Leg Day

1. Stand straight with your feet shoulder width apart and hands by your sides. This is the start position.
2. In one smooth motion, squat down and place your hands palms down on the floor in front of your feet.
3. Lean forward, so your weight is on your hands, at the same time jumping your legs out behind you until they are fully extended. Your body should form a straight line with your weight supported on your toes and the balls of your feet and your arms fully extended. (In a push up position)
4. Jump your feet out by spreading your legs, so that they are wider than hip width apart, then immediately jump them back together.
5. Complete 1 full push up.
6. Jump your feet forward to just behind your hands.
7. Use an explosive motion to push through your heels and return to the start postion.
8. Repeat.

1. Lie face down on a padded surface. Place your hands beneath your shoulders and make sure your feet are extended straight behind you. Push yourself up into a classical Push-Up position. Keep your hips are slightly elevated. Tighten your core.
2. Keeping your gaze straight, push off the ground with your feet. Bending your knees, allow your feet to come up near your hands.
3. Immediately, push off the ground again with your feet, extending your legs straight behind you once again to the starting position.

1. Begin by placing a loaded barbell behind you. Place two 25 lb plates under the back of your feet. Tighten your core and straighten your lower back.
2. Slowly squat down, getting a good grip on the barbell behind you. Check to make sure your posture is still perfect and balanced.
3. Stand up while holding the barbell behind. Use your heels to drive yourself back up. Do not straighten your knees at the top.
4. Slowly lower yourself back down, driving your hips behind you. Repeat the movement.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Stand straight with your feet hip width apart, arms fully extended and your hands by your sides.
2. Raise your left foot from the floor, extending your leg out in front of you.
3. As you do so, raise both arms out in front of you in a smooth arc for balance. This is the start position.
4. In a controlled movement, lower your body toward the floor by bending your right knee while pushing your hips back as if sitting down in a chair.
5. Continue this downward movement until your right thigh is parallel to the floor.
6. Hold for a count of one.
7. Return to the start position by pushing down through your right heel and straightening your leg. Lower your arms to the start position as you do so.
8. Repeat.

Beginner – this exercise can be completed by placing your hand on a chair, bench, parallel bar or other support to one next to you. Advanced – this exercise can be completed holding dumbbells down by your side, or a kettlebell to your chest to add resistance.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

• Standing sideways with your left side facing the weight stack of a pulley machine, attach an ankle cuff to the right ankle.
• Hold the machine for balance if you need to and slowly lift your right leg up to the right side.
• Pause and slowly return your right leg to starting position.
• Repeat the movement.

1. Lie on your right side on top of a yoga mat or other soft surface.
2. Brace your core and make sure your body is in a straight line. Keep your right hand on the ground and your left hand on your hip.
3. Slowly lift the left leg into the air, keeping it straight during the exercise.
4. Slowly lower your left leg. Complete the set then repeat with the other leg.

1. Place a resistance band around your knees
2. Lay sidewise on an exercise mat with your knees, together, pointing forwards and bent at a 90 degree angle.
3. Keeping your feet in a fixed position, lift your upper knee about 8 – 10 inches away from your lower knee.
4. Hold this extended position for 1 second before slowly lowering your knee back to its starting position.

Do not perform if you have had recent knee injuries.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. Position yourself on all fours on a mat with your palms flat and shoulder-width apart. Place your knees hip-width apart and bend them at a 90 degree angle.
2. Try to relax your core so that your back and abs are in a natural position.
3. Maintain this posture as you raise your right knee and bring it as close to your chest as you can.
4. Now raise your right thigh out to the side, keeping the hips still.
5. Kick your raised leg straight back slowly until it is in line with your torso.
6. Reverse the movement to return to the starting position.

1. Lie on your right side on top of a yoga mat or other soft surface.
2. Brace your core and make sure your body is in a straight line. Keep your right hand on the ground and your left hand on your hip.
3. Slowly lift the left leg into the air, keeping it straight during the exercise.
4. Slowly lower your left leg. Complete the set then repeat with the other leg.

1. Stand in front of a sturdy bench, box or other flat non slip surface that’s high enough that you must use that you have to use a lot of effort in order to jump up on top of it.
2. Stand with your feet shoulder width apart.
3. Bend your knees as if crouching or performing a squat.
4. In an explosive movement, push through your feet to jump up onto the landing area.
5. Make a soft landing by bending your knees as your feet touch down.You should land on both feet simultaneously.
6. Step down and repeat.

If you have difficulty landing in a balanced way, the platform may be too high. A variation for advanced athletes is to jump down backwards from the box. Only try this once you have mastered the basic form.

1. Stand with your feet hip width apart. Your toes should be pointing straight ahead or only slightly outward.
2. Cross your arms in front of your body, place your hands behind your head or at the sides of your head.
3. Keep your weight on your heels and bend your knees while lowering your hips towards the ground as if you are sitting down on a chair.
4. Keep your back straight at all times.
5. Continue until you feel a slight stretch in your quadriceps. Do not let your knees extend out beyond the level of your toes.
6. Pause for a count of one.
7. In an explosive movement, drive down through your heels pushing yourself up of the floor with your quads.
8. At the same time extend our arms out above you.
9. Land with your knees slightly bent to absorb the impact.
10. Repeat

1. Begin standing tall with a tight core. Your chest will be up and your gaze will be straight ahead. Bend at the knees and drive your hips back as you lower yourself into a squat position.
2. Launch yourself up while simultaneously twisting to the other side. Your body will perform a 180 degree turn in midair.
3. Land with bent knees and immediately go right into another jump squat, turning to the starting position. Repeat this alternating pattern.

1. Begin by standing tall with a straight back and tight core. Slightly bend the knees and push the hips back. Bring the hands up and keep the chest up. Feet should be shoulder-width apart.
2. Jump and launch yourself forward. Swing your arms back and use the momentum.
3. Land in a squat position. Knees are bent and hips are back. Return to starting position and repeat.

1. Place an exercise step or something similar on the floor in front of you. It should be two or three inches high.
2. Holding a dumbbell in each hand, place your toes and the balls of your feet on the step. Make sure the arches of your feet are not on the step and your heels are on the floor.
3. Raise your heels as high as possible by pushing through the balls of your feet and toes while extending your ankles. Hold for a count of one.
4. Return to the starting position by bending your ankles until you feel a stretch in your calves.
5. Repeat.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Sitting on a calf raise machine, position your upper thighs under the top pad. The pad should be resting just above your knees.
2. Place the balls of your feet on the foot plate.
3. Keeping the balls of your feet in position, lower your heels as far as possible.
4. Slowly raise your heels as if standing on your toes. Continue as far as possible until you feel a stretch in your lower calves. Hold for a count of one.
5. Slowly lower your heels back to the starting position and repeat.

If the machine isn't equipped with foot plates, you can use barbell plates placed under the machine to increase your range of motion. Don't

1. Set up two weight plates on the ground next to each other. Position a loaded barbell across your trap muscles. Step on to the weight plates with the balls of your feet.
2. With a tight core and flat back, raise yourself up with your feet only. Pause at the top of the raise.
3. Slowly lower yourself down but do not touch the ground. Raise yourself back up.
4. Repeat.

1. Place a chair or wooden box in front of you. Brace your core and lower back.
2. Step up on the box with your left leg, swinging your arms as you do so.
3. Take your right knee and raise it in front of you, into the air.
4. Step down with your right leg. Repeat exercise with the other leg. Keeping alternating sides.

1. Stand straight – that’s the starting position. Step forward with your left leg and slowly lower your body until your front knee is bent at least 90 degrees, while your rear knee is just off the floor. Keep your torso upright the entire time. Look forward.
2. Pause, then push off your left foot off the floor and return to the starting position as quickly as you can.
3. On your next rep, step forward with your right leg. Continue to alternate back and forth—doing one rep with your left, then one rep with your right.

1. Standing with a braced core and flat back, bring your hands together at chest height. Position your feet to be at hip-width.
2. Beginning with the right foot, step backward and across your left foot. Simultaneously, bend the left knee and drop it towards the ground.
3. Stop when the front right knee is parallel with the ground. Push off the ground with your right foot and return to the starting position.

• Place your feet shoulder-width apart. Bend at the knees while driving your hips back.
• Keep your chest up and your core tight.
• Remain in a squat stance as you forcefully push off the ground, jumping to the right side.
• Check your form then repeat, jumping to the other side.
• Keep alternating between sides.

1. Stand with your feet hip width apart. Your toes should be pointing straight ahead or only slightly outward.
2. Cross your arms in front of your body, place your hands behind your head or at the sides of your head.
3. Keep your weight on your heels and bend your knees while lowering your hips towards the ground as if you are sitting down on a chair.
4. Keep your back straight at all times.
5. Continue until you feel a slight stretch in your quadriceps. Do not let your knees extend out beyond the level of your toes.
6. Pause for a count of one.
7. In an explosive movement, drive down through your heels pushing yourself up of the floor with your quads.
8. At the same time extend our arms out above you.
9. Land with your knees slightly bent to absorb the impact.
10. Repeat

1. Begin by standing tall with a straight back and tight core. Slightly bend the knees and push the hips back. Bring the hands up and keep the chest up. Feet should be shoulder-width apart.
2. Jump and launch yourself forward. Swing your arms back and use the momentum.
3. Land in a squat position. Knees are bent and hips are back. Return to starting position and repeat.

1. Set a barbell on a rack at your shoulder height.
2. Step under the bar and rest the back of your shoulders against the bar. Do not put the bar on your neck.
3. Hold on to the bar using an overhand grip so that your palms are facing forward.
4. Lift the barbell off the rack by pushing up with your legs while straightening your torso.
5. Step away from the rack and position your legs in a wider than shoulder width position and with your toes slightly pointed out.
6. Keep your head up and look straight ahead at all times, as looking down will put you off balance.
7. Ensure your back is straight. This is the start position.
8. As you inhale, slowly lower the bar by bending your knees while keeping a straight posture with your head up.
9. Continue down until the angle between you upper legs and calves is slightly less than 90-degrees . As a guide, the front of your knees should be in line with your toes. Do not allow your knees to extend out beyond your toes.
10. Hold for a count of one.
11. As you exhale, raise the bar back to the start position, by pushing through your heels as you straighten your legs.
12. Pause for a count of one.
13. Repeat.

This is an exercise which carries some risk. If you have back issues, substitute this exercise for the dumbbell squat or leg press instead. Never slouch your back forward as this can cause back injury. This exercise is best performed inside a squat rack for safety purposes.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Stand up straight with a tight core and flat back.
2. Position your feet wider than shoulder-width. Your toes should be facing out diagonally.
3. Holding a dumbbell with both hands in front of you, look straight ahead and bend at the knees while driving your hips backward. Your knees should be following your toes in a diagonal line.
4. Complete this wide stance squat by having your thighs come parallel with the ground.
5. Pause and slowly return to the starting position without locking your knees.
6. Repeat.

1. Select an appropriate weight for the plate you will be using. Place it next to where you will be laying.
2. Lay on flat on your back. Bend your knees, bringing your feet towards your hips. Bring the plate up and on to your pelvic area.
3. Tighten your core, flatten your back, and make sure your feet are firmly on the ground. Raise your hips up, creating a straight line from your head to your knees.
4. Slowly lower your hips and repeat the movement.

1. Position your upper back on a padded bench so that your body runs perpendicular to the bench. 
2. Align your feet so they are about shoulder width apart, with the soles flat on the box with your back and hips elevated from the floor.
3. Slowly lower your body into the gap between the bench and the box allowing your toes to point upward as you do so.
4. Lift your body upwards using the muscles in your lower back and glutes all the way to the top of the extension.
5. Tense you glutes holding the top position before lowering your body back down for the next rep.

1. Lie on an exercise mat with your knees bent so that your feet are flat on the floor. Keep your back straight.
2. Place your hands out to your sides palms flat for stability.
3. Raise your glutes off the floor by extending your hips upward while pushing down through you heels.
4. Continue until your back, hips and thighs are in a straight line. Hold for a count of one.
5. Return to the start position by lowering your hips back to the floor.
6. Pause then repeat.