Triceps

1. Lie on a flat bench with your feet flat on the floor. Make sure your back is completely flat on the bench, with no “arching” of your spine.
2. Grip the barbell with an overhand grip, shoulder width or slightly less than shoulder width apart. (Do not make your grip too narrow as it limits stability of the barbell which can lead to injury)
3. Push up using your chest and shoulders to lift the barbell above your body, then lower it slowly ( a count of 2) towards the centre of your chest. Hold for a count of one.
4. Without “bouncing” the weight, force the barbell back up over the middle of your chest, straightening your arms and locking your elbows once your arms are fully straight. Hold for a count of one.
5. Repeat.

1. Position yourself on all fours on a mat.
2. Place your hands in front of you and shoulder-width apart.
3. Now bring your hands in towards the center until the tips of your index fingers and tips of your thumbs are touching. This creates a diamond shape between your hands. Your elbows and wrists should be in line with your chest.
4. With your fingers facing forwards, lift off your knees so that your body forms a straight line and just your hands and toes touch the floor.
5. Keep you pelvis straight and abs engaged and aim to keep a straight back throughout the movement.
6. Bend your elbows and lower your body towards the floor, aiming to touch your chest to the top of your hands. Pause briefly.
7. Return to the starting position by extending your elbows and lifting your body off the floor again.

1. Position yourself on all fours on a mat.
2. Place your hands in front of you and shoulder-width apart.
3. Now bring your hands in towards the center until the tips of your index fingers and tips of your thumbs are touching. This creates a diamond shape between your hands. Your elbows and wrists should be in line with your chest.
4. With your fingers facing forwards, lift off your knees so that your body forms a straight line and just your hands and toes touch the floor.
5. Keep you pelvis straight and abs engaged and aim to keep a straight back throughout the movement.
6. Bend your elbows and lower your body towards the floor, aiming to touch your chest to the top of your hands. Pause briefly.
7. Return to the starting position by extending your elbows and lifting your body off the floor again.

1. Lie on a flat bench with your feet flat on the floor. Make sure your back is completely flat on the bench, with no “arching” of your spine.
2. Grip the barbell with an overhand grip, shoulder width or slightly less than shoulder width apart. (Do not make your grip too narrow as it limits stability of the barbell which can lead to injury)
3. Push up using your chest and shoulders to lift the barbell above your body, then lower it slowly ( a count of 2) towards the centre of your chest. Hold for a count of one.
4. Without “bouncing” the weight, force the barbell back up over the middle of your chest, straightening your arms and locking your elbows once your arms are fully straight. Hold for a count of one.
5. Repeat.

1. Get into position by placing your hands flat on the floor, directly below your shoulders.
2. Extend your legs out behind you, with only your toes and balls of your feet touching the floor.
3. Hold your body up and keep your back straight by tightening your abdominal muscles.
4. Your neck and head should be bent slightly back.
5. Lower your chest towards the ground by bending your elbows until your chest is just above the ground or you feel a stretching of your chest and shoulders. Hold for a count of one.
6. Press upwards from your chest and shoulders, straightening your arms as you return to the starting position. Hold for a count of one.
7. Repeat.

1. Lie flat on your back on a bench and position your feet flat on the floor on either side of the bench.
2. With a dumbbell in each hand, extend your arms over head until fully extended. Your palms should face one another and your hands should be close together.
3. Bend the elbows and lower the weights to either side of your head.
4. Extend your arms to return to the starting position.

1. Holding a preacher curl barbell with an overhand grip, carefully sit on a bench. Slowly lie back and bring the barbell above your head. Make sure that your feet are flat on the floor and your core is braced.
2. Keep the upper arms in place as you bend at the elbow and allow the forearms to slowly dip back towards your head.
3. Once the barbell reaches the bottom, pause and slowly push the barbell back to the starting position.

1. Holding a pair of dumbbells with an overhand grip, stand tall with your chest up and core braced. Bend at the hips while keeping your back completely flat.
2. Once your upper body is parallel with the floor, bring your upper arms to your sides. Begin by pushing the dumbbells back and behind you.
3. Pause at the top of the movement and feel the contraction in your triceps. Slowly lower the dumbbells and begin again.

1. Sit on a bench with back support.
2. Grip a dumbbell at one end using both hands. Your palms should be facing inward.
3. Hold the dumbbell overhead with your arms fully extended.  This is the the start position.
4. Keep your upper arms close to your head (biceps roughly level with your temples) and near to 90degrees to the floor.
5. Moving only your forearms, lower the dumbbell in a smooth arc behind your head until your forearms and biceps touch. Hold for a count of one.
6. Return to the start position by using the triceps to extend your arm and raise the dumbbell. Exhale as you do this.
7. Repeat.

This exercise can be performed standing. However, it places an extra strain on your back so is not recommended for people with lower back problems. You can also perform this exercise using an EZ bar or straight bar with a close grip behind your head, palms facing forward.

1. Lying on a flat bench, grab the barbell with an underhand grip. Hands will be shoulder-width apart. With a tight core and flat back, lift the barbell above, bringing it to chest level.
2. Slowly lower the bar until your upper arms are parallel with the floor. Pause, contract, and return to the starting position.

1. Position yourself with your back down on a flat bench placing the hands up on the bar using an underhand grip slightly wider than shoulder width apart.
2. After taking a deep breath in, extend the elbows and lift the bar up off the rack until elbows are extended but not locked. Pause for a brief movement as you fully extend your breath.
3. Lower the weight directly down to the chest as you breath inwards, keeping the movement pattern slow and steady.
4. Once just above the chest, pause, and then press directly up again, exhaling your breath.
5. Continue until all reps are completed and then re-rack the barbell.

1. Sit on a bench with back support.
2. Grip a dumbbell at one end using both hands. Your palms should be facing inward.
3. Hold the dumbbell overhead with your arms fully extended.  This is the the start position.
4. Keep your upper arms close to your head (biceps roughly level with your temples) and near to 90degrees to the floor.
5. Moving only your forearms, lower the dumbbell in a smooth arc behind your head until your forearms and biceps touch. Hold for a count of one.
6. Return to the start position by using the triceps to extend your arm and raise the dumbbell. Exhale as you do this.
7. Repeat.

This exercise can be performed standing. However, it places an extra strain on your back so is not recommended for people with lower back problems. You can also perform this exercise using an EZ bar or straight bar with a close grip behind your head, palms facing forward.

1. Attach a rope to the bottom pulley of a cable station.
2. Grip the rope with both hands using a neutral grip. Turn your body away from the cable station.
3. Fully extend your arms until your hands are directly above your head pointing to the ceiling.
4. Keep your elbows  close to your head. This is the start position.
5. Slowly lower the rope behind your head, keeping your upper arms stationary, inhaling as you do so.
6. When your triceps are fully extended, hold for a count of one while squeezing your triceps.
7. Return to the starting position by flexing your triceps  and extending your arms. Exhale as you do so.
8. Repeat.

This exercise can be performed  seated on a plain bench, or one that has a back support You  can also use a single dumbbell instead of the rope.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Push the handles of the band overhead while keeping a slight bend in the elbow. Brace your abdominals and do not arch your back.
3. Slowly lower your hands behind your head using only the forearms. The upper arms will stay in place with the elbow pointed up.
4. Push the handles back up, focusing the tension in the triceps.

1. Start by standing to the right of a flat bench with a dumbbell on the floor to your right.
2. Place your left knee on the bench with your left hand palm down n the bench in front of it. In this position, keep your back straight.
3. Pick up the dumbbell with your right hand using an overhand grip.
4. Raise your arm until it is in line with your body, keeping your elbow tucked into your side and bent to a 90 degree angle. Your forearm should be pointing straight down to the floor.
5. Extend your arm using your triceps to lift the weight until it is level with your shoulder.
6. Hold for a count of one while squeezing your tricep.
7. Lower to the starting position by bending your elbow to 90 degrees.Hold and repeat.
8. Complete the set for your right arm before changing stance to work your left arm.

Only your forearm should move during this exercise. Keep your elbow in line with your shoulders at all times throughout the movement.

1. Holding a pair of dumbbells with an overhand grip, stand tall with your chest up and core braced. Bend at the hips while keeping your back completely flat.
2. Once your upper body is parallel with the floor, bring your upper arms to your sides. Begin by pushing the dumbbells back and behind you.
3. Pause at the top of the movement and feel the contraction in your triceps. Slowly lower the dumbbells and begin again.

1. Attach a resistance band to a door frame or other stable surface. Grab the handles of the band and walk backward until the slack tightens.
2. Bend slightly at the knees and forward at the hips. Maintain a flat back throughout.
3. Bring your upper arms up and tight to your side. From here, you will pull the band back using the forearms only. The contraction will be felt exclusively in the triceps.
4. Slowly return to the starting position and begin again.

1. Holding a pair of water bottles with an overhand grip, stand tall with your chest up and core braced. Bend at the hips while keeping your back completely flat.
2. Once your upper body is parallel with the floor, bring your upper arms to your sides. Begin by pushing the water bottles back and behind you.
3. Pause at the top of the movement and feel the contraction in your triceps. Slowly lower the water bottles and begin again.

1. Set up a cable station with a straight bar on attached to the top pulley.
2. Grip the bar with an overhand grip,with your hands slightly less than shoulder width apart.
3. Position your feet shoulder width apart,with knees slightly bent for stability.
4. Pull the bar down until your forearms are parallel to the floor with your elbows close to your body and your wrists locked in a straight position. This is your staring point.
5. Moving only your forearms, push the bar down towards the floor until your arms are fully extended and you feel a stretch in your triceps. Hold for a count of one and squeeze your triceps.
6. Return to the start position moving your forearms only. Hold for a count of one then repeat.

Do not move your elbows or swing your hips for momentum during this movement.

1. Holding a pair of dumbbells with an overhand grip, stand tall with your chest up and core braced. Bend at the hips while keeping your back completely flat.
2. Once your upper body is parallel with the floor, bring your upper arms to your sides. Begin by pushing the dumbbells back and behind you.
3. Pause at the top of the movement and feel the contraction in your triceps. Slowly lower the dumbbells and begin again.

1. Set up 2 flat benches opposite each other. They should be roughly the distance of your hips to the floor apart.
2. Stand with your back to one bench,facing the other, then crouch down placing your palms behind you on the edge of the bench. Your arms should be fully extended at shoulder width, with your fingers facing forward.
3. Place the heels of your feet on the other bench. Keep your legs fully extended.
4. Have a spotter place a barbell weight plate or dumbbell on your lap. This is the start position.
5. Slowly lower yourself down by bending your elbows,until they are at 90 degrees or slightly less. Hold for a count of one.
6. Return to the starting position by pushing yourself up using only your triceps to straighten your arms. Hold then repeat

You will need a spotter to help you with this exercise. Trying to place the weight in your own lap once in position can cause instability and increase the risk of injury. Have your spotter remain with you throughout your set to ensure the weights don't slide off causing injury.

1. Sit on a chair with your hands either next to your hips or slightly under the hips.
2. Lift up onto your hands and bring your hips forward.
3. Bend your elbows and lower your hips down, keeping shoulders down and hips close to the chair.
4. Push back up but don’t lock your elbows and repeat.

1. Stand with feet shoulder-width apart. Core is tight and back is flat. Hold a barbell with an overhand grip. Hands should be closer than shoulder-width.
2. Bring the barbell above your head with arms fully extended. Keep the elbows up and the upper arm in place. Lower the barbell behind your head until your forearms touch your biceps. Return to the top of the movement.

1. Sit on a bench with back support.
2. Grip a dumbbell at one end using both hands. Your palms should be facing inward.
3. Hold the dumbbell overhead with your arms fully extended.  This is the the start position.
4. Keep your upper arms close to your head (biceps roughly level with your temples) and near to 90degrees to the floor.
5. Moving only your forearms, lower the dumbbell in a smooth arc behind your head until your forearms and biceps touch. Hold for a count of one.
6. Return to the start position by using the triceps to extend your arm and raise the dumbbell. Exhale as you do this.
7. Repeat.

This exercise can be performed standing. However, it places an extra strain on your back so is not recommended for people with lower back problems. You can also perform this exercise using an EZ bar or straight bar with a close grip behind your head, palms facing forward.

1. Attach a rope to the bottom pulley of a cable station.
2. Grip the rope with both hands using a neutral grip. Turn your body away from the cable station.
3. Fully extend your arms until your hands are directly above your head pointing to the ceiling.
4. Keep your elbows  close to your head. This is the start position.
5. Slowly lower the rope behind your head, keeping your upper arms stationary, inhaling as you do so.
6. When your triceps are fully extended, hold for a count of one while squeezing your triceps.
7. Return to the starting position by flexing your triceps  and extending your arms. Exhale as you do so.
8. Repeat.

This exercise can be performed  seated on a plain bench, or one that has a back support You  can also use a single dumbbell instead of the rope.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Push the handles of the band overhead while keeping a slight bend in the elbow. Brace your abdominals and do not arch your back.
3. Slowly lower your hands behind your head using only the forearms. The upper arms will stay in place with the elbow pointed up.
4. Push the handles back up, focusing the tension in the triceps.

1. Position yourself on all fours on a mat.
2. Place your hands in front of you and shoulder-width apart.
3. Now bring your hands in towards the center until the tips of your index fingers and tips of your thumbs are touching. This creates a diamond shape between your hands. Your elbows and wrists should be in line with your chest.
4. With your fingers facing forwards, lift off your knees so that your body forms a straight line and just your hands and toes touch the floor.
5. Keep you pelvis straight and abs engaged and aim to keep a straight back throughout the movement.
6. Bend your elbows and lower your body towards the floor, aiming to touch your chest to the top of your hands. Pause briefly.
7. Return to the starting position by extending your elbows and lifting your body off the floor again.

1. Lie on a flat bench with your feet flat on the floor. Make sure your back is completely flat on the bench, with no “arching” of your spine.
2. Grip the barbell with an overhand grip, shoulder width or slightly less than shoulder width apart. (Do not make your grip too narrow as it limits stability of the barbell which can lead to injury)
3. Push up using your chest and shoulders to lift the barbell above your body, then lower it slowly ( a count of 2) towards the centre of your chest. Hold for a count of one.
4. Without “bouncing” the weight, force the barbell back up over the middle of your chest, straightening your arms and locking your elbows once your arms are fully straight. Hold for a count of one.
5. Repeat.

1. Get into position by placing your hands flat on the floor, directly below your shoulders.
2. Extend your legs out behind you, with only your toes and balls of your feet touching the floor.
3. Hold your body up and keep your back straight by tightening your abdominal muscles.
4. Your neck and head should be bent slightly back.
5. Lower your chest towards the ground by bending your elbows until your chest is just above the ground or you feel a stretching of your chest and shoulders. Hold for a count of one.
6. Press upwards from your chest and shoulders, straightening your arms as you return to the starting position. Hold for a count of one.
7. Repeat.