Lower Workout

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Sit on a padded surface with your legs out in front of you and the knees bent. Make sure your back is against a secured bench. Lay a barbell across your lap.
2. Focusing the tension in the glutes, raise your hips skyward, moving the bar up with you.
3. Pause when you feel the contraction in your glutes then slowly lower yourself to the starting position.

1. Select an appropriate weight for the plate you will be using. Place it next to where you will be laying.
2. Lay on flat on your back. Bend your knees, bringing your feet towards your hips. Bring the plate up and on to your pelvic area.
3. Tighten your core, flatten your back, and make sure your feet are firmly on the ground. Raise your hips up, creating a straight line from your head to your knees.
4. Slowly lower your hips and repeat the movement.

1. Lay down on an exercise mat with your feet flat on the floor and your knees pointing upwards bent at a 90 degree angle.
2. Place a resistance band across your hips and pin it down to the ground using your hands at either side.
3. Raise your hips upwards until a straight line is formed from your knees to your shoulders.
4. Hold this extended position for 1 second before slowly lowering your hips down to the starting position.

Do not perform if you suffer from hypertension.

1. Set up a  barbell on a rack  at just below shoulder level.
2. Step under the bar placing the back of your shoulders under it. Do not rest the bar on your neck.
3. Grip the the bar using an overhand grip with your elbows bent to90 degrees or slightly more. Less of an angle means your hands are too close together which can cause instability of balance.
4. Lift the barbell clear of the rack by  pushing with your legs, while straightening your torso.
5. Step away from the rack.
6. Step forward with your right leg and squat down through your hips. Keep your back straight  and be careful to maintain your balance. Inhale as you lower yourself.
7. Continue lowering your body until your left knee is nearly touching the floor.
8. Return to the start position b pushing through your heel,exhaling as you do so.
9. Complete all the repetitions for one leg before switching.

This exercise requires a great deal of balance. If you suffer from balance problems, it is best either avoid it, or just use your own body weight while holding on to a steady object. Never perform any exercise with a barbell on your back if you suffer from balance problems. For safety, this exercise is best performed inside a squat rack.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Place an appropriate amount of weight on a barbell in a squat rack. Position your hands in an overhand grip outside of shoulder-width on the barbell. Before beginning, make sure that your core is tight and your chest is up.
2. Push the barbell straight above your head, locking out your elbows. Once you feel stabilized, slowly bend the knees and drive back your hips.
3. Once your upper thighs come parallel with the ground, slowly push back up, returning to the starting position.

1. Place a firm grip on two appropriately weighted dumbbells. Before driving the dumbbells above your head, make sure that your core is tight and your chest is up.
2. Push the dumbbells straight above your head, locking out your elbows.
3. Once you feel stabilized, slowly bend the knees and drive your hips backwards, maintaining a tight, solid core as you do so.
4. Once your upper thighs become parallel with the ground, slowly push back up, returning to the starting position. Be sure to keep those dumbbells fixed overhead throughout the entire movement.

This, like all overhead weighted movements, should be performed in a controlled environment. Be sure to check the weight before attempting, if working with an adjustable dumbbell ensure all is locked tightly into place.

1. Place a firm grip on two water bottles. Before driving the water bottles above your head, make sure that your core is tight and your chest is up.
2. Push the water bottles straight above your head, locking out your elbows.
3. Once you feel stabilized, slowly bend the knees and drive your hips backwards, maintaining a tight, solid core as you do so.
4. Once your upper thighs become parallel with the ground, slowly push back up, returning to the starting position. Be sure to keep those water bottles fixed overhead throughout the entire movement.

This, like all overhead weighted movements, should be performed in a controlled environment. Be sure to check the weight before attempting.

1. Place an appropriate amount of weight on a barbell in a squat rack. Once ready, position yourself underneath the barbell. Keep your core tight and drive your hips forward to lift the barbell off the rack. Step away from the rack. Secure the barbell on your traps and make sure your core is braced before beginning.
2. Step out with the left foot, leaving the right foot behind. From this position, lower the back right knee towards the ground. Push up with your front left leg. Please note that you will not kick back up into a regular standing position until all repetitions have been completed.
3. Continue this up and down pattern. Switch sides and perform the same pattern with the right leg in front.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Stand straight with your feet hip width apart, arms fully extended and your hands by your sides.
2. Raise your left foot from the floor, extending your leg out in front of you.
3. As you do so, raise both arms out in front of you in a smooth arc for balance. This is the start position.
4. In a controlled movement, lower your body toward the floor by bending your right knee while pushing your hips back as if sitting down in a chair.
5. Continue this downward movement until your right thigh is parallel to the floor.
6. Hold for a count of one.
7. Return to the start position by pushing down through your right heel and straightening your leg. Lower your arms to the start position as you do so.
8. Repeat.

Beginner – this exercise can be completed by placing your hand on a chair, bench, parallel bar or other support to one next to you. Advanced – this exercise can be completed holding dumbbells down by your side, or a kettlebell to your chest to add resistance.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

• Standing sideways with your left side facing the weight stack of a pulley machine, attach an ankle cuff to the right ankle.
• Hold the machine for balance if you need to and slowly lift your right leg up to the right side.
• Pause and slowly return your right leg to starting position.
• Repeat the movement.

1. Lie on your right side on top of a yoga mat or other soft surface.
2. Brace your core and make sure your body is in a straight line. Keep your right hand on the ground and your left hand on your hip.
3. Slowly lift the left leg into the air, keeping it straight during the exercise.
4. Slowly lower your left leg. Complete the set then repeat with the other leg.

1. Place a resistance band around your knees
2. Lay sidewise on an exercise mat with your knees, together, pointing forwards and bent at a 90 degree angle.
3. Keeping your feet in a fixed position, lift your upper knee about 8 – 10 inches away from your lower knee.
4. Hold this extended position for 1 second before slowly lowering your knee back to its starting position.

Do not perform if you have had recent knee injuries.

• Attach an ankle strap around your right ankle. Stand tall in front of a cable machine with a flat back and tight core. Use the cable machine for balance, if necessary.
• While balancing on your left foot, move your right foot up and back. Pause at the top of the movement then slowly bring the foot down. Do not let your right foot touch the ground before repeating.
• Once finished, repeat on the other side.

1. Position yourself on all fours on a mat.
2. Position your hands underneath your shoulders and place your knees under your hips.
3. Keep your right knee bent at 90 degrees and flex the foot as you lift the knee until it is level with the hip.
4. Lower the knee without touching the floor and repeat the lift.
5. Once you’ve completed the reps on the right leg, switch legs.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. Secure a firm grip with both hands on an appropriately weighted dumbbell. Place your feet shoulder-width apart. Begin by moving the dumbbell up and over towards your right side.
2. Twist your body to bring the dumbbell down and to the left. Bend at the knees and drop your hips slightly. Make the motion of placing the dumbbell on the ground.
3. Repeat the movement, taking the dumbbell back up and overhead. Keep your arms straight throughout.

1. Stand with your feet no wider than shoulder width apart and hold the medicine ball with one hand at either side in front of your chest.
2. Rotate your body from the waist up to the left side and raise the medicine ball over your left shoulder, not quite fully extending your arms. Be sure to get extra reach by pointing your right toe.
3. Using a chopping motion, bring the ball diagonally across the front of your body so that the ball ends on the outer side of your right shin.
4. Bring the ball straight up the right side of your body and again move diagonally across your body once again to complete the motion.

1. Adjust the pulley lever to be above you. Stand next to a pulley machine with your left side. Grab the handle with both hands. Brace your core and separate your feet to outside of shoulder width.
2. Begin the movement by twisting with your obliques to pull the handle down and across your body.
3. Once the handle is on the right side of your body, pause and slowly return the handle to the starting position.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Place a bench in front of you. Hold a pair of dumbbells and stand facing the bench. Brace your core and keep your gaze straight ahead.
2. Bring your right knee up and step up on to the bench. Placing all of the effort in your right leg, bring your body up into a standing position on the bench.
3. Slowly lower yourself to the starting position and switch legs.

1. Begin by standing with dumbbells in hand at your sides.
2. Place your feet hip-width apart.
3. Take a big step to the right with your right foot, keeping your arms straight.
4.  Land with your heel followed by the rest of your foot and flex the right knee so that you lower your hip and body until your knee and hip are at a 90 degree angle. Keep your left leg only slightly angled.
5. Return to the starting position by extending your right hip and knee. Once they are straight, bring your foot back in to a standing tall position.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Place a bench in front of you. Hold a pair of dumbbells and stand facing the bench. Brace your core and keep your gaze straight ahead.
2. Bring your right knee up and step up on to the bench. Placing all of the effort in your right leg, bring your body up into a standing position on the bench.
3. Slowly lower yourself to the starting position and switch legs.

• With dumbbells at your sides, stand with your feet slightly wider than shoulder-width apart and fee pointing slightly outward. Look straight ahead.
• Squat down until your upper legs are parallel with the floor by bending your knees, keep your back straight.
• With an explosive but controlled movement, push up through your heels and press the dumbbells above your head as you return to standing position.
• Still standing, slowly lower the dumbbells down to your chest and then down to your sides by extending your arms.
• Repeat.

1. Shoulder-width stance. Tight core and flat back. Bend at the knees and hips. Lower yourself. Arms fully extended. Chest up and gaze straight ahead.
2. Bring knees in and shoulders up. Drive hips forward. Keep the bar close to your body. Forcefully exhale and perform a full extension of the knees and hips.
3. Use the momentum to bring elbows high. Rotate your elbows around and under the bar. Rack the bar across the front of your shoulders.
4. Press the barbell above your head. Lower the bar.

• With water bottles at your sides, stand with your feet slightly wider than shoulder-width apart and feet pointing slightly outward. Look straight ahead.
• Squat down until your upper legs are parallel with the floor by bending your knees, keep your back straight.
• With an explosive but controlled movement, push up through your heels and press the water bottles above your head as you return to standing position.
• Still standing, slowly lower the water bottles down to your chest and then down to your sides by extending your arms.
• Repeat.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. With your feet shoulder-width apart, stand with water bottles as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Position yourself under a barbell held by a squat rack. Keeping your elbows high, place your arms up and under the bar. The bar should be resting on the front of your shoulders. Core is tight. Back is flat.
2. Maintaining control, lift the bar up. Bend your knees forward and allow your hips to bend back as if sitting down. Pause when thighs are parallel with the floor.
3. Return to the starting position and repeat.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Stand upright with a tight core and flat back. Extend arms to chest level in front of you while holding the weight.
2. Step forward with one leg. Front thigh should be parallel with the floor. Drop the back knee.
3. Rotate the torso towards the leg that stepped out while keeping arms extended. Push back up to the starting position.

This exercise can be performed with a dumbbell or a plate weight.

1. Keeping your back upright, take one step forward (around 1.5x a normal forward step).  
2. Lower your body into the lunge until the forward leg reaches a 90-degree angle bend.
3. As you lunge, strike forward with your opposite hand to a punch. Your back knee should only just hover from the floor.
4. Push upwards through the front leg and drive your body back to the starting position.

1. Standing with a braced core and flat back, bring your hands together at chest height. Position your feet to be at hip-width.
2. Beginning with the right foot, step backward and across your left foot. Simultaneously, bend the left knee and drop it towards the ground.
3. Stop when the front right knee is parallel with the ground. Push off the ground with your right foot and return to the starting position.

1. Stand with your feet shoulder width apart while holding a light dumbbell to your chest. You should hold the dumbbell by one end between your hands, with the other end extending down your torso. This is the start position.
2. Squat down keeping your slightly arched and pushing your hips back.
3. Continue down until your thighs are parallel to the floor.
4. Hold for a count of one.
5. Return to the start position.
6. Repeat.

This exercise can also be performed with a kettlebell.

1. Stand up straight with a tight core and flat back.
2. Position your feet wider than shoulder-width. Your toes should be facing out diagonally.
3. Holding a dumbbell with both hands in front of you, look straight ahead and bend at the knees while driving your hips backward. Your knees should be following your toes in a diagonal line.
4. Complete this wide stance squat by having your thighs come parallel with the ground.
5. Pause and slowly return to the starting position without locking your knees.
6. Repeat.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Stand tall while holding a pair of dumbbells at your sides with an overhand grip. Your feet should be at shoulder-width. Tighten your core and carefully step forward with your left leg.
2. Bend the left knee forward while dropping the right knee towards the ground. Once your left thigh is parallel with the ground, pause and contract the hamstrings.
3. Keep your upper arms at your sides as you curl the dumbbell up and towards your shoulder, and rotate them into a hammer position. Slowly lower the dumbbells then kick off the floor with your left foot to return to the starting position. Repeat on the right side. Continue alternating.

1. Standing tall with a tight core and flat back, hold a barbell or a pair of dumbbells in front of you. Hands should be slightly wider than shoulder-width.
2. Maintaining a tight core and flat back, bend your knees slightly and push your hips back. Keep your arms extended and the weight close to the body. Once you feel the contraction in the back of your legs, slowly return to the starting position.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Place a barbell on the floor and stand facing it with your feet shoulder width apart, toes pointing forward and your knees slightly bent. This is the start position.
2. As you exhale, bend at the waist keeping your back straight and knees slightly bent until you feel tension in your hamstrings.
3. Grasp the barbell with an overhand grip. Your arms should be fully extended with your hands spaced shoulder width apart.
4. Lift the barbell by extending your hips and waist in a smooth action until you have returned to the upright position, inhaling as you do so.
5. Pause for a count of 1-2.
6. Return the barbell to the floor or just above it by repeating step two.
7. Repeat.

This exercise should be avoided by those who suffer from lower back problems. To avoid injury, keep your back and torso straight at all times throughout this movement. This exercise can be performed using dumbbells or a straight bar attached to the low pulley of a cable station.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. Place an exercise step or something similar on the floor in front of you. It should be two or three inches high.
2. Holding a dumbbell in each hand, place your toes and the balls of your feet on the step. Make sure the arches of your feet are not on the step and your heels are on the floor.
3. Raise your heels as high as possible by pushing through the balls of your feet and toes while extending your ankles. Hold for a count of one.
4. Return to the starting position by bending your ankles until you feel a stretch in your calves.
5. Repeat.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Sitting on a calf raise machine, position your upper thighs under the top pad. The pad should be resting just above your knees.
2. Place the balls of your feet on the foot plate.
3. Keeping the balls of your feet in position, lower your heels as far as possible.
4. Slowly raise your heels as if standing on your toes. Continue as far as possible until you feel a stretch in your lower calves. Hold for a count of one.
5. Slowly lower your heels back to the starting position and repeat.

If the machine isn't equipped with foot plates, you can use barbell plates placed under the machine to increase your range of motion. Don't

1. Set up two weight plates on the ground next to each other. Position a loaded barbell across your trap muscles. Step on to the weight plates with the balls of your feet.
2. With a tight core and flat back, raise yourself up with your feet only. Pause at the top of the raise.
3. Slowly lower yourself down but do not touch the ground. Raise yourself back up.
4. Repeat.

1. Stand up straight with a tight core and flat back.
2. Position your feet wider than shoulder-width. Your toes should be facing out diagonally.
3. Holding a dumbbell with both hands in front of you, look straight ahead and bend at the knees while driving your hips backward. Your knees should be following your toes in a diagonal line.
4. Complete this wide stance squat by having your thighs come parallel with the ground.
5. Pause and slowly return to the starting position without locking your knees.
6. Repeat.

1. Set a barbell on a rack at your shoulder height.
2. Step under the bar and rest the back of your shoulders against the bar. Do not put the bar on your neck.
3. Hold on to the bar using an overhand grip so that your palms are facing forward.
4. Lift the barbell off the rack by pushing up with your legs while straightening your torso.
5. Step away from the rack and position your legs in a wider than shoulder width position and with your toes slightly pointed out.
6. Keep your head up and look straight ahead at all times, as looking down will put you off balance.
7. Ensure your back is straight. This is the start position.
8. As you inhale, slowly lower the bar by bending your knees while keeping a straight posture with your head up.
9. Continue down until the angle between you upper legs and calves is slightly less than 90-degrees . As a guide, the front of your knees should be in line with your toes. Do not allow your knees to extend out beyond your toes.
10. Hold for a count of one.
11. As you exhale, raise the bar back to the start position, by pushing through your heels as you straighten your legs.
12. Pause for a count of one.
13. Repeat.

This is an exercise which carries some risk. If you have back issues, substitute this exercise for the dumbbell squat or leg press instead. Never slouch your back forward as this can cause back injury. This exercise is best performed inside a squat rack for safety purposes.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Place a loaded barbell in front of you. Position your feet wider than shoulder width. Have your toes pointing out away from the body. Tighten the core and straighten the lower back.
2. Bend at the knees, lowering your hips down above parallel. Take hold of the barbell with an overhand grip at shoulder width. Focusing the tension in your hamstrings, pull the barbell up. Be sure to keep the barbell close to your body.
3. Drive your hips forward at the top of the movement. Slowly reverse the movement and lower the barbell while maintaining a flat back.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Set a barbell on a rack at your shoulder height.
2. Step under the bar and rest the back of your shoulders against the bar. Do not put the bar on your neck.
3. Hold on to the bar using an overhand grip so that your palms are facing forward.
4. Lift the barbell off the rack by pushing up with your legs while straightening your torso.
5. Step away from the rack and position your legs in a wider than shoulder width position and with your toes slightly pointed out.
6. Keep your head up and look straight ahead at all times, as looking down will put you off balance.
7. Ensure your back is straight. This is the start position.
8. As you inhale, slowly lower the bar by bending your knees while keeping a straight posture with your head up.
9. Continue down until the angle between you upper legs and calves is slightly less than 90-degrees . As a guide, the front of your knees should be in line with your toes. Do not allow your knees to extend out beyond your toes.
10. Hold for a count of one.
11. As you exhale, raise the bar back to the start position, by pushing through your heels as you straighten your legs.
12. Pause for a count of one.
13. Repeat.

This is an exercise which carries some risk. If you have back issues, substitute this exercise for the dumbbell squat or leg press instead. Never slouch your back forward as this can cause back injury. This exercise is best performed inside a squat rack for safety purposes.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Stand up straight with a tight core and flat back.
2. Position your feet wider than shoulder-width. Your toes should be facing out diagonally.
3. Holding a dumbbell with both hands in front of you, look straight ahead and bend at the knees while driving your hips backward. Your knees should be following your toes in a diagonal line.
4. Complete this wide stance squat by having your thighs come parallel with the ground.
5. Pause and slowly return to the starting position without locking your knees.
6. Repeat.