BUTT

1. Set up an adductor machine by selecting and appropriate weight and adjusting the seat and leg pads to a comfortable position.
2. If fitted, grasp the handles on each side of the machine.
3. Keep your entire upper body straight and stationary with your back pressed firmly against the back rest. This is the start position.
4. While exhaling, press against the legs pads of the machine with your legs, and bring your thighs close together.
5. When you feel a slight stretching in your adductors, pause for a count of one squeezing them as you do so.
6. In a controlled movement, return to the start position, inhaling as you do so.
7. Repeat.

• Standing sideways with your left side facing the weight stack of a pulley machine, attach an ankle cuff to the right ankle.
• Hold the machine for balance if you need to and slowly lift your right leg up to the right side.
• Pause and slowly return your right leg to starting position.
• Repeat the movement.

1. Lie on your right side on top of a yoga mat or other soft surface.
2. Brace your core and make sure your body is in a straight line. Keep your right hand on the ground and your left hand on your hip.
3. Slowly lift the left leg into the air, keeping it straight during the exercise.
4. Slowly lower your left leg. Complete the set then repeat with the other leg.

1. On a mat or comfortable surface, lie on your left side. Place your left hand behind your head while placing your right hand across your body.
2. Bend your stacked knees so that your feet are behind you. Begin the movement by lifting the right knee up while keeping the feet together.
3. Pause at the top of the movement and slowly lower your right knee down to the starting position.

1. Stand upright and clasp your hands behind your head.
2. Take one step forward into a split stance.
3. Drop into a split squat so that your leading thigh is parallel to the floor.
4. Push up from the balls of your feet rapidly to jump up, jumping as high as you can and
5. switching legs midair.
6. Land in the opposite stance dropping back down into a squat.
7. Repeat.

1. Stand with your feet hip width apart. Your toes should be pointing straight ahead or only slightly outward.
2. Cross your arms in front of your body, place your hands behind your head or at the sides of your head.
3. Keep your weight on your heels and bend your knees while lowering your hips towards the ground as if you are sitting down on a chair.
4. Keep your back straight at all times.
5. Continue until you feel a slight stretch in your quadriceps. Do not let your knees extend out beyond the level of your toes.
6. Pause for a count of one.
7. In an explosive movement, drive down through your heels pushing yourself up of the floor with your quads.
8. At the same time extend our arms out above you.
9. Land with your knees slightly bent to absorb the impact.
10. Repeat

• Stand straight with a tight core and your chest up.
• You will be in a classic lunge position. Step forward and be sure to keep your front knee bent. At the same time, extend the back leg.
• Your back knee should be slightly bent.
• Place your hands on your hips. If you want a challenge, place them straight above the head.
• Using all of your force, jump into the air. Simultaneously, switch your leg stance in midair.
• Land in the lunge position and repeat.

1. Set up the barbell on the squat rack so that it is at the same height as your upper chest.
2. Position your body under the bar, with knees bent so that the bar is resting high on the back of your shoulders.
3. Grip the bar with your hands comfortably wider than your shoulders.
4. Slowly straighten your legs to push upwards, lifting the barbell from the rack and take one step forward.
5. Stand with your legs shoulder width apart.
6. Bend your knees forward and allow your hips to bend back as if sitting down,
7. Continue this movement down until your thighs are parallel to the floor or slightly more, making sure your knees are pointing in the same direction as your feet.
8. Hold for a count of one.
9. Push up through your heels while straightening your hips and knees, until you are standing in the start position.
10. Make any adjustments necessary to your stance and grip before continuing on the next repetition.

Do not rest the bar on your neck. Keep your head facing forward at all times. Keep your back straight throughout the entire movement.

1. Begin by positioning a barbell at or just below shoulder level in the squat rack. Behind the squat rack, place a tall wooden box or chair. Place yourself underneath the barbell. Make sure the bar is across your upper traps and NOT on your neck.
2. Place your feet outside of shoulder-width with your toes pointed slightly out. Brace your core and keep your chest up.
3. Bend at the knees as you drive your hips back. Lower yourself slowly until your butt touches the box. Pause then drive your hips forward to return to the starting position.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Begin the movement by stepping on to a resistance band with your feet at shoulder-width, toes pointed slightly out.
2. Bring your hands to your shoulders, keeping the handles of the band behind your shoulders. Brace your core and keep your chest up.
3. Bend first at the knees then at the hips. Be sure to keep the chest up and abdominals tight. There should be no arch in your back.
4. Pause when your thighs are parallel with the floor, then slowly return to the starting position, feeling the tension from the band in your quadriceps.

1. Place a barbell in a clear space on the floor. (Make sure there are no obstructions in your way.
2. Stand facing the barbell with your legs about 4-6 inches from the bar.
3. Place your feet shoulder width apart.Your feet can be pointed straight ahead or turned outwards slightly.
4. Squat down, keeping your back straight and grip the bar with an overhand grip at shoulder width.
5. Keep your arms fully extended and stand up with the barbell.
6. As you lift the barbell, your hips and shoulders should rise together and your back should be straight.
7. As you reach the top of the lift and are standing straight, rotate your shoulders back slightly until you feel a slight stretch in them.
8. Lower the barbell back to the floor in the same squatting motion you used to lift it.

This exercise can be very dangerous if performed incorrectly. If you are a novice, only perform this exercise with an experienced trainer's supervision.

1. Place two dumbbells on the floor.
2. Stand facing the dumbbells with your feet shoulder width apart.
3. Bend knees and hips to lower your torso in a squatting movement,keep your back straight.
4. At the bottom of the squat grip the dumbbells with an overhand grip,keeping your arms fully extended.
5. Return to an upright position holding the dumbbells with your palms facing towards your body and extending your hips forward. Do not round your back.
6. Return the dumbbells to the floor in the same manner you picked them up.
7. Repeat.

1. Holding the handles of the resistance band, step on to the middle. Place your feet at shoulder-width with toes pointing forward. Tighten your core and keep your chest up.
2. Bend your knees slightly and drive your hips back but NOT lower than your knees. Again, keep the chest up. This is the starting position.
3. Forcefully contract your glutes, driving them forward. Do not just lean back. Your glutes should be fully contracted. Pause then return to the starting position.

1. Stand up straight with a tight core and flat back.
2. Position your feet wider than shoulder-width. Your toes should be facing out diagonally.
3. Holding a dumbbell with both hands in front of you, look straight ahead and bend at the knees while driving your hips backward. Your knees should be following your toes in a diagonal line.
4. Complete this wide stance squat by having your thighs come parallel with the ground.
5. Pause and slowly return to the starting position without locking your knees.
6. Repeat.

1. Set a barbell on a rack at your shoulder height.
2. Step under the bar and rest the back of your shoulders against the bar. Do not put the bar on your neck.
3. Hold on to the bar using an overhand grip so that your palms are facing forward.
4. Lift the barbell off the rack by pushing up with your legs while straightening your torso.
5. Step away from the rack and position your legs in a wider than shoulder width position and with your toes slightly pointed out.
6. Keep your head up and look straight ahead at all times, as looking down will put you off balance.
7. Ensure your back is straight. This is the start position.
8. As you inhale, slowly lower the bar by bending your knees while keeping a straight posture with your head up.
9. Continue down until the angle between you upper legs and calves is slightly less than 90-degrees . As a guide, the front of your knees should be in line with your toes. Do not allow your knees to extend out beyond your toes.
10. Hold for a count of one.
11. As you exhale, raise the bar back to the start position, by pushing through your heels as you straighten your legs.
12. Pause for a count of one.
13. Repeat.

This is an exercise which carries some risk. If you have back issues, substitute this exercise for the dumbbell squat or leg press instead. Never slouch your back forward as this can cause back injury. This exercise is best performed inside a squat rack for safety purposes.

1. With your feet shoulder-width apart, stand with dumbbells as your sides with your palms facing each other.
2. Keeping your back straight and facing forward, squat down until your thighs are parallel to the floor.
3. Pause for one second.
4. Pushing up from your heels, raise back up to starting position and repeat.

1. Sit down on a leg press machine and place your legs on the platform directly in front of you at shoulder width.
2. Lower the safety bars holding the weighted platform  and press the platform all the way up until your legs are fully extended in front of you bot do NOT lock your knees. Your torso and legs should be at a 90degree angle to each other. This is the start position.
3. Inhaling, slowly lower the platform until your upper and lower legs form a 90-degree angle. Pause for a count of one,
4. Return to the starting position by pushing through the heels of your feet, engaging your quadriceps. Exhale as you do so.
5. Repeat.
6. After completing the desired number of repetitions, make sure you lock the safety pins of the machine before alighting.

Always check to make sure that when you re-rack the weight the platform is securely locked.

1. Position yourself on all fours on a mat.
2. Position your hands underneath your shoulders and place your knees under your hips.
3. Keep your right knee bent at 90 degrees and flex the foot as you lift the knee until it is level with the hip.
4. Lower the knee without touching the floor and repeat the lift.
5. Once you’ve completed the reps on the right leg, switch legs.

1. Position yourself on all fours with knees underneath the hips and wrists under the shoulders.
2. Engage your abs and keep your spine neutral, pulling the shoulder blades towards the hips.
3. Lengthen the left leg until it is straight out and in line with your hips while simultaneously raising and straightening your right arm until it is parallel to the floor. Keep your head and shoulders aligned at all times.
4. Gently lower your arm and leg back to the starting position and alternate with the other arm and leg.

1. Lie face down on a flat bench with your hips on the edge of the bench. Fully extend your legs and raise your feet up from the floor so that they are in line with your body .
2. Place your arms on top of the bench, using them to hold on to the front edge of the bench for stability.
3. Squeeze your glutes and hamstrings and straighten your legs until they are level with your hips. This is the start position.
4. Start the exercise by raising you left leg higher than your right leg.
5. Then lower the left leg as you lift the right leg and so on.
6. Alternate in this manner  until you have done all repetitions for each leg.

When performing this exercise, breathe normally. As your strength increases, you can add ankle weights.

1. Stand with your feet hip width apart. Your toes should be pointing straight ahead or only slightly outward.
2. Cross your arms in front of your body, place your hands behind your head or at the sides of your head.
3. Keep your weight on your heels and bend your knees while lowering your hips towards the ground as if you are sitting down on a chair.
4. Keep your back straight at all times.
5. Continue until you feel a slight stretch in your quadriceps. Do not let your knees extend out beyond the level of your toes.
6. Pause for a count of one.
7. In an explosive movement, drive down through your heels pushing yourself up of the floor with your quads.
8. At the same time extend our arms out above you.
9. Land with your knees slightly bent to absorb the impact.
10. Repeat

1. Begin standing tall with a tight core. Your chest will be up and your gaze will be straight ahead. Bend at the knees and drive your hips back as you lower yourself into a squat position.
2. Launch yourself up while simultaneously twisting to the other side. Your body will perform a 180 degree turn in midair.
3. Land with bent knees and immediately go right into another jump squat, turning to the starting position. Repeat this alternating pattern.

1. Place your feet at shoulder width apart while keeping your chest up and your abdominals braced.
2. Begin the movement by swinging your arms up towards your shoulders. At the same time, bend at the knees and drive your hips back like you’re sitting in a chair.
3. Once your upper thighs are parallel with the ground, pause, then drive your hips forward to return to the starting position.

1. Select an appropriate weight for the plate you will be using. Place it next to where you will be laying.
2. Lay on flat on your back. Bend your knees, bringing your feet towards your hips. Bring the plate up and on to your pelvic area.
3. Tighten your core, flatten your back, and make sure your feet are firmly on the ground. Raise your hips up, creating a straight line from your head to your knees.
4. Slowly lower your hips and repeat the movement.

1. Position your upper back on a padded bench so that your body runs perpendicular to the bench. 
2. Align your feet so they are about shoulder width apart, with the soles flat on the box with your back and hips elevated from the floor.
3. Slowly lower your body into the gap between the bench and the box allowing your toes to point upward as you do so.
4. Lift your body upwards using the muscles in your lower back and glutes all the way to the top of the extension.
5. Tense you glutes holding the top position before lowering your body back down for the next rep.

1. Lie on an exercise mat with your knees bent so that your feet are flat on the floor. Keep your back straight.
2. Place your hands out to your sides palms flat for stability.
3. Raise your glutes off the floor by extending your hips upward while pushing down through you heels.
4. Continue until your back, hips and thighs are in a straight line. Hold for a count of one.
5. Return to the start position by lowering your hips back to the floor.
6. Pause then repeat.