Weighted Barbell Exercises

1. Stand straight holding a barbell with an underhand grip, your hands shoulder width apart and your arms fully extended towards the floor.
2. Keep your elbows close to your sides.Your palms should be facing away from you. This is the start position.
3. Keeping your upper arms stationary, curl the barbell forward and up in a smooth arcing motion while exhaling. Only your forearms should move.
4. Continue upwards until  the bar is at shoulder level with your biceps fully contracted. Hold for a count of one while squeezing your biceps.
5. Inhale as you return to the starting position.
6. Repeat.

This exercise can be performed using a cable station, with a straight bar attachment connected to the lower pulley.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. Set up a  barbell on a rack  at just below shoulder level.
2. Step under the bar placing the back of your shoulders under it. Do not rest the bar on your neck.
3. Grip the the bar using an overhand grip with your elbows bent to90 degrees or slightly more. Less of an angle means your hands are too close together which can cause instability of balance.
4. Lift the barbell clear of the rack by  pushing with your legs, while straightening your torso.
5. Step away from the rack.
6. Step forward with your right leg and squat down through your hips. Keep your back straight  and be careful to maintain your balance. Inhale as you lower yourself.
7. Continue lowering your body until your left knee is nearly touching the floor.
8. Return to the start position b pushing through your heel,exhaling as you do so.
9. Complete all the repetitions for one leg before switching.

This exercise requires a great deal of balance. If you suffer from balance problems, it is best either avoid it, or just use your own body weight while holding on to a steady object. Never perform any exercise with a barbell on your back if you suffer from balance problems. For safety, this exercise is best performed inside a squat rack.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. Set up a barbell on the floor and stand facing it with your legs slightly wider than shoulder width apart and your knees slightly bent.
2. Bend forward at your waist and grip the barbell with an overhand grip.
3. Keep your back straight and nearly parallel to the floor.
4. Keep your head and neck straight. This is the start position.
5. Without moving your torso, exhale and lift the barbell up towards you.
6. Keep your elbows close in to your bodyand use your forearms to support the weight.
7. At the top of the movement, hold for a count of one and sqyeeze your back muscles.
8. Return to the start position inhaling as you do so.

If you suffer from lower back problems, this exercise is not recommended. Always keep your back straight throughout this exercise. This exercise can be performed using an underhand grip to engage the triceps also.

1. Connect a V-bar attachment to the low pulley on a cable station or cable rowing machine.
2.  Sit down at the station and place your feet on the foot pads or crossbar provided, while keeping your knees slightly bent.
3. Lean forward, keeping your back straight and grip the V-bar handles with both hands.
4. Keeping your arms fully extended pull back until your torso is at a 90-degree angle from your legs.
5. Your back should be slightly arched, with your chest should be pushed out. This is the start position.
6. Keeping your torso stationary, pull the handles back towards you while squeezing your back muscles.
7. Keep your arms close to your sides until your hands reach your abdomen. Exhale as you perform this movement.
8. Hold for a count of one.
9. Inhale as you return to the start position in a smooth movement.
10. Repeat.

Do not swing or rock back and forth as you perform this exercise. Doing so can cause lower back injury. <strong></strong> You can perform this exercise using a straight bar instead of a V-Bar. You can use an underhand or overhand grip.

1. Stand tall with a tight core and flat back. Hold a pair of dumbbells at your side with an overhand grip. Bend slightly at the knees as you push your hips back. Keep your chest and head up. Upper body should be almost parallel with the floor.
2. With your elbows at a 60-degree angle, bring the dumbbells up. Pause when your upper arm is parallel with the floor. Contract the muscle then slowly return the dumbbells to the starting point.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bend slightly at the knees and forward at the hips. Maintain a braced core and flat back throughout.
3. Leading with your elbows, pull the handles of the resistance band back, bringing your shoulder blades closer together. Hold this contraction and slowly release to the starting position.

1. Standing tall with a tight core and flat back, hold a barbell or a pair of dumbbells in front of you. Hands should be slightly wider than shoulder-width.
2. Maintaining a tight core and flat back, bend your knees slightly and push your hips back. Keep your arms extended and the weight close to the body. Once you feel the contraction in the back of your legs, slowly return to the starting position.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Place a barbell on the floor and stand facing it with your feet shoulder width apart, toes pointing forward and your knees slightly bent. This is the start position.
2. As you exhale, bend at the waist keeping your back straight and knees slightly bent until you feel tension in your hamstrings.
3. Grasp the barbell with an overhand grip. Your arms should be fully extended with your hands spaced shoulder width apart.
4. Lift the barbell by extending your hips and waist in a smooth action until you have returned to the upright position, inhaling as you do so.
5. Pause for a count of 1-2.
6. Return the barbell to the floor or just above it by repeating step two.
7. Repeat.

This exercise should be avoided by those who suffer from lower back problems. To avoid injury, keep your back and torso straight at all times throughout this movement. This exercise can be performed using dumbbells or a straight bar attached to the low pulley of a cable station.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. Sitting on a bench, hold a barbell using and underhand grip with your hands shoulder width apart.
2. Place your feet flat on the floor, at a distance that is slightly wider than shoulder width apart.
3. Leaning forward, rest the back of your forearms on your upper thighs and your palms facing up. The back of your wrists should lie on top of your knees. This is the start position.
4. Lower the bar past your knees as far as possible by bending your wrists only. Keep your forearms flat on your thighs. Hold for a count of one.
5. Now curl the bar upwards, continuing past the start position as far as possible using your wrists only.
6. Hold for a count of one while squeezing your forearm.
7. Repeat the entire movement for the desired number of repetitions.

This exercise can be performed using one or two dumbbells or an EZ bar.