Day 1 Legs /Shoulders

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Stand straight with your feet hip width apart, arms fully extended and your hands by your sides.
2. Raise your left foot from the floor, extending your leg out in front of you.
3. As you do so, raise both arms out in front of you in a smooth arc for balance. This is the start position.
4. In a controlled movement, lower your body toward the floor by bending your right knee while pushing your hips back as if sitting down in a chair.
5. Continue this downward movement until your right thigh is parallel to the floor.
6. Hold for a count of one.
7. Return to the start position by pushing down through your right heel and straightening your leg. Lower your arms to the start position as you do so.
8. Repeat.

Beginner – this exercise can be completed by placing your hand on a chair, bench, parallel bar or other support to one next to you. Advanced – this exercise can be completed holding dumbbells down by your side, or a kettlebell to your chest to add resistance.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Hold a kettlebell by the handle in one hand using a neutral grip.
2. Stand on the leg that is on the same side that you are holding the kettlebell.This is the start position.
3. Bending that knee slightly, bend at the hip, and extend your free leg behind you for balance.
4. Continue lowering the kettlebell until your torso is parallel to the ground.
5. Return to the upright position in a smooth movement.
6. Repeat.

1. Stand tall with a tight core while holding a pair of dumbbells. Keeping your chest up and your gaze straight ahead, shift all of your bodyweight to your left foot. Bend the right knee, allowing the right foot to lift off the ground.
2. Maintaining a flat back, tilt your upper body forward. Do not allow the dumbbells to pull you down. Control your descent. Simultaneously, allow the right foot to counterbalance the shift in weight.
3. Feel the contraction in your hamstrings and pause once your upper body is parallel with the ground. Slowly return to the starting position.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Place a bench in front of you. Hold a pair of dumbbells and stand facing the bench. Brace your core and keep your gaze straight ahead.
2. Bring your right knee up and step up on to the bench. Placing all of the effort in your right leg, bring your body up into a standing position on the bench.
3. Slowly lower yourself to the starting position and switch legs.

1. Begin by standing with dumbbells in hand at your sides.
2. Place your feet hip-width apart.
3. Take a big step to the right with your right foot, keeping your arms straight.
4.  Land with your heel followed by the rest of your foot and flex the right knee so that you lower your hip and body until your knee and hip are at a 90 degree angle. Keep your left leg only slightly angled.
5. Return to the starting position by extending your right hip and knee. Once they are straight, bring your foot back in to a standing tall position.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Place a bench in front of you. Hold a pair of dumbbells and stand facing the bench. Brace your core and keep your gaze straight ahead.
2. Bring your right knee up and step up on to the bench. Placing all of the effort in your right leg, bring your body up into a standing position on the bench.
3. Slowly lower yourself to the starting position and switch legs.

1. Lie face down on a hyper extension bench with your upper thighs and lower hips on the support pad. You must be able to bend at the waist freely.
2. Lock your ankles under the footpads.
3. Start with your body in a straight line head to toe.
4. Place your arms across your chest, behind or at the side of your head.
5. Slowly bend forward by relacing your, back and abdominal muscles.
6. Continue as far as possible without rounding your back or raising your thighs from the support pad. You should feel a slight stretch in your hamstrings.Hold for a count of one.
7. Return to the start position by contracting your back and abdominal muscles until your body is once again straight. Do not arch your back up at the end of the movement. Pause and repeat.

As your strength and flexibility increase, you can hold a weight plate against your chest for extra resistance.

1. Lie face down on a mat, with your arms fully extended above your head and your legs fully extended behind you.
2. Lift your chest, arms and legs off the floor by arching your back. Only the tops of your quads and your lower abdomen should be in contact with the floor.
3. Hold for a count of 2 while squeezing your abdominals and obliques.
4. Return to the starting position for a count of one, then repeat.

This exercise can be done using one arm and it's opposite leg at a time. For example, right arm and left leg raised while your left arm and right leg remain on the floor. This method of execution allows you to use the free hand to push down on the floor to lift your chest higher from the ground.

1. Lie with your back flat on an exercise mat and your feet resting on top of a Swiss ball.
2. Use your feet to roll the ball away from you until your legs are fully extended and your ankles are on top of the ball. This is the start position.
3. Keep your shoulders flat on the ground and press down with your feet to raise your hips off the floor.
4. Bend your knees, so that the ball is pulled towards you and continue as far as is comfortable. Hold for a count of one.
5. Return to the starting position by extending your legs until they are straight.
6. Repeat.

1. Lie on the ground with a TRX Suspension Strap at your feet. Lift both your feet into the strap, making sure they are secure. Tighten your core and place your hands at your sides.
2. Drive your hips up while maintaining a straight line with your body. Curl your feet in, moving them towards your butt. Maintain balance with your hands on the ground.
3. Once your feet reach your butt, slowly extend your feet back to the starting position. Do not allow your hips to drop. Contract the core during the entire movement.

1. Sitting on a calf raise machine, position your upper thighs under the top pad. The pad should be resting just above your knees.
2. Place the balls of your feet on the foot plate.
3. Keeping the balls of your feet in position, lower your heels as far as possible.
4. Slowly raise your heels as if standing on your toes. Continue as far as possible until you feel a stretch in your lower calves. Hold for a count of one.
5. Slowly lower your heels back to the starting position and repeat.

If the machine isn't equipped with foot plates, you can use barbell plates placed under the machine to increase your range of motion. Don't

1. Adjust the seated leg curl machine to position the footpad just above your heels.
2. Sit upright and engage your abs as you position your legs in front of you.
3. Begin to curly your legs back slowly towards you and flex your calf muscles as you do so.
4. Return to the starting position by extending the legs in front of you again.

Tip: Try not to swing the weight or execute the movement too quickly.

1. Lie face down on a leg curl machine and lock your heels under the foot pad. Make sure your legs are fully extended and the foot pads are resting on the back of your ankles.
2. If the machine is equipped with handles, grip them. If not, grip the front of the pad you are lying on.
3. Remaining flat on the bench, with no arching of your spine, curl your legs up in a smooth arcing motion by bending your knees until your hamstrings are fully contracted. Hold for a count of one.
4. Slowly lower your legs to the starting position in a smooth arcing motion.
5. Repeat

Don't use so much weight for this exercise that you need to swing or jerk the weight up. Doing so can cause injury to your lower back and / or hamstrings. Start with a lower weight until your strength increases.

1. Begin with a light weight and stand facing the machine. Position one leg for the lift by hooking it under the weight pad.
2. Make sure the pads are in a comfortable position around your ankle in order to involve the heel in the movement. Don’t position the pads too high on the calf.
3. Grab hold of the support handles.
4. Flex your knee and lift the pad upwards as far as you can towards your buttocks as you exhale.
5. Lower the leg to the starting position.

1. Lie on the ground with a TRX Suspension Strap at your feet. Lift both your feet into the strap, making sure they are secure. Tighten your core and place your hands at your sides.
2. Drive your hips up while maintaining a straight line with your body. Curl your feet in, moving them towards your butt. Maintain balance with your hands on the ground.
3. Once your feet reach your butt, slowly extend your feet back to the starting position. Do not allow your hips to drop. Contract the core during the entire movement.

1. Lie face down on a leg curl machine and lock your heels under the foot pad. Make sure your legs are fully extended and the foot pads are resting on the back of your ankles.
2. If the machine is equipped with handles, grip them. If not, grip the front of the pad you are lying on.
3. Remaining flat on the bench, with no arching of your spine, curl your legs up in a smooth arcing motion by bending your knees until your hamstrings are fully contracted. Hold for a count of one.
4. Slowly lower your legs to the starting position in a smooth arcing motion.
5. Repeat

Don't use so much weight for this exercise that you need to swing or jerk the weight up. Doing so can cause injury to your lower back and / or hamstrings. Start with a lower weight until your strength increases.

1. Adjust the seated leg curl machine to position the footpad just above your heels.
2. Sit upright and engage your abs as you position your legs in front of you.
3. Begin to curly your legs back slowly towards you and flex your calf muscles as you do so.
4. Return to the starting position by extending the legs in front of you again.

Tip: Try not to swing the weight or execute the movement too quickly.

1. Stand with your back straight, feet shoulder width apart, while holding a dumbbell in each hand with a neutral grip.
2. Hold your arms fully extended by your side, with your palms facing in to your body.
3. Keep your elbows close to your sides. This is the start position.
4. Keeping your arms fully extended and your torso stationary, lift the dumbbells out to your sides and up until they are at shoulder level. Exhale as you do so.
5. Hold for a count of one while squeezing your shoulder muscles.
6.  Return to the start position in a smooth controlled movement inhaling as you do so.
7. Repeat.

<strong> </strong>

1. Sit on a bench, holding a dumbbell in each hand. Your hands should be at your sides.
2. Maintain a flat back and tight core. Look straight ahead during the movement.
3. Be sure to maintain a slight bend in your elbows at all times.
4. Extend your arms out to the side and guide the weight up. Your arms should come to parallel with the floor.
5. Pause, slowly lower the weight back to the starting position. Repeat.

1. Place your left foot onto the middle of a resistance band. Step forward with the right. Tighten your abdominals and avoid arching your back.
2. Maintaining a slight bend in the elbows at all times, slowly raise your arms up from the sides of your body. Be sure to favor the front as you lift.
3. Once your arms reach parallel with the floor, pause, feel the contraction, and slowly lower back down.

1. Sit on a military press bench or bench that has a back support, holding a dumbbell in each hand with an overhand grip.
2. Place the dumbbells on top of your thighs with your palms facing down.
3. Raise the dumbbells to your shoulders.
4. Rotate your wrists so that the palms of your hands are facing away from you. This is the start position.
5. As you exhale,  push the dumbbells up and over your head by extending your arms until the dumbbells touch at the top of the movement.
6. Pause for a count of one.
7. Slowly return to the start position inhaling as you do so.
8. Repeat.

This exercise can be performed standing or sitting on  flat bench. For people with lower back problems, the version described is better.

1. Holding a water bottle in each hand, stand straight, with your feet shoulder width apart.
2. Raise the water bottles to head height by rotating your arms forward and up.
3. Your triceps should be parallel to the floor and your elbows bent at 90 degrees. This is the start position.
4. Keeping your back straight and using only your arms, extend through your shoulders and elbows to drive the water bottles straight up, exhaling as you do so.
5. As your arms reach the fully extended position, bring them in towards each other until the water bottles touch lightly together.
6. Hold for a count of one, while squeezing your shoulder muscles.
7. In a controlled movement, return to the starting position, inhaling as you do so.
8. Repeat.

1. Place your left foot onto the middle of a resistance band. Step forward with the right. Tighten your abdominals and avoid arching your back.
2. Press the handles of the resistance band up and stop once your upper arms are parallel with the ground, making a scarecrow formation. The band should be behind your arms.
3. Slowly press the resistance band overhead. Do not lock out the elbows. Lower to the starting position and begin again.

1. Stand straight holding a dumbbell in each hand with an overhand grip.
2. Hold the dumbbells in in front of your thighs with your palms of the facing your thighs. Keep your arms fully extended. This is the start position.
3. Raise the left dumbbell out and upwards, while keeping a slight bend in your elbow. Your palms must always face down for this exercise.
4. Continue raising the dumbbell until you arm is a little above parallel to the floor. Exhale as you are raising the dumbbell.
5. Pause for a count of one.
6. Inhale and slowly lower the dumbbell to the start position.
7. As you lower the left dumbbell, begin to lift the right dumbbell, duplicating the movement.
8. When both dumbbells have been raised and lowered in a cycle, that is one repetition.
9. Repeat.

This exercise can be performed using both arms at the same time and also by substituting a barbell for the two dumbbells.

1. Holding the handle of a resistance band in each hand, step on the middle of the band with both feet. Stand up straight with a tight core and flat back.
2. Begin by lifting your hands straight up in front of you with an overhand grip. Be sure to keep a slight bend in the elbows at all times.
3. Pause at the top to feel the contraction then slowly lower the bands to the starting position.

1. Place a light-weighted barbell in front of you at your shins.
2. Squat down into position, driving your hips back. Keep your chest and head up. Place your hands in an overhand grip on the barbell.
3. Stand up with a tight core and flat back. Keeping a slight bend in the elbows, raise the bar up and in front of you. Pause when your arms are parallel with the ground.
4. Slowly lower the barbell to your hip. Repeat the movement.

1. Sit on a bench/chair with your back straight and your arms straight along your sides with the dumbbells help in an overhand grip.
2. Bring both dumbbells up in front of your body, keeping only a slight bend at your elbow.
3. Raise the dumbbells until they are both at about eye level and be sure to brace your core and keep your back supported by the bench/chair.  
4. Lower the dumbbells back down to your sides, and prepare for that next rep!

1. Stand tall with a tight core and flat back. Hold a weight plate, dumbbell or kettlebell with both hands in front of your hips. Be sure to use an overhand grip. You can also use a resistance band secured under your feet. Your feet should be shoulder-width apart.
2. With a slight bend in the elbows, raise the weight plate up and in front of you. Pause and squeeze the shoulders when you reach chest level.
3. Slowly lower the plate to the starting position, immediately moving into the next repetition.

1. Begin by sitting on a flat bench. Hold the dumbbell at your side with an overhand grip. Tighten your core and flatten your back.
2. Bring the dumbbells up to shoulder height so that your palm are facing you. Push the dumbbells overhead. Rotate them as you do so.
3. At the height of the movement, your palms should be facing away from you. Pause, contract and slowly return to the starting point through the same rotation.

1. Sit on a military press bench or bench that has a back support, holding a dumbbell in each hand with an overhand grip.
2. Place the dumbbells on top of your thighs with your palms facing down.
3. Raise the dumbbells to your shoulders.
4. Rotate your wrists so that the palms of your hands are facing away from you. This is the start position.
5. As you exhale,  push the dumbbells up and over your head by extending your arms until the dumbbells touch at the top of the movement.
6. Pause for a count of one.
7. Slowly return to the start position inhaling as you do so.
8. Repeat.

This exercise can be performed standing or sitting on  flat bench. For people with lower back problems, the version described is better.

1. Holding a water bottle in each hand, stand straight, with your feet shoulder width apart.
2. Raise the water bottles to head height by rotating your arms forward and up.
3. Your triceps should be parallel to the floor and your elbows bent at 90 degrees. This is the start position.
4. Keeping your back straight and using only your arms, extend through your shoulders and elbows to drive the water bottles straight up, exhaling as you do so.
5. As your arms reach the fully extended position, bring them in towards each other until the water bottles touch lightly together.
6. Hold for a count of one, while squeezing your shoulder muscles.
7. In a controlled movement, return to the starting position, inhaling as you do so.
8. Repeat.

1. Place your left foot onto the middle of a resistance band. Step forward with the right. Tighten your abdominals and avoid arching your back.
2. Press the handles of the resistance band up and stop once your upper arms are parallel with the ground, making a scarecrow formation. The band should be behind your arms.
3. Slowly press the resistance band overhead. Do not lock out the elbows. Lower to the starting position and begin again.

1. Place a light-weighted barbell in front of you at your shins.
2. Squat down into position, driving your hips back. Keep your chest and head up. Place your hands in an overhand grip on the barbell.
3. Stand up with a tight core and flat back. Keeping a slight bend in the elbows, raise the bar up and in front of you. Pause when your arms are parallel with the ground.
4. Slowly lower the barbell to your hip. Repeat the movement.

1. Holding a pair of dumbbells with an overhand grip, stand tall with your chest up and core braced.
2. Begin by lifting the dumbbells in front of you. Keep the abdominals contracted as you raise the dumbbells. Feel the contraction in the shoulder muscles.
3. Once the dumbbells reach shoulder height, pause and slowly lower the dumbbells to the starting position.

1. Stand straight holding a water bottle in each hand with an overhand grip.
2. Hold the water bottles in front of your thighs with your palms of the facing your thighs. Keep your arms fully extended. This is the start position.
3. Raise the left water bottle out and upwards, while keeping a slight bend in your elbow. Your palms must always face down for this exercise.
4. Continue raising the water bottle until your arm is a little above parallel to the floor. Exhale as you are raising the water bottle.
5. Pause for a count of one.
6. Inhale and slowly lower the water bottle to the start position.
7. As you lower the left water bottle, begin to lift the right water bottle, duplicating the movement.
8. When both water bottles have been raised and lowered in a cycle, that is one repetition.
9. Repeat.

1. Holding the handle of a resistance band in each hand, step on the middle of the band with both feet. Stand up straight with a tight core and flat back.
2. Begin by lifting your hands straight up in front of you with an overhand grip. Be sure to keep a slight bend in the elbows at all times.
3. Pause at the top to feel the contraction then slowly lower the bands to the starting position.

1. Stand straight with your feet shoulder width apart and hands by your sides. This is the start position.
2. In one smooth motion, squat down and place your hands palms down on the floor in front of your feet.
3. Lean forward, so your weight is on your hands, at the same time jumping your legs out behind you until they are fully extended. Your body should form a straight line with your weight supported on your toes and the balls of your feet and your arms fully extended. (In a push up position)
4. Jump your feet out by spreading your legs, so that they are wider than hip width apart, then immediately jump them back together.
5. Complete 1 full push up.
6. Jump your feet forward to just behind your hands.
7. Use an explosive motion to push through your heels and return to the start postion.
8. Repeat.

1. Lie face down on a padded surface. Place your hands beneath your shoulders and make sure your feet are extended straight behind you. Push yourself up into a classical Push-Up position. Keep your hips are slightly elevated. Tighten your core.
2. Keeping your gaze straight, push off the ground with your feet. Bending your knees, allow your feet to come up near your hands.
3. Immediately, push off the ground again with your feet, extending your legs straight behind you once again to the starting position.