Arm Toning

1. Stand with your back straight, feet shoulder width apart, while holding a dumbbell in each hand with a neutral grip.
2. Hold your arms fully extended by your side, with your palms facing in to your body.
3. Keep your elbows close to your sides. This is the start position.
4. Keeping your arms fully extended and your torso stationary, lift the dumbbells out to your sides and up until they are at shoulder level. Exhale as you do so.
5. Hold for a count of one while squeezing your shoulder muscles.
6.  Return to the start position in a smooth controlled movement inhaling as you do so.
7. Repeat.

<strong> </strong>

1. Sit on a bench, holding a dumbbell in each hand. Your hands should be at your sides.
2. Maintain a flat back and tight core. Look straight ahead during the movement.
3. Be sure to maintain a slight bend in your elbows at all times.
4. Extend your arms out to the side and guide the weight up. Your arms should come to parallel with the floor.
5. Pause, slowly lower the weight back to the starting position. Repeat.

1. Place your left foot onto the middle of a resistance band. Step forward with the right. Tighten your abdominals and avoid arching your back.
2. Maintaining a slight bend in the elbows at all times, slowly raise your arms up from the sides of your body. Be sure to favor the front as you lift.
3. Once your arms reach parallel with the floor, pause, feel the contraction, and slowly lower back down.

1. Stand with your feet shoulder width apart and a dumbbell in each hand.
2. Keep your arms extended and by your sides and with your palms facing in.
3. Relax your shoulders so they hang as low as possible.
4. Raise the dumbbells by slowly lifting your shoulders in a shrugging motion. Hold for a count of one.
5. Slowly relax your shoulders to return to the start position.
6. Repeat.

You can also rotate your shoulders in a circular movement during this exercise. One direction on the lift, the opposite direction when lowering to the start position.

1. Place your feet shoulder width apart and using an overhand grip at a little more than shoulder width, hold a barbell in front of you.
2. Your arms should be fully extended towards the floor, palms facing in towards your thighs. This is the start position.
3. Exhale and raise or shrug your shoulders up in a slow controlled movement. Do not use your biceps to assist in lifting the barbell.
4. Continue as high as possible then hold for a count of one.
5. Return to the start position in a smooth movement, inhaling as you do so.
6. Pause then repeat.

You can rotate your shoulders when performing this exercise. However this is not recommended for people with shoulder problems.

1. Stand straight holding a dumbbell in each hand with an overhand grip.
2. Hold the dumbbells in in front of your thighs with your palms of the facing your thighs. Keep your arms fully extended. This is the start position.
3. Raise the left dumbbell out and upwards, while keeping a slight bend in your elbow. Your palms must always face down for this exercise.
4. Continue raising the dumbbell until you arm is a little above parallel to the floor. Exhale as you are raising the dumbbell.
5. Pause for a count of one.
6. Inhale and slowly lower the dumbbell to the start position.
7. As you lower the left dumbbell, begin to lift the right dumbbell, duplicating the movement.
8. When both dumbbells have been raised and lowered in a cycle, that is one repetition.
9. Repeat.

This exercise can be performed using both arms at the same time and also by substituting a barbell for the two dumbbells.

1. Holding the handle of a resistance band in each hand, step on the middle of the band with both feet. Stand up straight with a tight core and flat back.
2. Begin by lifting your hands straight up in front of you with an overhand grip. Be sure to keep a slight bend in the elbows at all times.
3. Pause at the top to feel the contraction then slowly lower the bands to the starting position.

1. Place a light-weighted barbell in front of you at your shins.
2. Squat down into position, driving your hips back. Keep your chest and head up. Place your hands in an overhand grip on the barbell.
3. Stand up with a tight core and flat back. Keeping a slight bend in the elbows, raise the bar up and in front of you. Pause when your arms are parallel with the ground.
4. Slowly lower the barbell to your hip. Repeat the movement.

1. Sit on a bench/chair with your back straight and your arms straight along your sides with the dumbbells help in an overhand grip.
2. Bring both dumbbells up in front of your body, keeping only a slight bend at your elbow.
3. Raise the dumbbells until they are both at about eye level and be sure to brace your core and keep your back supported by the bench/chair.  
4. Lower the dumbbells back down to your sides, and prepare for that next rep!

1. Stand tall with a tight core and flat back. Hold a weight plate, dumbbell or kettlebell with both hands in front of your hips. Be sure to use an overhand grip. You can also use a resistance band secured under your feet. Your feet should be shoulder-width apart.
2. With a slight bend in the elbows, raise the weight plate up and in front of you. Pause and squeeze the shoulders when you reach chest level.
3. Slowly lower the plate to the starting position, immediately moving into the next repetition.

1. Stand straight holing a dumbbell in each hand with a neutral grip.
2. Keep your arms fully extended with your palms facing in to your sides.
3. Keep your elbows tucked in to your sides. This is the start position.
4. Keeping your upper arm stationary, exhale and curl the dumbbells up towards your shoulders.
5. Continue  raising the dumbbells until your biceps are fully contracted and the dumbbells are at shoulder level.
6. Hold for a count of one and squeeze your biceps.
7. Return to the start position in a smooth movement, inhaling as you do so.
8. Repeat.

There are many ways to perform this movement. Other examples include; sitting with or without back support, using alternating arms and also using a cable station's lower pulley.

1. Stand at the cable station with your feet shoulder width apart and with a slight bend at the knee.
2. Grasp the rope with both hands and your palms facing inward.
3. Keeping your core strong and your elbows fixed at your sides pull the rope towards the top of your chest (only the lower portion of your arms should be moving).
4. Tense your biceps at the peak, and then slowly allow the rope to be pulled back down to the starting position.

1. Begin by sitting on a flat bench. Hold the dumbbell at your side with an overhand grip. Tighten your core and flatten your back.
2. Bring the dumbbells up to shoulder height so that your palm are facing you. Push the dumbbells overhead. Rotate them as you do so.
3. At the height of the movement, your palms should be facing away from you. Pause, contract and slowly return to the starting point through the same rotation.

1. Sit on a military press bench or bench that has a back support, holding a dumbbell in each hand with an overhand grip.
2. Place the dumbbells on top of your thighs with your palms facing down.
3. Raise the dumbbells to your shoulders.
4. Rotate your wrists so that the palms of your hands are facing away from you. This is the start position.
5. As you exhale,  push the dumbbells up and over your head by extending your arms until the dumbbells touch at the top of the movement.
6. Pause for a count of one.
7. Slowly return to the start position inhaling as you do so.
8. Repeat.

This exercise can be performed standing or sitting on  flat bench. For people with lower back problems, the version described is better.

1. Holding a water bottle in each hand, stand straight, with your feet shoulder width apart.
2. Raise the water bottles to head height by rotating your arms forward and up.
3. Your triceps should be parallel to the floor and your elbows bent at 90 degrees. This is the start position.
4. Keeping your back straight and using only your arms, extend through your shoulders and elbows to drive the water bottles straight up, exhaling as you do so.
5. As your arms reach the fully extended position, bring them in towards each other until the water bottles touch lightly together.
6. Hold for a count of one, while squeezing your shoulder muscles.
7. In a controlled movement, return to the starting position, inhaling as you do so.
8. Repeat.

1. Place your left foot onto the middle of a resistance band. Step forward with the right. Tighten your abdominals and avoid arching your back.
2. Press the handles of the resistance band up and stop once your upper arms are parallel with the ground, making a scarecrow formation. The band should be behind your arms.
3. Slowly press the resistance band overhead. Do not lock out the elbows. Lower to the starting position and begin again.

1. Holding a dumbbell in each hand, stand straight, with your feet shoulder width apart.
2. Raise the dumbbells to head height by rotating your arms forward and up.
3. Your triceps should be parallel to the floor and your elbows bent at 90 degrees. This is the start position.
4. Keeping your back straight and using only your arms, extend through your shoulders and elbows to drive the dumbbells straight up, ehaling as you do so.
5. As your arms reach the fully extended position, bring them in towards each other until the dumbbels touch lightly together.
6. Hold for a count of one, while squeezing your shoulder muscles.
7. In a controlled movement, return to the starting position, inhaling as you do so.
8. Repeat.

1. From a push-up position push your glutes upwards and walk your feet in so that you are in a downward-dog pose.
2. The shape of your body should look like a triangle from the side.
3. Lower your shoulders towards the ground by bending your elbows.
4. Allow your forehead to very lightly make contact with the ground before pushing upwards and away back into the starting position.

• Keep a tight core and flat back as you remain seated in the shoulder press machine.
• Look straight ahead as you hold on to the handles.
• Slowly, press the handles up above your head.
• Do not lock out your elbow.
• Slowly, bring the handles back down but do not let the weight stack touch.
• Repeat the movement.

1. Place your left foot onto the middle of a resistance band. Step forward with the right. Tighten your abdominals and avoid arching your back.
2. Press the handles of the resistance band up and stop once your upper arms are parallel with the ground, making a scarecrow formation. The band should be behind your arms.
3. Slowly press the resistance band overhead. Do not lock out the elbows. Lower to the starting position and begin again.

1. Holding a water bottle in each hand, stand straight, with your feet shoulder width apart.
2. Raise the water bottles to head height by rotating your arms forward and up.
3. Your triceps should be parallel to the floor and your elbows bent at 90 degrees. This is the start position.
4. Keeping your back straight and using only your arms, extend through your shoulders and elbows to drive the water bottles straight up, exhaling as you do so.
5. As your arms reach the fully extended position, bring them in towards each other until the water bottles touch lightly together.
6. Hold for a count of one, while squeezing your shoulder muscles.
7. In a controlled movement, return to the starting position, inhaling as you do so.
8. Repeat.

1. Stand tall with a tight core and flat back. Hold a pair of dumbbells at your side with an overhand grip. Bend slightly at the knees as you push your hips back. Keep your chest and head up. Upper body should be almost parallel with the floor.
2. With your elbows at a 60-degree angle, bring the dumbbells up. Pause when your upper arm is parallel with the floor. Contract the muscle then slowly return the dumbbells to the starting point.

1. Place a dumbbell on each side of a flat bench.
2. Place your right knee on the end of the bench.
3. Bend your torso from the waist until your upper body is parallel to the floor, while placing your right hand on the bench in front of you for support.
4. With your left hand, pick up the dumbbell with an overhand grip. The palm of your hand should be facing into you.
5. Keep your lower back straight. This is the start position.
6. Using your back muscles, pull the dumbbell straight up to the side of your chest, keeping your upper arm close to your side. Exhale as you do so.
7. At the top of the movement, hold for a count of one and squeeze your back muscles.
8. Return to the start position inhaling as you do so. Repeat.
9. Complete all repetitions for one side before switching sides.

This exercise can be performed  using a cable station, with a stirrup handle attached to either the high or low pulley.

1. Stand tall with a tight core and flat back. Hold a pair of water bottles at your side with an overhand grip. Bend slightly at the knees as you push your hips back. Keep your chest and head up. Upper body should be almost parallel with the floor.
2. With your elbows at a 60-degree angle, bring the water bottles up. Pause when your upper arm is parallel with the floor. Contract the muscle then slowly return the water bottles to the starting point.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bend slightly at the knees and forward at the hips. Maintain a braced core and flat back throughout.
3. Leading with your elbows, pull the handles of the resistance band back, bringing your shoulder blades closer together. Hold this contraction and slowly release to the starting position.

1. Holding a dumbbell in each hand,stand with your feet shoulder width apart.
2. The dumbbells should be resting on your thighs with your palms facing in.
3. Lift the dumbbells straight up in single smooth movement until they are just below your chin making sure to keep your shoulders back and your elbows out.
4. At the top of the movement, flex or squeeze your biceps and forearms. Hold for a count of one.
5. Return to the starting position slowly to keep tension on the muscles.
6. Repeat.

This exercise can be performed using a barbell,EZ bar or a cable station with a straight bar or EZ bar attachment.

1. Stand with your back straight, holding a barbell with an overhand grip slightly less than shoulder width apart.
2. The bar should be level with the tops of your thighs.
3. Keep your arms extended with a slight bend at the elbows. This is the start position.
4. Exhale and using the sides of your shoulders lift the bar.
5. As you do so, raise your elbows up and out to the side.
6. Keep the bar close to your body as you raise it.
7. Continue  lifting the bar until it is just below your chin. Pause for a count of one.
8. Return to the start position in a single smooth movement. Inhale as you do so.
9. Repeat.

This exercise can be performed using a straight bar attached to a low pulley or using dumbbells.

1. Attach a straight bar to the low pulley on the cable station.
2. Stand facing the station with your feet shoulder width apart either side of the pulley.
3. Grip the bar with an overhand grip, with your hands shoulder width apart and arms fully extended.
4. Keep your shoulders back.
5. Raise the bar straight up in one smooth movement, until it is just below your chin.
6. Hold for a count of one while squeezing your biceps and forearms.
7. Slowly lower to the start position and repeat.

1. Get into position by placing your hands flat on the floor, directly below your shoulders.
2. Extend your legs out behind you, with only your toes and balls of your feet touching the floor.
3. Hold your body up and keep your back straight by tightening your abdominal muscles.
4. Your neck and head should be bent slightly back.
5. Lower your chest towards the ground by bending your elbows until your chest is just above the ground or you feel a stretching of your chest and shoulders. Hold for a count of one.
6. Press upwards from your chest and shoulders, straightening your arms as you return to the starting position. Hold for a count of one.
7. Repeat.

1. Sit on an exercise mat with your legs fully extended and your upper body upright.
2. Grip a weight plate between both hands.
3. Hold the plate out in front of your abdominals keeping your arms bent slightly.
4. Cross your your ankles and raise them off the floor slightly.
5. Bend your knees towards you slightly.
6. Lean back about 15 degrees to balance your body. This is the start position.
7. In a smooth motion,turn your torso to the left and touch the plate on the floor. Make sure you exhale as you do this.
8. Return to the start position inhaling as you do so.
9. Repeat the same movement, this time to your right side, again exhaling as you do so.
10. Return to start position and repeat.

When performing this exercise, use smooth controlled movements. Jerking or using momentum to swing the weight can cause serious lower back injury.

1. Lie flat on an exercise mat on the floor keeping your lower back straight with no arching of your spine and with your knees bent and feet flat on the floor.
2. Place your hands lightly on the sides of your head.
3. Curl your torso upwards so your shoulders are slightly raised off the floor..
4. Raise your knees until your thighs are at a right angle to the floor and your calves are parallel to the floor. This is the start position.
5. Slowly move your legs in a pedaling action as if you are riding a bicycle.
6. As you do so, exhale and bring your opposing elbow close to each knee by crunching to one side. Left elbow to right knee. Right elbow to left knee.
7. After each crunch, return to the start position inhaling as you do so.
8. Without pausing, repeat the movement to the other side.
9. Repeat without pausing for the desired number of repetitions to each side.

Do not use your hands to pull your head and neck up during this exercise. Doing so may cause injury. Concentrate on a slow rhythmic cycle from side to side with perfect form for each repetition.

1. Place your hands flat on the floor, shoulder width apart.
2. Extend your torso and legs fully behind you with only your toes and balls of your feet touching the floor.
3. Your body should be in a straight line, with your weight supported on your hands and toes only.
4. Starting with either leg, flex your knee and hip at the same time to bring your knee up and under your hip. Your other leg should remain fully extended. This is the start position.
5. Using an explosive movement, reverse the position of your legs, by extending the bent leg back and simultaneously flexing the straight leg until it is in the startposition.
6. Continue alternating in this manner for the desire amount of time.