core and flat back. Push the handle out in front of you. Keep elbows slightly bent.
2. Twist from the hips. Move arms across the body, achieving a full extension.
3. Return to starting position.
4. Once complete, do the same amount of sets/reps on the other side.

1. Secure a firm grip with both hands on an appropriately weighted dumbbell. Place your feet shoulder-width apart. Begin by moving the dumbbell up and over towards your right side.
2. Twist your body to bring the dumbbell down and to the left. Bend at the knees and drop your hips slightly. Make the motion of placing the dumbbell on the ground.
3. Repeat the movement, taking the dumbbell back up and overhead. Keep your arms straight throughout.

1. Sit on an exercise mat with your legs fully extended and your upper body upright.
2. Grip a weight plate between both hands.
3. Hold the plate out in front of your abdominals keeping your arms bent slightly.
4. Cross your your ankles and raise them off the floor slightly.
5. Bend your knees towards you slightly.
6. Lean back about 15 degrees to balance your body. This is the start position.
7. In a smooth motion,turn your torso to the left and touch the plate on the floor. Make sure you exhale as you do this.
8. Return to the start position inhaling as you do so.
9. Repeat the same movement, this time to your right side, again exhaling as you do so.
10. Return to start position and repeat.

When performing this exercise, use smooth controlled movements. Jerking or using momentum to swing the weight can cause serious lower back injury.