Long Lean Legs

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Stand straight with your feet hip width apart, arms fully extended and your hands by your sides.
2. Raise your left foot from the floor, extending your leg out in front of you.
3. As you do so, raise both arms out in front of you in a smooth arc for balance. This is the start position.
4. In a controlled movement, lower your body toward the floor by bending your right knee while pushing your hips back as if sitting down in a chair.
5. Continue this downward movement until your right thigh is parallel to the floor.
6. Hold for a count of one.
7. Return to the start position by pushing down through your right heel and straightening your leg. Lower your arms to the start position as you do so.
8. Repeat.

Beginner – this exercise can be completed by placing your hand on a chair, bench, parallel bar or other support to one next to you. Advanced – this exercise can be completed holding dumbbells down by your side, or a kettlebell to your chest to add resistance.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Stand with your feet shoulder-width apart with dumbbells above your shoulders.
2. Squat down keeping your back flat and your knees over your toes.
3. Push through your heels to return to standing while pressing the dumbbells overhead with arms fully extended.
4. Return to starting position and repeat.

1. Clean two kettlebells to your shoulders. Clean the kettlebells to your shoulders by extending through the legs and hips as you pull the kettlebells towards your shoulders. Rotate your wrists as you do so. This will be your starting position.
2. Begin to squat by flexing your hips and knees, lowering your hips between your legs. Maintain an upright, straight back as you descend as low as you can.
3. At the bottom, reverse direction and stand by extending your knees and hips and pushing down through your heels. As you do so, press both kettlebells overhead by extending your arms straight up, using the momentum from the squat to help drive the weights upward.
4. As you begin the next repetition, return the weights to the shoulders.

• With water bottles at your sides, stand with your feet slightly wider than shoulder-width apart and feet pointing slightly outward. Look straight ahead.
• Squat down until your upper legs are parallel with the floor by bending your knees, keep your back straight.
• With an explosive but controlled movement, push up through your heels and press the water bottles above your head as you return to standing position.
• Still standing, slowly lower the water bottles down to your chest and then down to your sides by extending your arms.
• Repeat.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Place a bench in front of you. Hold a pair of dumbbells and stand facing the bench. Brace your core and keep your gaze straight ahead.
2. Bring your right knee up and step up on to the bench. Placing all of the effort in your right leg, bring your body up into a standing position on the bench.
3. Slowly lower yourself to the starting position and switch legs.

1. Begin by standing with dumbbells in hand at your sides.
2. Place your feet hip-width apart.
3. Take a big step to the right with your right foot, keeping your arms straight.
4.  Land with your heel followed by the rest of your foot and flex the right knee so that you lower your hip and body until your knee and hip are at a 90 degree angle. Keep your left leg only slightly angled.
5. Return to the starting position by extending your right hip and knee. Once they are straight, bring your foot back in to a standing tall position.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Place a bench in front of you. Hold a pair of dumbbells and stand facing the bench. Brace your core and keep your gaze straight ahead.
2. Bring your right knee up and step up on to the bench. Placing all of the effort in your right leg, bring your body up into a standing position on the bench.
3. Slowly lower yourself to the starting position and switch legs.

1. Stand with your feet shoulder width apart while holding a light dumbbell to your chest. You should hold the dumbbell by one end between your hands, with the other end extending down your torso. This is the start position.
2. Squat down keeping your slightly arched and pushing your hips back.
3. Continue down until your thighs are parallel to the floor.
4. Hold for a count of one.
5. Return to the start position.
6. Repeat.

This exercise can also be performed with a kettlebell.

1. Stand up straight with a tight core and flat back.
2. Position your feet wider than shoulder-width. Your toes should be facing out diagonally.
3. Holding a dumbbell with both hands in front of you, look straight ahead and bend at the knees while driving your hips backward. Your knees should be following your toes in a diagonal line.
4. Complete this wide stance squat by having your thighs come parallel with the ground.
5. Pause and slowly return to the starting position without locking your knees.
6. Repeat.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Place an exercise step or something similar on the floor in front of you. It should be two or three inches high.
2. Holding a dumbbell in each hand, place your toes and the balls of your feet on the step. Make sure the arches of your feet are not on the step and your heels are on the floor.
3. Raise your heels as high as possible by pushing through the balls of your feet and toes while extending your ankles. Hold for a count of one.
4. Return to the starting position by bending your ankles until you feel a stretch in your calves.
5. Repeat.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Sitting on a calf raise machine, position your upper thighs under the top pad. The pad should be resting just above your knees.
2. Place the balls of your feet on the foot plate.
3. Keeping the balls of your feet in position, lower your heels as far as possible.
4. Slowly raise your heels as if standing on your toes. Continue as far as possible until you feel a stretch in your lower calves. Hold for a count of one.
5. Slowly lower your heels back to the starting position and repeat.

If the machine isn't equipped with foot plates, you can use barbell plates placed under the machine to increase your range of motion. Don't

1. Set up two weight plates on the ground next to each other. Position a loaded barbell across your trap muscles. Step on to the weight plates with the balls of your feet.
2. With a tight core and flat back, raise yourself up with your feet only. Pause at the top of the raise.
3. Slowly lower yourself down but do not touch the ground. Raise yourself back up.
4. Repeat.

1. Stand upright with a tight core and flat back. Extend arms to chest level in front of you while holding the weight.
2. Step forward with one leg. Front thigh should be parallel with the floor. Drop the back knee.
3. Rotate the torso towards the leg that stepped out while keeping arms extended. Push back up to the starting position.

This exercise can be performed with a dumbbell or a plate weight.

1. Keeping your back upright, take one step forward (around 1.5x a normal forward step).  
2. Lower your body into the lunge until the forward leg reaches a 90-degree angle bend.
3. As you lunge, strike forward with your opposite hand to a punch. Your back knee should only just hover from the floor.
4. Push upwards through the front leg and drive your body back to the starting position.

1. Standing with a braced core and flat back, bring your hands together at chest height. Position your feet to be at hip-width.
2. Beginning with the right foot, step backward and across your left foot. Simultaneously, bend the left knee and drop it towards the ground.
3. Stop when the front right knee is parallel with the ground. Push off the ground with your right foot and return to the starting position.

1. Stand up straight with a tight core and flat back.
2. Position your feet wider than shoulder-width. Your toes should be facing out diagonally.
3. Holding a dumbbell with both hands in front of you, look straight ahead and bend at the knees while driving your hips backward. Your knees should be following your toes in a diagonal line.
4. Complete this wide stance squat by having your thighs come parallel with the ground.
5. Pause and slowly return to the starting position without locking your knees.
6. Repeat.

1. Set a barbell on a rack at your shoulder height.
2. Step under the bar and rest the back of your shoulders against the bar. Do not put the bar on your neck.
3. Hold on to the bar using an overhand grip so that your palms are facing forward.
4. Lift the barbell off the rack by pushing up with your legs while straightening your torso.
5. Step away from the rack and position your legs in a wider than shoulder width position and with your toes slightly pointed out.
6. Keep your head up and look straight ahead at all times, as looking down will put you off balance.
7. Ensure your back is straight. This is the start position.
8. As you inhale, slowly lower the bar by bending your knees while keeping a straight posture with your head up.
9. Continue down until the angle between you upper legs and calves is slightly less than 90-degrees . As a guide, the front of your knees should be in line with your toes. Do not allow your knees to extend out beyond your toes.
10. Hold for a count of one.
11. As you exhale, raise the bar back to the start position, by pushing through your heels as you straighten your legs.
12. Pause for a count of one.
13. Repeat.

This is an exercise which carries some risk. If you have back issues, substitute this exercise for the dumbbell squat or leg press instead. Never slouch your back forward as this can cause back injury. This exercise is best performed inside a squat rack for safety purposes.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Position yourself on all fours with your torso on a swiss ball and hands and feet on the floor. Stretch your legs back and keep your hands under your shoulders.
2. Engage your abs and slowly walk your hands forward until your feet lift off the floor. Carry on walking out until your quads or knees rest on the ball in a plank position.
3. Slowly bend your knees in towards your chest allowing the ball to roll forward. Tuck your knees under your torso as your hips lift towards the ceiling.
4. Slowly straighten your legs and roll the ball out to the starting position.

1. Bring yourself to the ground and enter an elevated push-up position with your hands below your shoulders and your feet directly behind you. Carefully, insert one foot at a time into hanging TRX bands.
2. Maintaining a tight core, slowly lower yourself while keeping your balance. Once your upper arms are parallel with the floor, pause, and return to the starting position.
3. Bring your knees in towards your elbows, feeling the contraction in your abdominals. Slowly extend your feet back into the starting position. That is one repetition.

1. Lie face down on a padded surface. Place your hands beneath your shoulders and make sure your feet are extended straight behind you. Push yourself up into a classical Push-Up position. Keep your hips are slightly elevated. Tighten your core.
2. Keeping your gaze straight, push off the ground with your feet. Bending your knees, allow your feet to come up near your hands.
3. Immediately, push off the ground again with your feet, extending your legs straight behind you once again to the starting position.

1. Lie with your back flat on an exercise mat and your feet resting on top of a Swiss ball.
2. Use your feet to roll the ball away from you until your legs are fully extended and your ankles are on top of the ball. This is the start position.
3. Keep your shoulders flat on the ground and press down with your feet to raise your hips off the floor.
4. Bend your knees, so that the ball is pulled towards you and continue as far as is comfortable. Hold for a count of one.
5. Return to the starting position by extending your legs until they are straight.
6. Repeat.

1. Lie on the ground with a TRX Suspension Strap at your feet. Lift both your feet into the strap, making sure they are secure. Tighten your core and place your hands at your sides.
2. Drive your hips up while maintaining a straight line with your body. Curl your feet in, moving them towards your butt. Maintain balance with your hands on the ground.
3. Once your feet reach your butt, slowly extend your feet back to the starting position. Do not allow your hips to drop. Contract the core during the entire movement.