Beach Bunny Essentials (abs, back, booty)

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. Stand in front of a sturdy bench, box or other flat non slip surface that’s high enough that you must use that you have to use a lot of effort in order to jump up on top of it.
2. Stand with your feet shoulder width apart.
3. Bend your knees as if crouching or performing a squat.
4. In an explosive movement, push through your feet to jump up onto the landing area.
5. Make a soft landing by bending your knees as your feet touch down.You should land on both feet simultaneously.
6. Step down and repeat.

If you have difficulty landing in a balanced way, the platform may be too high. A variation for advanced athletes is to jump down backwards from the box. Only try this once you have mastered the basic form.

1. Stand with your feet hip width apart. Your toes should be pointing straight ahead or only slightly outward.
2. Cross your arms in front of your body, place your hands behind your head or at the sides of your head.
3. Keep your weight on your heels and bend your knees while lowering your hips towards the ground as if you are sitting down on a chair.
4. Keep your back straight at all times.
5. Continue until you feel a slight stretch in your quadriceps. Do not let your knees extend out beyond the level of your toes.
6. Pause for a count of one.
7. In an explosive movement, drive down through your heels pushing yourself up of the floor with your quads.
8. At the same time extend our arms out above you.
9. Land with your knees slightly bent to absorb the impact.
10. Repeat

1. Begin standing tall with a tight core. Your chest will be up and your gaze will be straight ahead. Bend at the knees and drive your hips back as you lower yourself into a squat position.
2. Launch yourself up while simultaneously twisting to the other side. Your body will perform a 180 degree turn in midair.
3. Land with bent knees and immediately go right into another jump squat, turning to the starting position. Repeat this alternating pattern.

1. Begin by standing tall with a straight back and tight core. Slightly bend the knees and push the hips back. Bring the hands up and keep the chest up. Feet should be shoulder-width apart.
2. Jump and launch yourself forward. Swing your arms back and use the momentum.
3. Land in a squat position. Knees are bent and hips are back. Return to starting position and repeat.

1. Position yourself on all fours on a mat.
2. Position your hands underneath your shoulders and place your knees under your hips.
3. Keep your right knee bent at 90 degrees and flex the foot as you lift the knee until it is level with the hip.
4. Lower the knee without touching the floor and repeat the lift.
5. Once you’ve completed the reps on the right leg, switch legs.

1. Position yourself on all fours with knees underneath the hips and wrists under the shoulders.
2. Engage your abs and keep your spine neutral, pulling the shoulder blades towards the hips.
3. Lengthen the left leg until it is straight out and in line with your hips while simultaneously raising and straightening your right arm until it is parallel to the floor. Keep your head and shoulders aligned at all times.
4. Gently lower your arm and leg back to the starting position and alternate with the other arm and leg.

1. Lie face down on a flat bench with your hips on the edge of the bench. Fully extend your legs and raise your feet up from the floor so that they are in line with your body .
2. Place your arms on top of the bench, using them to hold on to the front edge of the bench for stability.
3. Squeeze your glutes and hamstrings and straighten your legs until they are level with your hips. This is the start position.
4. Start the exercise by raising you left leg higher than your right leg.
5. Then lower the left leg as you lift the right leg and so on.
6. Alternate in this manner  until you have done all repetitions for each leg.

When performing this exercise, breathe normally. As your strength increases, you can add ankle weights.

1. Select an appropriate weight for the plate you will be using. Place it next to where you will be laying.
2. Lay on flat on your back. Bend your knees, bringing your feet towards your hips. Bring the plate up and on to your pelvic area.
3. Tighten your core, flatten your back, and make sure your feet are firmly on the ground. Raise your hips up, creating a straight line from your head to your knees.
4. Slowly lower your hips and repeat the movement.

1. Position your upper back on a padded bench so that your body runs perpendicular to the bench. 
2. Align your feet so they are about shoulder width apart, with the soles flat on the box with your back and hips elevated from the floor.
3. Slowly lower your body into the gap between the bench and the box allowing your toes to point upward as you do so.
4. Lift your body upwards using the muscles in your lower back and glutes all the way to the top of the extension.
5. Tense you glutes holding the top position before lowering your body back down for the next rep.

1. Lie on an exercise mat with your knees bent so that your feet are flat on the floor. Keep your back straight.
2. Place your hands out to your sides palms flat for stability.
3. Raise your glutes off the floor by extending your hips upward while pushing down through you heels.
4. Continue until your back, hips and thighs are in a straight line. Hold for a count of one.
5. Return to the start position by lowering your hips back to the floor.
6. Pause then repeat.

1. Hold a kettlebell with both hands in an over hand grip.
2. Stand straight, with your legs slightly wider than shoulder width apart.
3. Lean forward at your waist slightly and bend your knees as if getting ready to squat.
4. Keep your back arched and your head facing forward.
5. Let your arms hang loosely.
6. Swing the kettlebell back between your legs while exhaling.
7. In an explosive movement, force the kettle forward and back up in front of you, either to eye level or above head height by thrusting forward with your hips and rotating your shoulders.
8. Continue for the desired number of repetitions or time.

1. Set up a barbell in a rack at shoulder height.
2. In front of the rack, place an aerobic or exercise step on the floor.
3. Position yourself under the barbell so it is resting across your shoulder. Not on your neck.
4. Stand up straight to lift the barbell from the rack and walk forward to the step.
5. Place one foot on the step and push down through your heel while straightening your leg to lift yourself up onto the step and place your other foot flat on the step.Hold fora count of one.
6. Step down with the opposite leg to the one you started the movement with.
7. Repeat all the repetitions of the set for your chosen lead leg befor changing to the other.

For novices or people with balance problems, this exercise can be performed using only body weight or dumbbells until you are confident and your strength has increased. You can also perform this movement by alternating between legs.

1. Set up a  barbell on a rack  at just below shoulder level.
2. Step under the bar placing the back of your shoulders under it. Do not rest the bar on your neck.
3. Grip the the bar using an overhand grip with your elbows bent to90 degrees or slightly more. Less of an angle means your hands are too close together which can cause instability of balance.
4. Lift the barbell clear of the rack by  pushing with your legs, while straightening your torso.
5. Step away from the rack.
6. Step forward with your right leg and squat down through your hips. Keep your back straight  and be careful to maintain your balance. Inhale as you lower yourself.
7. Continue lowering your body until your left knee is nearly touching the floor.
8. Return to the start position b pushing through your heel,exhaling as you do so.
9. Complete all the repetitions for one leg before switching.

This exercise requires a great deal of balance. If you suffer from balance problems, it is best either avoid it, or just use your own body weight while holding on to a steady object. Never perform any exercise with a barbell on your back if you suffer from balance problems. For safety, this exercise is best performed inside a squat rack.

1. Holding a dumbbell in each hand, stand with your feet shoulder width apart.
2. Keep your shoulders back. And your back straight.
3. Take a long stride forward with your right leg. Your right foot should be in a position, that when you bend your right knee, your upper and lower leg form a 90 degree angle.
4. Slowly bend both your knees, to lower your hips until your left (rear) knee is just above the floor. Hold for a count of one.
5. Return to the start position by slowly straightening your legs and raising your body back to a standing position.
6.  Complete all the repetitions for one set full set, then switch legs, or you can alternate between legs for each rep.

Do not let your knee travel past your toes in the down position as this can cause instability and injury.

1. Stand up straight while holding two dumbbells. Maintain a tight core and flat back as you carefully place your right foot on top of a bench behind you with toes facing down. 
2. Bend at the front knee as you drop the back knee, maintaining perfect form. Front knee should not go over the toes.
3. Allow your thigh to come to parallel with the floor.
4. Pause then slowly return to the starting position without locking out your knee.
5. Repeat then switch sides once set is complete.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. Using a squat or barbell rack, set the barbell at shoulder height.
2. Position yourself so the barbell is resting on your shoulders and you are facing away from the rack.
3. Stand up to lift the barbell clear of the rack and take a few steps away from the rack.
4. Position your feet slightly less than shoulder width apart.
5. Keep your legs straight and bend forward at the hips.
6. Continue bending forward until you feel a mild stretch in your hamstrings. (Do not try to bend past the mild stretching sensation. As flexibility increases so does the range of motion.) Hold for a count of one.
7. Return to the starting position by straightening from the hips. Repeat.

Start with lower weights when performing this exercise for the first few times to allow your body to adapt to the movement. This exercise can also be done with your knees slightly bent to emphasize use of your glutes.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. Lie face down on a hyper extension bench with your upper thighs and lower hips on the support pad. You must be able to bend at the waist freely.
2. Lock your ankles under the footpads.
3. Start with your body in a straight line head to toe.
4. Place your arms across your chest, behind or at the side of your head.
5. Slowly bend forward by relacing your, back and abdominal muscles.
6. Continue as far as possible without rounding your back or raising your thighs from the support pad. You should feel a slight stretch in your hamstrings.Hold for a count of one.
7. Return to the start position by contracting your back and abdominal muscles until your body is once again straight. Do not arch your back up at the end of the movement. Pause and repeat.

As your strength and flexibility increase, you can hold a weight plate against your chest for extra resistance.

1. Lie face down on a mat, with your arms fully extended above your head and your legs fully extended behind you.
2. Lift your chest, arms and legs off the floor by arching your back. Only the tops of your quads and your lower abdomen should be in contact with the floor.
3. Hold for a count of 2 while squeezing your abdominals and obliques.
4. Return to the starting position for a count of one, then repeat.

This exercise can be done using one arm and it's opposite leg at a time. For example, right arm and left leg raised while your left arm and right leg remain on the floor. This method of execution allows you to use the free hand to push down on the floor to lift your chest higher from the ground.

1. Position yourself on all fours with knees underneath the hips and wrists under the shoulders.
2. Engage your abs and keep your spine neutral, pulling the shoulder blades towards the hips.
3. Lengthen the left leg until it is straight out and in line with your hips while simultaneously raising and straightening your right arm until it is parallel to the floor. Keep your head and shoulders aligned at all times.
4. Gently lower your arm and leg back to the starting position and alternate with the other arm and leg.

1. Lay on a yoga/exercise mat or towel with your arms outstretched, palms down in front of you, and your legs outstretched with your soles facing up.
2. Simultaneously lift your right arm and left leg off the floor.
3. When you reach your flexion point, hold for a second before slowly lowering back down to the floor.
4. Repeat the same movement with your left arm and right leg.

1. Position yourself on all fours on a mat.
2. Position your hands underneath your shoulders and place your knees under your hips.
3. Keep your right knee bent at 90 degrees and flex the foot as you lift the knee until it is level with the hip.
4. Lower the knee without touching the floor and repeat the lift.
5. Once you’ve completed the reps on the right leg, switch legs.

1. Place two dumbbells or kettlebells on the floor about shoulder width apart.
2. In a push up position, place your hands on the grip section of each bell for support.
3. Spread your legs to slightly wider than hip width apart with your toes supporting your weight. This is the start position.
4. Push down through one bell and at the same time “row” the opposite one upwards by retracting your shoulder and bending your elbow.
5. Hold for a count of one.
6. Your breathing should remain constant throughout the movement.
7. Lower the bell to the floor and without pause, then repeat the movement with your other arm.
8. When you have rowed both arms, that is one repetition.
9. Repeat for the desired number of repetitions.

This is an advanced level exercise. Lower strength and poor form has the potential for injury to the middle and lower back and wrists.

1. Lean forward into an incline bench
2. Using a neutral grip, hold a dumbbell in each hand so your palms are facing in.
3. Your arms should be fully extended and hanging straight down. This is the start position.
4. Pull your shoulder blades back and flex your elbows to pull the dumbbells up to your sides.
5. Hold and squeeze your shoulder and back muscles.
6. Return to the start position in a slow, controlled movement.
7. Repeat.

1. Stand tall with a tight core and flat back. Hold a pair of dumbbells at your side with an overhand grip. Bend slightly at the knees as you push your hips back. Keep your chest and head up. Upper body should be almost parallel with the floor.
2. With your elbows at a 60-degree angle, bring the dumbbells up. Pause when your upper arm is parallel with the floor. Contract the muscle then slowly return the dumbbells to the starting point.

1. Set up a cable station with a straight bar attached to the top pulley.
2. Sit on the seat facing the station. Keep your feet flat and planted firmly on the floor.
3. Using an overhand grip, hold the bar as wide as comfortable. (Your hands should be about 1 1/2 – 2 times body width apart.)
4. Lean back slightly without arching your back.
5. Pull the bar towards the top of your chest using your shoulders while arcing your elbows out to the sides of your body.
6. At the end of the movement squeeze you shoulders together slightly and hold for a count of one.
7. Return to the start position by arcing your elbows forward while relaxing your shoulders.
8. Repeat.

1. Standing under a pull-up bar, reach up and hold onto the bar with an overhand grip. Make sure your hands are about twice your shoulder width apart.
2. Keep your arms straight and hang from the bar so that your arms are taking all of your weight.
3. Keeping your body straight and not swinging your weight, pull your body up towards the bar by pulling your elbows down towards your torso at an angle.
4. Continue lifting until your chest is nearly touching the bar. You should feel a “squeeze” at the base of your lats (about midway down your back and to the side) as they contract.
5.  Once your lats have completely contracted at the top of the movement, slowly lower your body to the starting position.
6. Repeat.

By using a wide grip, your lats are doing most of the lift, rather than your biceps. It doesn't matter if you keep your legs straight or bent at the knees with your feet crossed. The important thing is that you do not use your legs to assist in lifting your body weight. As your strength increases, you can add weight by using a weight belt.

1. Lie flat on an exercise mat on the floor keeping your lower back straight with no arching of your spine and with your knees bent and feet flat on the floor.
2. Place your hands lightly on the sides of your head.
3. Curl your torso upwards so your shoulders are slightly raised off the floor..
4. Raise your knees until your thighs are at a right angle to the floor and your calves are parallel to the floor. This is the start position.
5. Slowly move your legs in a pedaling action as if you are riding a bicycle.
6. As you do so, exhale and bring your opposing elbow close to each knee by crunching to one side. Left elbow to right knee. Right elbow to left knee.
7. After each crunch, return to the start position inhaling as you do so.
8. Without pausing, repeat the movement to the other side.
9. Repeat without pausing for the desired number of repetitions to each side.

Do not use your hands to pull your head and neck up during this exercise. Doing so may cause injury. Concentrate on a slow rhythmic cycle from side to side with perfect form for each repetition.

1. Lie on your back. Bring your knees up to a 90-degree angle. Shins should be parallel to the floor. Place your hands behind your head and bring your shoulders off the ground.
2. Exhale and contract your abdominals. Bring your head towards your knees while moving your knees toward your chest.
3. Pause and return to the starting position.

1. Lie on an exercise mat, with your back flat, knees bent and your feet flat on the floor slightly wider than shoulder-width apart.
2. Fully extend your arms down the side of your body, palms facing in. This is the start position.
3. Exhaling, crunch your torso forward and to the right until you can touch your right heel with your right hand. Hold for a count of one.
4. Return to the starting position smooth motion, inhaling as you do so.
5. Repeat the movement, this time to your left side.
6. When you have completed the movement on both sides, you have done one repetition.
7. Repeat.

1. Lie on a mat with your hands under your buttocks and raise your legs slightly, keeping knees straight and ankles together.
2. Keep abs engaged and perform short kicks in an alternating fashion.
3. Repeat as needed and then lower legs to the ground.

1. Lie on a mat with your hands under your buttocks and raise your legs slightly, keeping knees straight and ankles together.
2. Keep abs engaged and perform short kicks in an alternating fashion.
3. Repeat as needed and then lower legs to the ground.

1. Place your forearms are on the pads or bars of the apparatus you are using and grip the handles or bars. Your arms should be bent at 90 degrees and your upper arms in a straight line with your sides.
2. Your torso should be straight and your lower back pressed against the pad of the bench if using one.
3. Keep your legs extended and pointing down to the floor. This is the start position.
4. Exhale and as you do so, lift your legs up in a smooth arc bending at the knees until your thighs are about parallel to the floor. Hold for a count of one.
5. Return to the start position in a smooth, controlled movement while inhaling.
6. Repeat.

Do not use momentum or swing your legs to perform this exercise. As your strength increases, you can rotate your pelvis forward at the top of the movement to engage more of your lower abdominal muscles. You can also keep your legs fully extended throughout the movement to increase the resistance and difficulty of the exercise.

1. Lie flat with hands under your buttocks.
2. Keep your knees together and pull them in towards you while moving your torso towards them (lift your head, neck and shoulders up).
3. Hold and then slowly return to starting position.

1. Stand a dumbbell on one of its plates about 2 feet away from the edge of a bench and sit comfortably on the edge of that bench, using you hand-grip for support. Fully extend your legs towards the dumbbell.
2. Using your amazing foot-eye coordination, pin each foot underneath the top plate of the standing dumbbell, on either side of its bar.
3. Bring your knees in towards your chest, taking care not to drop the dumbbell in the process, and hold them as close as you can to your chest for 1 second.
4. Extend the legs back down towards the floor to the starting position.

1. Adjust the pulley handle to chest height. Step out and away from the weight. Feet are shoulder-width. Stand with a tight core and flat back. Push the handle out in front of you. Keep elbows slightly bent.
2. Twist from the hips. Move arms across the body, achieving a full extension.
3. Return to starting position.
4. Once complete, do the same amount of sets/reps on the other side.

1. Secure a firm grip with both hands on an appropriately weighted dumbbell. Place your feet shoulder-width apart. Begin by moving the dumbbell up and over towards your right side.
2. Twist your body to bring the dumbbell down and to the left. Bend at the knees and drop your hips slightly. Make the motion of placing the dumbbell on the ground.
3. Repeat the movement, taking the dumbbell back up and overhead. Keep your arms straight throughout.

1. Sit on an exercise mat with your legs fully extended and your upper body upright.
2. Grip a weight plate between both hands.
3. Hold the plate out in front of your abdominals keeping your arms bent slightly.
4. Cross your your ankles and raise them off the floor slightly.
5. Bend your knees towards you slightly.
6. Lean back about 15 degrees to balance your body. This is the start position.
7. In a smooth motion,turn your torso to the left and touch the plate on the floor. Make sure you exhale as you do this.
8. Return to the start position inhaling as you do so.
9. Repeat the same movement, this time to your right side, again exhaling as you do so.
10. Return to start position and repeat.

When performing this exercise, use smooth controlled movements. Jerking or using momentum to swing the weight can cause serious lower back injury.

1. Sit on the end of a bench with your legs fully extended in front of you angled towards the floor slightly.
2. Grip the sides of the bench for stability.
3. Leaning back to about a 45-degree angle from the bench. This is the start position.
4. Pull your knees in toward you at the same time moving your torso towards them. Make sure you exhale as you perform this part of the movement. Hold for a count of one.
5. Return to the start position by extending your legs out and relaxing your abdominal muscles. Breathe in as you do this. Pause and repeat.

This exercise can also be performed on the floor by placing your arms to the sides and raising your legs off the floor slightly. slightly over the floor. More advanced athletes can use a dumbbell between their feet or attach a pulley to them for added resistance.

1. Lie flat with hands under your buttocks.
2. Keep your knees together and pull them in towards you while moving your torso towards them (lift your head, neck and shoulders up).
3. Hold and then slowly return to starting position.

1. Lie on your back on a mat with hands under your lower buttocks on either side to support your pelvis.
2. Legs straight out in front of you, ankles together and feet slightly off the floor.
3. Keep your knees straight and raise your legs by flexing the hips until they are completely flexed.
4. Return to starting position.

1. Lie face up with your legs straight and a swiss ball between your ankles.
2. Raise your shoulders and head slightly off the floor and keep your arms reached down at your sides with hands hovering just off the floor, palms facing down.
3. Engage your abs, squeeze your inner thighs and ankles into the ball and lift your legs up to a 45-degree angle.
4. Slowly lower the ball down until it gently touches the floor.

1. Stand a dumbbell on one of its plates about 2 feet away from the edge of a bench and sit comfortably on the edge of that bench, using you hand-grip for support. Fully extend your legs towards the dumbbell.
2. Using your amazing foot-eye coordination, pin each foot underneath the top plate of the standing dumbbell, on either side of its bar.
3. Bring your knees in towards your chest, taking care not to drop the dumbbell in the process, and hold them as close as you can to your chest for 1 second.
4. Extend the legs back down towards the floor to the starting position.

1. Lay on a mat with your arms flat by your sides and your glutes, hamstrings, and calves all resting on a Swiss ball.
2. Pull your heels into the Swiss ball allowing you to ‘grip’ the ball between your heels and glutes.
3. Putting pressure on your arms, roll your lower body back so that your glutes and lower back leave the ground with the Swiss ball held tightly.
4. Lower your back and glutes slowly back to the ground to complete one rep.

Note – Take care not to lower yourself too quickly, this may cause the Swiss ball (with you attached) to bounce in a strange manner.